Vol 4 No 6 (2012): Mechanics, material science, industrial engineering and management / Mechanika, medžiagų inžinerija, pramonės inžinerija ir vadyba

Published: 2013-02-04

Article

  • A case study on biomass burning in Vaidotai settlement

    Tomas Ališauskas, Gintas Viselga, Algirdas Jasinskas
    Abstract 578 | PDF Downloads 690 | DOI https://doi.org/10.3846/mla.2012.83
    Page 519-522
    PDF

  • Modelling a compliant-based precise positioning stage

    Giedrius Augustinavičius, Audrius Čereška
    Abstract 540 | PDF Downloads 405 | DOI https://doi.org/10.3846/mla.2012.84
    Page 523-527
    PDF

  • Paper and prints as composite materials

    Simona Markulytė, Jonas Sidaravičius, Vytautas Turla
    Abstract 634 | PDF Downloads 582 | DOI https://doi.org/10.3846/mla.2012.85
    Page 528-532
    PDF

  • Reasearch on personnel management problems in industrial enterprises across Lithuania and the ways to suggest innovative solutions

    Jurgita Meldiuk, Eligijus Toločka
    Abstract 694 | PDF Downloads 1279 | DOI https://doi.org/10.3846/mla.2012.86
    Page 533-536
    PDF

  • Research into the influence of the acoustic field on the efficiency of removing aerosols

    Laura Stukaitė, Ina Tetsman, Vladas Vekteris
    Abstract 546 | PDF Downloads 395 | DOI https://doi.org/10.3846/mla.2012.87
    Page 537-540
    PDF

  • Theoretical questions of applying smart materials for microactuators

    Andrius Klevinskis, Vytautas Bučinskas, Lukas Daujotas
    Abstract 557 | PDF Downloads 470 | DOI https://doi.org/10.3846/mla.2012.88
    Page 541-545
    PDF

  • Research into Ni-Cr-Si-B coating sprayed onto aluminium substrate using the method of plasma spray

    Raimonda Lukauskaitė, Algirdas Vaclovas Valiulis, Olegas Černašėjus, Jelena Škamat
    Abstract 563 | PDF Downloads 398 | DOI https://doi.org/10.3846/mla.2012.89
    Page 546-549
    PDF

  • Preperation for a clean surface

    Aurimas Ralys, Valdemar Prokopovič, Vytautas Striška
    Abstract 800 | PDF Downloads 565 | DOI https://doi.org/10.3846/mla.2012.90
    Page 550-554
    PDF

  • Research on the durability of the splints of lower limbs

    Oleg Ardatov, Andžela Šešok
    Abstract 564 | PDF Downloads 361 | DOI https://doi.org/10.3846/mla.2012.91
    Page 555-558
    PDF

  • Research on vibration isolation systems used in laser and nanotechnologies

    Justinas Kuncė, Mindaugas Jurevičius
    Abstract 565 | PDF Downloads 404 | DOI https://doi.org/10.3846/mla.2012.92
    Page 559-563
    PDF

  • Optimization of grillages using genetic algorithms for integrating MatLab and Fortran environments

    Darius Mačiūnas, Juozas Kauna, Dmitrij Šešok
    Abstract 612 | PDF Downloads 425 | DOI https://doi.org/10.3846/mla.2012.93
    Page 564-568
    PDF

  • Quality analysis of cutting steel using laser

    Vladislav Markovič
    Abstract 641 | PDF Downloads 397 | DOI https://doi.org/10.3846/mla.2012.94
    Page 569-572
    PDF

  • Research on machining prototypes using an industrial robot

    Valdemar Smilgin, Mantas Štrimaitis, Mindaugas Jurevičius
    Abstract 576 | PDF Downloads 408 | DOI https://doi.org/10.3846/mla.2012.95
    Page 573-578
    PDF

  • Influence of cutting parameters on the surface roughness and hole diameter of drilling making parts of alluminium alloy

    Andrius Stasiūnas, Mindaugas Jurevičius
    Abstract 598 | PDF Downloads 548 | DOI https://doi.org/10.3846/mla.2012.96
    Page 579-582
    PDF

  • Investigation into the accuracy of colours reproduced by the ricoh printer

    Andrius Gedvila, Jonas Sidaravičius
    Abstract 567 | PDF Downloads 344 | DOI https://doi.org/10.3846/mla.2012.97
    Page 583-587
    PDF

  • Research on the effectiveness of aerators

    Vytenis Leonavičius
    Abstract 542 | PDF Downloads 445 | DOI https://doi.org/10.3846/mla.2012.98
    Page 588-592
    PDF

  • Research on dynamic parameters and position accuracy of pneumatics muscles

    Edvard Sadovskij, Valdemar Prokopovič, Vadim Mokšin
    Abstract 572 | PDF Downloads 384 | DOI https://doi.org/10.3846/mla.2012.99
    Page 593-598
    PDF

  • Research on the influence of an acoustic field on particle cohesion in liquid

    Ramūnas Vilkišius, Andrius Styra, Vladas Vekteris
    Abstract 580 | PDF Downloads 359 | DOI https://doi.org/10.3846/mla.2012.100
    Page 599-603
    PDF

  • Research on the properties of thermal sprayed Ni-Cr-Si-Fe-B coatings

    Raimonda Lukauskaitė, Donatas Šiurkus, Olegas Černašėjus
    Abstract 592 | PDF Downloads 340 | DOI https://doi.org/10.3846/mla.2012.101
    Page 604-607
    PDF