Vol 6 No 6 (2014): Mechanics, material science, industrial engineering and management / Mechanika, medžiagų inžinerija, pramonės inžinerija ir vadyba

Published: 2015-03-05

Article

  • Analysis of a mechanical structure of a microscope sensor of atomic force

    Andrius Dzedzickis, Vytautas Bučinskas
    Abstract 926 | PDF Downloads 938 | DOI https://doi.org/10.3846/mla.2014.757
    Page 589-594
    PDF

  • Research on the influence of the properties of intervertebral disc stiffness of the lumbar spine on the displacement of veretbrae

    Artūras Linkel, Julius Griškevičius, Gintaras Jonaitis
    Abstract 900 | PDF Downloads 1138 | DOI https://doi.org/10.3846/mla.2014.758
    Page 595-597
    PDF

  • Investigation into plastic cards

    Neringa Stašelytė, Nikolaj Šešok, Igor Iljin
    Abstract 799 | PDF Downloads 643 | DOI https://doi.org/10.3846/mla.2014.759
    Page 598-602
    PDF

  • Research on the dynamics of the precision angle calibration system

    Artūras Kilikevičius, Vytautas Makarskas, Valdemar Prokopovič
    Abstract 777 | PDF Downloads 597 | DOI https://doi.org/10.3846/mla.2014.760
    Page 603-606
    PDF

  • Research on the hysteresis effect on positioning the system with flexible elements

    Audrius Čereška, Giedrius Augustinavičius
    Abstract 859 | PDF Downloads 659 | DOI https://doi.org/10.3846/mla.2014.761
    Page 607-611
    PDF

  • Research on the influence of cutting rates on macrogeometry deflections of surfaces under processing complex form products made of aluminium aloys

    Ieva Švagždytė, Mindaugas Jurevičius
    Abstract 884 | PDF Downloads 894 | DOI https://doi.org/10.3846/mla.2014.762
    Page 612-616
    PDF

  • Research on cutting crystals soluble in water

    Rimantas Vilkelis, Mindaugas Jurevičius
    Abstract 833 | PDF Downloads 644 | DOI https://doi.org/10.3846/mla.2014.763
    Page 617-620
    PDF

  • Research of plasma spraying of the ZRO2 – Y2O3 electrolyte coatings

    Oleg Devoino, Vasily Okovity
    Abstract 843 | PDF Downloads 661 | DOI https://doi.org/10.3846/mla.2014.764
    Page 621-625
    PDF

  • Research on transverse acetabular fracture fixation using different plate attachment methods

    Gediminas Gaidulis, Julius Griškevičius, Valentinas Uvarovas, Igoris Šatkauskas
    Abstract 891 | PDF Downloads 1641 | DOI https://doi.org/10.3846/mla.2014.765
    Page 626-629
    PDF

  • Investigation into the friction and roughness properties of prints using conventional and UV inks

    Giedrė Giraitytė, Jonas Sidaravičius
    Abstract 805 | PDF Downloads 627 | DOI https://doi.org/10.3846/mla.2014.766
    Page 630-633
    PDF

  • Friction properties of inkjet and flexographic prints on different papers

    Simona Grigaliūnienė, Vaida Burkauskaitė, Aura Kuodė, Jonas Sidaravičius, Vytautas Turla
    Abstract 795 | PDF Downloads 635 | DOI https://doi.org/10.3846/mla.2014.767
    Page 634-639
    PDF

  • Research of technological characteristics of dispersed molding materials

    Vitaliy Kulikov, Svetlana Kvon, Elena Serbakova, Tatyana Kovaleva
    Abstract 781 | PDF Downloads 570 | DOI https://doi.org/10.3846/mla.2014.768
    Page 640-642
    PDF

  • Computer-based measurement kit for welding deformations

    Darius Dačkauskas, Nikolaj Višniakov
    Abstract 824 | PDF Downloads 692 | DOI https://doi.org/10.3846/mla.2014.769
    Page 643-647
    PDF

  • Research of the resistance of contact welding joint of R65 type rail

    Kęstutis Dauskurdis, Vitalijus Rudzinskas
    Abstract 1072 | PDF Downloads 755 | DOI https://doi.org/10.3846/mla.2014.770
    Page 648-653
    PDF

  • Analysis of scaffold materials of implant and tissue regeneration

    Deividas Mizeras, Algirdas Vaclovas Valiulis, Andžela Šešok, Julius Griškevičius
    Abstract 904 | PDF Downloads 1239 | DOI https://doi.org/10.3846/mla.2014.771
    Page 654-660
    PDF

  • Research on laser micro polishing of sls technology sintered iron-based powder surface

    Gerda Vaitkūnaitė, Vladislav Markovič, Olegas Černašėjus
    Abstract 848 | PDF Downloads 652 | DOI https://doi.org/10.3846/mla.2014.772
    Page 661-665
    PDF

  • Research on the plasma spray process applying the finite element method

    Raimonda Lukauskaitė, Jonas Garjonis, Olegas Černašėjus
    Abstract 899 | PDF Downloads 689 | DOI https://doi.org/10.3846/mla.2014.773
    Page 666-671
    PDF

  • Research on the rectilinear motion system of the gantry module

    Neringa Burbaitė, Gintas Viselga, Algirdas Jasinskas
    Abstract 840 | PDF Downloads 552 | DOI https://doi.org/10.3846/mla.2014.774
    Page 672-675
    PDF

  • Piezoelectric systems as an alternative energy source

    Andrius Čeponis, Dalius Mažeika
    Abstract 913 | PDF Downloads 957 | DOI https://doi.org/10.3846/mla.2014.775
    Page 676-681
    PDF

  • The application of spherical harmonics for describing a cube-shape particle

    Urtė Radvilaitė
    Abstract 840 | PDF Downloads 611 | DOI https://doi.org/10.3846/mla.2014.776
    Page 682-685
    PDF