Vol 5 No 6 (2013): Mechanics, material science, industrial engineering and management / Mechanika, medžiagų inžinerija, pramonės inžinerija ir vadyba

Published: 2013-12-31

Article

  • Mechanical properties of flexographic prints

    Simona Grigaliūnienė, Dora Abazoriūtė, Milda Kulišauskaitė, Asta Ziminskaitė, Jonas Sidaravičius, Vytautas Turla
    Abstract 641 | PDF Downloads 363 | DOI https://doi.org/10.3846/mla.2013.92
    Page 583-586
    PDF

  • Research of upper limb biomechanics of subjects with Parkinson‘s disease and essential tremmor

    Julius Griškevičius, Jurgita Žižienė
    Abstract 615 | PDF Downloads 569 | DOI https://doi.org/10.3846/mla.2013.93
    Page 587-590
    PDF

  • FEM modelling of lumbar vertebra system

    Rimantas Kačianauskas, Oleg Ardatov
    Abstract 589 | PDF Downloads 612 | DOI https://doi.org/10.3846/mla.2013.94
    Page 591-593
    PDF

  • Influence of quality of rolling surfaces of roller bearings on their vibrational behaviour

    Jevgenij Kurec, Vadim Mokšin, Andrius Gedvila
    Abstract 605 | PDF Downloads 583 | DOI https://doi.org/10.3846/mla.2013.95
    Page 594-597
    PDF

  • Statistical analysis of the flexographic printing quality

    Agnė Matulaitienė, Eugenijus Jurkonis
    Abstract 591 | PDF Downloads 408 | DOI https://doi.org/10.3846/mla.2013.96
    Page 598-600
    PDF

  • Expert system to create building design scheme

    Žilvinas Steckevičius, Darius Mačiūnas, Elena Glėbienė, Renata Birbalaitė
    Abstract 574 | PDF Downloads 402 | DOI https://doi.org/10.3846/mla.2013.97
    Page 601-604
    PDF

  • Risk management improvement of engineering projects in woodworking industry

    Simona Bartkutė, Eligijus Toločka
    Abstract 609 | PDF Downloads 444 | DOI https://doi.org/10.3846/mla.2013.98
    Page 605-608
    PDF

  • Biofuels drying process efficiency research

    Osvaldas Šlepikas, Audrius Čereška
    Abstract 574 | PDF Downloads 641 | DOI https://doi.org/10.3846/mla.2013.99
    Page 609-614
    PDF

  • The investigation of the folding quality in the printing house “BALTO“

    Eglė Daujotaitė, Nikolaj Šešok, Igor Iljin
    Abstract 586 | PDF Downloads 507 | DOI https://doi.org/10.3846/mla.2013.100
    Page 615-619
    PDF

  • The research of technological properties of coatings sprayed with electric ARC spray

    Justinas Gargasas, Algirdas Valiulis, Irmantas Gedzevičius, Šarūnas Mikaliūnas
    Abstract 581 | PDF Downloads 328 | DOI https://doi.org/10.3846/mla.2013.101
    Page 620-624
    PDF

  • The research of dynamic characteristics of angle measurement comparator

    Artūras Kilikevičius, Valdemar Prokopovič, Vytautas Makarskas
    Abstract 574 | PDF Downloads 424 | DOI https://doi.org/10.3846/mla.2013.102
    Page 625-628
    PDF

  • Research of broken wire on the rope surface using dynamic method

    Ernestas Šutinys, Vytautas Bučinskas
    Abstract 611 | PDF Downloads 416 | DOI https://doi.org/10.3846/mla.2013.103
    Page 629-632
    PDF

  • Modeling of high precision positioning system

    Giedrius Augustinavičius, Audrius Čereška
    Abstract 542 | PDF Downloads 417 | DOI https://doi.org/10.3846/mla.2013.104
    Page 633-637
    PDF

  • Transverse acetabular fracture fixation methods analysis using FEA

    Gediminas Gaidulis, Julius Griškevičius
    Abstract 665 | PDF Downloads 1147 | DOI https://doi.org/10.3846/mla.2013.105
    Page 638-641
    PDF

  • Research of properties of sprayed coatings on the aluminium alloys

    Raimonda Lukauskaitė, Denis Kovaliov, Olegas Černašėjus
    Abstract 597 | PDF Downloads 423 | DOI https://doi.org/10.3846/mla.2013.106
    Page 642-647
    PDF

  • Research of cutting data for diamond wire cutting of hard materials

    Rimantas Vilkelis, Vadim Mokšin
    Abstract 578 | PDF Downloads 412 | DOI https://doi.org/10.3846/mla.2013.107
    Page 648-650
    PDF

  • Research of preliminary plastic deformation value influence on artificial ageing dynamics

    E. Chumakov, S. Shukbarova, Irmantas Gadzevičius, Justinas Gargasas
    Abstract 566 | PDF Downloads 389 | DOI https://doi.org/10.3846/mla.2013.108
    Page 651-654
    PDF

  • Investigation of solid particles under the action of an acoustic field

    Egidijus Mykolaitis, Andrius Styra, Vladas Vekteris
    Abstract 528 | PDF Downloads 571 | DOI https://doi.org/10.3846/mla.2013.109
    Page 655-658
    PDF

  • Research of seam dimensional dependence on the short-circuit current in MMA welding process

    Mindaugas Rimkus, Ivanas Višniakas, Česlovas Kazakevičius
    Abstract 574 | PDF Downloads 701 | DOI https://doi.org/10.3846/mla.2013.110
    Page 659-663
    PDF

  • The development of information provision for management solutions made in engineering industry companies of Lithuania

    Audrius Jasėnas, Eligijus Toločka, Gintas Viselga
    Abstract 566 | PDF Downloads 632 | DOI https://doi.org/10.3846/mla.2013.111
    Page 664-670
    PDF

  • Theoretical research of magnetorheological shock absorber damping force

    Andrius Klevinskis, Vytautas Bučinskas
    Abstract 573 | PDF Downloads 423 | DOI https://doi.org/10.3846/mla.2013.112
    Page 671-675
    PDF

  • Analysis of laser sintering technology

    Vladislav Markovič, Olegas Černašėjus, Valdemar Prokopovič
    Abstract 585 | PDF Downloads 445 | DOI https://doi.org/10.3846/mla.2013.113
    Page 676-679
    PDF

  • The investigation of mechanical properties of welding quality of R65 type rail

    Mindaugas Rauduvė, Vitalijus Rudzinskas
    Abstract 562 | PDF Downloads 1029 | DOI https://doi.org/10.3846/mla.2013.114
    Page 680-685
    PDF