Insights into the entire building life cycle assessment (LCA): existing trends, challenges and prospective framework
DOI: https://doi.org/10.3846/jeelm.2026.27214Abstract
Building sustainability assessment increasingly demands life cycle coverage that captures environmental burdens and trade-offs beyond operational energy, including embodied impacts and end of life (EoL) outcomes under circular economy (CE) pathways. This review synthesises recent research on how Life Cycle Assessment (LCA) supports the formation of Building Sustainability Index (BSI), with particular attention to the stage-dependent distribution of impacts and the growing significance of embodied and EoL stages in low-energy buildings, methodological sensitivities associated with system boundaries, datasets, and scenario definitions, and the implications of EoL modelling and allocation choices for CE-oriented sustainability claims. The paper further examines how life cycle thinking is operationalised within major certification schemes (LEED, BREEAM and DGNB) and discusses comparability limitations when certification outcomes are interpreted as sustainability indices. By consolidating methodological evidence and practice-oriented pathways, the paper clarifies requirements for robust, transparent and comparable Life Cycle Assessment (LCA) informed sustainability indices aligned with whole-life and circularity objectives.
Keywords:
Life Cycle Assessment (LCA), Building Sustainability Index (BSI), sustainability certification systems, Artificial Intelligence (AI), circular economy, environmental burdensHow to Cite
Share
License
Copyright (c) 2026 The Author(s). Published by Vilnius Gediminas Technical University.
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Azhar, S., Carlton, W., Olsen, D., & Ahmad, I. (2011). Building information modeling for sustainable design and LEED® rating analysis. Automation in Construction, 20(2), 217–224. https://doi.org/10.1016/j.autcon.2010.09.019
Bernardi, E., Carlucci, S., Cornaro, C., & Bohne, R. (2017). An analysis of the most adopted rating systems for assessing the environmental impact of buildings. Sustainability, 9(7), Article 1226. https://doi.org/10.3390/su9071226
Binz, S., & Jäger, J. (2024). Planning and building within planetary boundaries. From the singular target of climate neutrality towards a holistic climate and resource-saving building design – a case study. IOP Conference Series: Earth and Environmental Science, 1363(1), Article 012001. https://doi.org/10.1088/1755-1315/1363/1/012001
Blomsma, F., & Brennan, G. (2017). The emergence of circular economy: A new framing around prolonging resource productivity. Journal of Industrial Ecology, 21(3), 603–614. https://doi.org/10.1111/jiec.12603
Braganca, L., Mateus, R., & Koukkari, H. (2010). Building sustainability assessment. Sustainability, 2(7), 2010–2023. https://doi.org/10.3390/su2072010
Cabeza, L., Boquera, L., Chàfer, M., & Vérez, D. (2021). Embodied energy and embodied carbon of structural building materials: Worldwide progress and barriers through literature map analysis. Energy and Buildings, 231, Article 110612. https://doi.org/10.1016/j.enbuild.2020.110612
Carvalho, J. P., Alecrim, I., Braganca, L., & Mateus, R. (2020). Integrating BIM-based LCA and building sustainability assessment. Sustainability, 12(18), Article 7468. https://doi.org/10.3390/su12187468
Carvalho, J., Villaschi, F., & Braganca, L. (2021). Assessing life cycle environmental and economic impacts of building construction solutions with BIM. Sustainability, 13(16), Article 8914. https://doi.org/10.3390/su13168914
Chandrasekaran, V., & Dvarionienė, J. (2022). A review of the environmental impact of buildings with an emphasis on performance assessment tools and their incorporation of LCA. Advances in Civil Engineering, 2022, Article 9947920. https://doi.org/10.1155/2022/9947920
Chen, Y., Wang, X., Liu, Z., Cui, J., Osmani, M., & Demian, P. (2023). Exploring building information modeling (BIM) and Internet of Things (IoT) integration for sustainable building. Buildings, 13(2), Article 288. https://doi.org/10.3390/buildings13020288
Cordero, A., Melgar, S., & Andújar, J. (2019). Green building rating systems and the new framework Level(s): A critical review of sustainability certification within Europe. Energies, 13(1), Article 66. https://doi.org/10.3390/en13010066
Dams, B., Maskell, D., Shea, A., Allen, S., Driesser, M., Kretschmann, T., Walker, P., & Emmitt, S. (2021). A circular construction evaluation framework to promote designing for disassembly and adaptability. Journal of Cleaner Production, 316, Article 128122. https://doi.org/10.1016/j.jclepro.2021.128122
Dsilva, J., Zarmukhambetova, S., & Locke, J. (2023). Assessment of building materials in the construction sector: A case study using life cycle assessment approach to achieve the circular economy. Heliyon, 9(10), Article e20404. https://doi.org/10.1016/j.heliyon.2023.e20404
Eberhardt, L., Stijn, A., Rasmussen, F., Birkved, M., & Birgisdóttir, H. (2020). Development of a life cycle assessment allocation approach for circular economy in the built environment. Sustainability, 12(22), Article 9579. https://doi.org/10.3390/su12229579
Egemose, C., Bastien, D., Fretté, X., Birkved, M., & Sohn, J. (2022). Human toxicological impacts in life cycle assessment of circular economy of the built environment: A case study of Denmark. Buildings, 12(2), Article 130. https://doi.org/10.3390/buildings12020130
Eleftheriadis, S., Mumovic, D., & Greening, P. (2017). Life cycle energy efficiency in building structures: A review of current developments and future outlooks based on BIM capabilities. Renewable and Sustainable Energy Reviews, 67, 811–825. https://doi.org/10.1016/j.rser.2016.09.028
European Committee for Standardization. (2022). EN 15978:2011+A2:2022 Sustainability of construction works—Assessment of environmental performance of buildings—Calculation method. CEN.
Finkbeiner, M., Schau, E. M., Lehmann, A., & Traverso, M. (2010). Towards life cycle sustainability assessment. Sustainability, 2(10), 3309–3322. https://doi.org/10.3390/su2103309
Finnveden, G., Hauschild, M., Ekvall, T., Guinée, J., Heijungs, R., Hellweg, S., & Suh, S. (2009). Recent developments in life cycle assessment. Journal of Environmental Management, 91(1), 1–21. https://doi.org/10.1016/j.jenvman.2009.06.018
Gardner, H., Hasik, V., Banawi, A., Olinzock, M., & Bilec, M. (2020). Whole building life cycle assessment of a living building. Journal of Architectural Engineering, 26(4), Article 04020032. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000436
Gomes, R., Silvestre, J., & Brito, J. (2019). Environmental life cycle assessment of thermal insulation tiles for flat roofs. Materials, 12(16), Article 2595. https://doi.org/10.3390/ma12162595
Gulck, L., Wastiels, L., & Steeman, M. (2022). How to evaluate circularity through an LCA study based on the standards EN 15804 and EN 15978. The International Journal of Life Cycle Assessment, 27(12), 1249–1266. https://doi.org/10.1007/s11367-022-02099-w
Häfliger, I., John, V., Passer, A., Lasvaux, S., Hoxha, E., Saade, M., & Habert, G. (2017). Buildings environmental impacts’ sensitivity related to LCA modelling choices of construction materials. Journal of Cleaner Production, 156, 805–816. https://doi.org/10.1016/j.jclepro.2017.04.052
Hollberg, A., & Ruth, J. (2016). LCA in architectural design—a parametric approach. The International Journal of Life Cycle Assessment, 21(7), 943–960. https://doi.org/10.1007/s11367-016-1065-1
Hong, T., Wang, Z., Luo, X., & Zhang, W. (2020). State-of-the-art on research and applications of machine learning in the building life cycle. Energy and Buildings, 212, Article 109831. https://doi.org/10.1016/j.enbuild.2020.109831
International Energy Agency. (2019). Global status report for buildings and construction 2019: Towards a zero-emissions, efficient and resilient buildings and construction sector. https://www.iea.org/reports/global-status-report-for-buildings-and-construction-2019
Kakkos, E., & Hischier, R. (2022). Paving the way towards circularity in the building sector: Empa’s Sprint Unit as a beacon of swift and circular construction. IOP Conference Series: Earth and Environmental Science, 1078(1), Article 012009. https://doi.org/10.1088/1755-1315/1078/1/012009
Khasreen, M., Banfill, P., & Menzies, G. (2009). Life-cycle assessment and the environmental impact of buildings: A review. Sustainability, 1(3), 674–701. https://doi.org/10.3390/su1030674
Kim, R., Lim, M., Roh, S., & Park, W. (2021). Analysis of the characteristics of environmental impacts according to the cut-off criteria applicable to the streamlined life cycle assessment (S-LCA) of apartment buildings in South Korea. Sustainability, 13(5), Article 2898. https://doi.org/10.3390/su13052898
Kofoworola, O. F., & Gheewala, S. H. (2008). Environmental life cycle assessment of a commercial office building in Thailand. The International Journal of Life Cycle Assessment, 13(6), 498–511. https://doi.org/10.1007/s11367-008-0012-1
Larsen, V. G., Tollin, N., Sattrup, P. A., Birkved, M., & Holmboe, T. (2022). What are the challenges in assessing circular economy for the built environment? A literature review on integrating LCA, LCC and S-LCA in life cycle sustainability assessment, LCSA. Journal of Building Engineering, 50, Article 104203. https://doi.org/10.1016/j.jobe.2022.104203
Lasvaux, S., Habert, G., Peuportier, B., & Chevalier, J. (2015). Comparison of generic and product-specific life cycle assessment databases: Application to construction materials used in building LCA studies. The International Journal of Life Cycle Assessment, 20(11), 1473–1490. https://doi.org/10.1007/s11367-015-0938-z
Lee, S., Tae, S., Roh, S., & Kim, T. (2015). Green template for life cycle assessment of buildings based on building information modeling: Focus on embodied environmental impact. Sustainability, 7(12), 16498–16512. https://doi.org/10.3390/su71215830
Lei, B., Yang, W., Yan, Y., Tang, Z., & Dong, W. (2023). Carbon emission reduction evaluation of end-of-life buildings based on multiple recycling strategies. Sustainability, 15(22), Article 15711. https://doi.org/10.3390/su152215711
Li, Q., Wei, Y., Kohler, N., Yang, L., Li, J., Sun, Z., & Ren, J. (2023). A BIM–LCA approach for the whole design process of green buildings in the Chinese context. Sustainability, 15(4), Article 3629. https://doi.org/10.3390/su15043629
Liu, X. (2026). Health sensitive decision-making for integrating artificial intelligence and landscape architecture in urban cities. Journal of Environmental Engineering and Landscape Management, 34(1), 57–70. https://doi.org/10.3846/jeelm.2026.25254
Liu, Y., Lei, Y., Johnston, D. M., Jiang, M., Dong, N., Xie, D., Ma, Z., Zhang, X., & Guo, N. (2023). Quantitative study on GHG emissions and the GWP influence of cemetery green space maintenance based on LCA. Journal of Environmental Engineering and Landscape Management, 31(1), 67–81. https://doi.org/10.3846/jeelm.2023.18488
Meex, E., Hollberg, A., Knapen, E., Hildebrand, L., & Verbeeck, G. (2018). Requirements for applying LCA-based environmental impact assessment tools in the early stages of building design. Building and Environment, 133, 228–236. https://doi.org/10.1016/j.buildenv.2018.02.016
Mesa, J. A., Fúquene-Retamoso, C. E., & Ramirez, A. M. (2021). Life cycle assessment on construction and demolition waste: A systematic literature review. Sustainability, 13(14), Article 7676. https://doi.org/10.3390/su13147676
Mirzaie, S., Thuring, M., & Allacker, K. (2020). End-of-life modelling of buildings to support more informed decisions towards achieving circular economy targets. The International Journal of Life Cycle Assessment, 25(11), 2122–2139. https://doi.org/10.1007/s11367-020-01807-8
Onat, N., Kücükvar, M., Halog, A., & Cloutier, S. (2017). Systems thinking for life cycle sustainability assessment: A review of recent developments, applications, and future perspectives. Sustainability, 9(5), Article 706. https://doi.org/10.3390/su9050706
Pomponi, F., & Moncaster, A. (2017). Circular economy for the built environment: A research framework. Journal of Cleaner Production, 143, 710–718. https://doi.org/10.1016/j.jclepro.2016.12.055
Pomponi, F., & Moncaster, A. (2016). Embodied carbon mitigation and reduction in the built environment – what does the evidence say? Journal of Environmental Management, 181, 687–700. https://doi.org/10.1016/j.jenvman.2016.08.036
Rosario, P. D., Palumbo, E., & Traverso, M. (2021). Environmental product declarations as data source for the environmental assessment of buildings in the context of level(s) and DGNB: How feasible is their adoption? Sustainability, 13(11), Article 6143. https://doi.org/10.3390/su13116143
Schneider-Marin, P., Winkelkotte, A., & Lang, W. (2022). Integrating environmental and economic perspectives in building design. Sustainability, 14(8), Article 4637. https://doi.org/10.3390/su14084637
Soust-Verdaguer, B., Llatas, C., & Martínez, A. (2017). Critical review of BIM-based LCA method to buildings. Energy and Buildings, 136, 110–120. https://doi.org/10.1016/j.enbuild.2016.12.009
Strzelecki, S., Zambeletti, F. S., & Sanchez, B. (2025). Life Cycle Assessment (LCA) perspective for the decision-making methodology involved in adaptive reuse of buildings. IOP Conference Series: Earth and Environmental Science, 1554(1), Article 012004. https://doi.org/10.1088/1755-1315/1554/1/012004
Trubina, N., Lupíšek, A., Pešta, J., & Vlasatá, B. (2024). Demountable structures: Evaluation of a circular design approach through life cycle assessment. IOP Conference Series: Earth and Environmental Science, 1402(1), Article 012040. https://doi.org/10.1088/1755-1315/1402/1/012040
Walker, S., Coleman, N., Hodgson, P., Collins, N., & Brimacombe, L. (2018). Evaluating the environmental dimension of material efficiency strategies relating to the circular economy. Sustainability, 10(3), Article 666. https://doi.org/10.3390/su10030666
Wolf, C., Hoxha, E., & Fivet, C. (2020). Comparison of environmental assessment methods when reusing building components: A case study. Sustainable Cities and Society, 61, Article 102322. https://doi.org/10.1016/j.scs.2020.102322
Wong, J., & Fan, Q. (2013). Building information modelling (BIM) for sustainable building design. Facilities, 31(3/4), 138–157. https://doi.org/10.1108/02632771311299412
Xue, K., Hossain, M. U., Liu, M., Ma, M., Zhang, Y., Hu, M., & Cao, G. (2021). BIM integrated LCA for promoting circular economy towards sustainable construction: An analytical review. Sustainability, 13(3), Article 1310. https://doi.org/10.3390/su13031310
Yavan, F., Maalek, R., & Toğan, V. (2024). Structural optimization of trusses in building information modeling (BIM) projects using visual programming, evolutionary algorithms, and life cycle assessment (LCA) tools. Buildings, 14(6), Article 1532. https://doi.org/10.3390/buildings14061532
Ylmén, P., Peñaloza, D., & Mjörnell, K. (2019). Life cycle assessment of an office building based on site-specific data. Energies, 12(13), Article 2588. https://doi.org/10.3390/en12132588
Zabalza, I., Scarpellini, S., Aranda-Usón, A., Llera-Sastresa, E., & Jáñez, A. (2013). Use of LCA as a tool for building ecodesign: A case study of a low energy building in Spain. Energies, 6(8), 3901–3921. https://doi.org/10.3390/en6083901
View article in other formats
CrossMark check
Published
Issue
Section
Copyright
Copyright (c) 2026 The Author(s). Published by Vilnius Gediminas Technical University.
License
This work is licensed under a Creative Commons Attribution 4.0 International License.