Vol 2 No 4 (2010): Mechanics, material science, industrial engineering and management

Published: 2010-08-31

Article

Investigation into the quality of thermally treated package lamination

Darius Kazlauskas, Jonas Sidaravičius
Abstract 335 | PDF Downloads 183 | DOI https://doi.org/10.3846/mla.2010.058

Page 5-9

Investigation into delamination

Valdemaras Limanovskis, Igor Iljin, Nikolaj Šešok
Abstract 337 | PDF Downloads 166 | DOI https://doi.org/10.3846/mla.2010.059

Page 10-12

Research on transfering the dynamic process by the spring

Vytautas Bučinskas, Jevgenij Dmitrijev
Abstract 352 | PDF Downloads 155 | DOI https://doi.org/10.3846/mla.2010.060

Page 13-17

The influence of formulating a damping solution on dot gain

Povilas Mikalainis, Jonas Sidaravičius, Vytautas Turla
Abstract 341 | PDF Downloads 154 | DOI https://doi.org/10.3846/mla.2010.061

Page 18-23

Adhesive analysis of painted coatings

Deividas Grinius, Irmantas Gedzevičius, Giedrius Garbinčius
Abstract 357 | PDF Downloads 499 | DOI https://doi.org/10.3846/mla.2010.062

Page 24-27

The methodology for calculating book backbones

Rūta Alūzienė, Jonas Sidaravičius
Abstract 342 | PDF Downloads 346 | DOI https://doi.org/10.3846/mla.2010.063

Page 28-30

Research of human postural balance parameters

Julius Griškevičius, Edita Jarmalienė, Inga Maskeliūnaitė
Abstract 345 | PDF Downloads 504 | DOI https://doi.org/10.3846/mla.2010.065

Page 35-38

About the possibility of using ultrasound in thermal spray technologies

Jelena Škamat, Algirdas V. Valiulis
Abstract 304 | PDF Downloads 196 | DOI https://doi.org/10.3846/mla.2010.066

Page 39-41

Research on the efficiency of side exhausters

Ina Tetsman, Vytautas Striška
Abstract 325 | PDF Downloads 193 | DOI https://doi.org/10.3846/mla.2010.067

Page 42-45

Review of devices for measuring angles and prospects for development

Giedrius Augustinavičius, Audrius Čereška
Abstract 328 | PDF Downloads 264 | DOI https://doi.org/10.3846/mla.2010.068

Page 46-49

Research on the efficiency of drinking water aeration systems

Andrius Styra, Vytautas Striška, Vadim Mokšin
Abstract 389 | PDF Downloads 169 | DOI https://doi.org/10.3846/mla.2010.069

Page 50-52

Page 53-58

Sorting plastic waste in hydrocyclone

Ernestas Šutinys, Vytautas Striška
Abstract 429 | PDF Downloads 232 | DOI https://doi.org/10.3846/mla.2010.071

Page 59-61

Protection of intellectual property in pharmaceutical industry

Vitalija Česiulytė, Eligijus Toločka, Rolandas Strazdas
Abstract 375 | PDF Downloads 194 | DOI https://doi.org/10.3846/mla.2010.072

Page 62-64

Page 69-72

Methodical aspects of creativity stimulation for the purposes of innovation development

Rolandas Strazdas, Rimvydas Bareika, Eligijus Toločka
Abstract 381 | PDF Downloads 771 | DOI https://doi.org/10.3846/mla.2010.076

Page 77-82

Research on cutting the plasma of aluminium alloys

Mindaugas Jašinskas, Irmantas Gedzevičius, Giedrius Garbinčius, Justinas Gargasas
Abstract 359 | PDF Downloads 220 | DOI https://doi.org/10.3846/mla.2010.077

Page 83-87

The influence of feed rate on surface roughness of TIC–WC carbide and Al2O3 ceramics SAWN-OFF with inner edge of diamond disc

Raimundas Mikolaitis, Valdas Bukauskas, Vadim Mokšin, Vytautas Striška
Abstract 356 | PDF Downloads 151 | DOI https://doi.org/10.3846/mla.2010.078

Page 88-90

Research of defects in spur gear

Viktor Skrickij
Abstract 310 | PDF Downloads 226 | DOI https://doi.org/10.3846/mla.2010.079

Page 91-94

A case study on improving the process of decision making in industrial companies

Valdas Bernatavičius, Vilmantė Juteikienė
Abstract 377 | PDF Downloads 256 | DOI https://doi.org/10.3846/mla.2010.081

Page 98-102

Page 103-106