Impact of nanoparticles and steel fibers on the mechanical properties of concrete beams: an experimental study
DOI: https://doi.org/10.3846/jeelm.2026.27960Abstract
This study examines the combined effects of nanoparticles (SiO₂ and Al₂O₃) and steel fibers on the mechanical and flexural performance of concrete beams with binder contents of 350 and 550 kg/m³. Eight mixtures were tested following IS and RILEM standards. Nanoparticles showed minimal influence on density but affected strength and deformation. SiO₂ increased compressive strength by 16% in the 350 series, while Al₂O₃ improved flexural strength by about 4%. In the 550 series, only slight gains in strength and stiffness were observed, with maximum loads between 233–240 kN and moments of 78.7–81.0 kN·m. Steel fibers (0.5%) enhanced ductility, raising maximum deflection to 31.5 mm compared to 9–14 mm in non-fibered beams. Stiffness ratios (EIII, theo/EIII, exp) ranged from 0.78–1.70, confirming model reliability. Overall, Al₂O₃ improved stiffness, SiO₂ enhanced ductility, and fibers increased post-cracking resistance, demonstrating the potential of combined nanomaterial-fiber reinforcement for improving concrete performance.
Keywords:
nanoparticles, fibers, concrete beams, density, compressive strength, tensile strength, modulus of elasticityHow to Cite
Share
License
Copyright (c) 2026 The Author(s). Published by Vilnius Gediminas Technical University.
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Al-Saidy, A., El-Gamal, S., & Abu Sohail, K. (2023). Strengthening of reinforced concrete (RC) beams using textile reinforced mortars (TRMs). International Journal of Civil Engineering, 21, 2023–2035. https://doi.org/10.1007/s40999-023-00867-9
Bureau of Indian Standards. (1963). Methods of test for aggregates for concrete, Part 4: Mechanical properties (IS Standard No. 2386(Part IV):1963). https://standards.bis.gov.in/website/standard-details?encryptedId=eyJpdiI6InU3TzVqZ200N2JhVldnYkVQb1RwYWc9PSIsInZhbHVlIjoidWZYbVJvMTVOVDJVUjliR3lBcUdKdz09IiwibWFjIjoiOWJlYzRhNjBlMzYxYzI5MzYzNTgzOGMzYmM3MGM1ZjU4YzBlYmU2NzljMmEzNTdjNDJhZTRjYmQ2YjYxMTgxNiIsInRhZyI6IiJ9&utm_source=chatgpt.com
Bureau of Indian Standards. (1999a). Methods of physical tests for hydraulic cement: Part 2, determination of fineness by specific surface by Blaine air permeability method (IS Standard No. 4031(Part 2):1999. https://standards.bis.gov.in/website/standard-details?encryptedId=eyJpdiI6Img4NE0vTXNmMHdjSnBrK0tiZ08ySkE9PSIsInZhbHVlIjoiaFVDcDJTTGloNnBiMG5ZMmtEbmJyZz09IiwibWFjIjoiYWMxYjI5ODc3YTgxZDljNmEwNWMyYTA3MzczOWZjNDY3MjM0NjYwYzgzOGUxZThlZTA2ZDA1MWIzZGZiODk5YSIsInRhZyI6IiJ9
Bureau of Indian Standards. (1999b). Splitting tensile strength of concrete: Method of test (1st rev.) (IS Standard No. 5816:1999). https://standards.bis.gov.in/website/standard-details?encryptedId=eyJpdiI6IlUvbEJVNmJTYU5WaHZJN1oxb0ZLcUE9PSIsInZhbHVlIjoiV1lRQTQxS3JKYVNiK0pQZkVDbFI3dz09IiwibWFjIjoiZmU3ZDJmNzRmYTdiY2YxOGQ1MGE2NDkzNzgxZjQxMzI4NzVhMmZlYWY2OTZjMzdmYmE2MjI3OTdjOGZjNjJiOCIsInRhZyI6IiJ9
Bureau of Indian Standards. (2000). Plain and reinforced concrete: Code of practice (4th rev.). (IS Standard No. 456:2000). https://law.resource.org/pub/in/bis/S03/is.456.2000.pdf
Bureau of Indian Standards. (2015). Ordinary Portland cement: Specification (Sixth revision) (IS Standard No. 269:2015). https://standards.bis.gov.in/website/standard-details?encryptedId=eyJpdiI6Ik1RSnQ3a2xNZ0ZoenRzZksrMkZKOVE9PSIsInZhbHVlIjoiekd4UGdUV0NTMVcrdG5NYmQwcUc5QT09IiwibWFjIjoiZDY0ZDM1YzI0M2U2MzM2YzcxMGJjNWZjMDNhNTY1NGQ0ZGIyODg5MmEwMWM3ZTc5ZGEwYTQwZjllNTUzODI2ZCIsInRhZyI6IiJ9
Bureau of Indian Standards. (2016). Coarse and fine aggregate for concrete: specification (3rd rev.) (IS Standard No. 383:2016). https://standards.bis.gov.in/website/standard-details?encryptedId=eyJpdiI6IjlpL0JhSXcrcm5sek1KVFZNZjY1TWc9PSIsInZhbHVlIjoiZWxMOFFqaC90RitLOTFtVnlybU1GZz09IiwibWFjIjoiNzQxMDlmY2QzMjliYTUxYTFlNWU3ODViZGJlYzBmYjJhYTE2YTdiMDE5ZGZkZjE5NDA0Y2RmMTU2MTY5YjdhZSIsInRhZyI6IiJ9
Bureau of Indian Standards. (2018). Fresh concrete: Methods of sampling, testing and analysis, Part 2: determination of consistency of fresh concrete (1st rev.) (IS Standard No. 1199(Part 2):2018). https://standards.bis.gov.in/website/standard-details?encryptedId=eyJpdiI6ImxpbXFCSDR4V0duMy9EMFRjQll4c2c9PSIsInZhbHVlIjoib0tYSHdqSWIvUTIwUVI2cUpPaGN2Zz09IiwibWFjIjoiZDllOTEyNzAzYjgxNzk2MDg5ZWM1MGM3Yzc5NjBhODJkMGUzOTA0NWQ0ZTMzNDEwMjNlOGM2ZWVjMmM1ODVlNSIsInRhZyI6IiJ9
Bureau of Indian Standards. (2021). Hardened concrete: Methods of test, Part 1: Testing of strength of hardened concrete, Section 1: Compressive, flexural and split tensile strength (IS Standard No. 516(Part 1/Section 1):2021). https://archive.org/details/gov.in.is.516.1.1.2021
Chen, Y., Waheed, M. S., Iqbal, S., Rizwan, M., & Room, S. (2024). Durability properties of macro-polypropylene fiber-reinforced self-compacting concrete. Materials, 17(2), Article 284. https://doi.org/10.3390/ma17020284
Jha, A. K., Parihar, R. S., Lodhi, V., Misra, R., Kumar, B., & Udeniya, A. (2024). Effect of FLYASH and GGBS on the mechanical properties of green concrete. European Journal of Theoretical and Applied Sciences, 2(4), 414–429. https://doi.org/10.59324/ejtas.2024.2(4).34
Jin, X., Haider, M. Z., Cui, Y., Jang, J. G., Kim, Y. J., Fang, G., & Hu, J. W. (2023). Development of nanomodified self-healing mortar and a U-Net model based on semantic segmentation for crack detection and evaluation. Construction and Building Materials, 365, Article 129985. https://doi.org/10.1016/j.conbuildmat.2022.129985
Kumar, P., Gogineni, A., & Upadhyay, R. (2024). Mechanical performance of fiber-reinforced concrete incorporating rice husk ash and recycled aggregates. Journal of Building Pathology and Rehabilitation, 9, Article 144. https://doi.org/10.1007/s41024-024-00500-9.
Li, X., Gu, X., Xia, X., Madenci, E., Chen, A., & Zhang, Q. (2024). Peridynamic simulation of micro-internal damage and macro-mechanical properties of cement paste under freeze-thaw cycles. Journal of Building Engineering, 93, Article 109759. https://doi.org/10.1016/j.jobe.2024.109759
Liu, Z., Qi, X., Yu, Z., Ke, J., Gao, X., & Shui, Z. (2024). Development and properties of cost-effective self-sensing ultra-high-performance fiber-reinforced concrete (UHPFRC) incorporating steel slags. Construction and Building Materials, 449, Article 138502. https://doi.org/10.1016/j.conbuildmat.2024.138502
Prasittisopin, L., Nganglumpoon, R., Thongchom, C., & Panpranot, J. (2025). Systematic review and thematic analysis of the utilization of carbon quantum dots (CQDs) in construction materials. Journal of Materials Science: Materials in Engineering, 20, Article 53. https://doi.org/10.1186/s40712-025-00258-z
Sharma, R., Jang, J. G., & Bansal, P. P. (2022). A comprehensive review on effects of mineral admixtures and fibers on engineering properties of ultra-high-performance concrete. Journal of Building Engineering, 45, Article 103314. https://doi.org/10.1016/j.jobe.2021.103314
Singh, S., Pahsha, E., & Kalla, P. (2023). Investigations on GUJCON-CRF Nylon 6 fiber-based cement concrete for pavement. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.03.026
Wang, X., & Cong, R. (2024). Investigation of mechanical properties of high-performance concrete via optimized neural network approaches. Journal of Engineering and Applied Science, 71, Article 73. https://doi.org/10.1186/s44147-024-00406-w
Win, T. T., Prasittisopin, L., Nganglumpoon, R., Pinthong, P., Watmanee, S., Tolek, W., & Panpranot, J. (2024a). Chemo-physical mechanisms of high-strength cement composites with suprastructure of graphene quantum dots. Cleaner Materials, 11, Article 100229. https://doi.org/10.1016/j.clema.2024.100229
Win, T. T., Raengthon, N., & Prasittisopin, L. (2024b). Advanced cement composites: Investigating the role of graphene quantum dots in improving thermal and mechanical performance. Journal of Building Engineering, 96, Article 110556. https://doi.org/10.1016/j.jobe.2024.110556
Yadav, R. R., Singh, P., Bishnoi, S., & Jain, A. K. (2023). Analyzing the mechanical properties of bacterial concrete. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.07.084
Zhang, Q., Zhang, X., Wang, L., & Zhang, S. (2025). Synthesis, characterization, and cementitious activity of magnesium silicate hydrate and calcium silicate hydrate from coal gangue. Molecules, 30(8), Article 1725. https://doi.org/10.3390/molecules30081725
View article in other formats
CrossMark check
Published
Issue
Section
Copyright
Copyright (c) 2026 The Author(s). Published by Vilnius Gediminas Technical University.
License
This work is licensed under a Creative Commons Attribution 4.0 International License.