Methodology for assessing and controlling the risk grade of structural columns threatened by blast incident
DOI: https://doi.org/10.3846/jcem.2025.24093Abstract
Columns are important structural components and are threatened by local conflicts and explosion accidents. This paper presents a fuzzy-based risk assessment framework to evaluate the potential blast disasters associated with structural columns. The framework establishes an indicator system and incorporates risk functions and a fuzzy transformation system for blast risk assessment. The priority weights of critical attributes are determined using a fuzzy analytic hierarchy process (FAHP) approach, and the risk factor (RF) is calculated via the aggregation of foundational fuzzy evaluations. The feasibility and applicability of the framework are demonstrated through the risk level assessment of five example columns. The framework’s rationality is further validated by comparing the onrisk grades of identical cases, as assessed by the proposed framework and alternative methods. The study results indicated that the framework can effectively discern the risk range of desired grade rankings and ascertain the risk grade. By integrating the obtained attribute ranking and hierarchical structure, the framework facilitates the identification of potent strategies for controlling blast risk. The resulting risk-grade findings serve as a foundation for the identification of priority protection and anti-explosion design of structural columns.
Keywords:
blast disaster, multi-criteria risk assessment, fuzzy theory, structural columnHow to Cite
Share
License
Copyright (c) 2025 The Author(s). Published by Vilnius Gediminas Technical University.
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Abdollahzadeh, G., & Faghihmaleki, H. (2017). Probabilistic two-hazard risk assessment of near-fault and far-fault earthquakes in a structure subjected to earthquake-induced gas explosion. Journal of Building Engineering, 13, 298–304. https://doi.org/10.1016/j.jobe.2017.09.002
Ahmed, F., & Kilic, K. (2019). Fuzzy analytic hierarchy process: A performance analysis of various algorithms. Fuzzy Sets and Systems, 362, 110–128. https://doi.org/10.1016/j.fss.2018.08.009
Al-Thairy, H. (2016). A modified single degree of freedom method for the analysis of building steel columns subjected to explosion induced blast load. International Journal of Impact Engineering, 94, 120–133. https://doi.org/10.1016/j.ijimpeng.2016.04.007
Al-Thairy, H. (2018). Behaviour and failure of steel columns subjected to blast loads: Numerical study and analytical approach. Advances in Materials Science and Engineering, 2018, Article 1591384. https://doi.org/10.1155/2018/1591384
Andrić, J. M., & Lu, D. (2016). Risk assessment of bridges under multiple hazards in operation period. Safety Science, 83, 80–92. https://doi.org/10.1016/j.ssci.2015.11.001
Attary, N., Unnikrishnan, V. U., van de Lindt, J. W., Daniel, T. C., & Barbosa, A. R. (2017). Performance-based tsunami engineering methodology for risk assessment of structures. Engineering Structures, 141, 676–686. https://doi.org/10.1016/j.engstruct.2017.03.071
Cao, X., & Lam, J. S. L. (2019). A fast reaction-based port vulnerability assessment: Case of Tianjin Port explosion. Transportation Research Part A: Policy and Practice, 128, 11–33. https://doi.org/10.1016/j.tra.2019.05.019
Chan, F. T. S., & Kumar, N. (2007). Global supplier development considering risk factors using fuzzy extended AHP-based approach. Omega, 35(4), 417–431. https://doi.org/10.1016/j.omega.2005.08.004
Chen, S. (2001). Fuzzy group decision making for evaluating the rate of aggregative risk in software development. Fuzzy Sets and Systems, 118(1), 75–88. https://doi.org/10.1016/S0165-0114(99)00103-7
Chen, D. (2021). Risk assessment of government debt based on machine learning algorithm. Complexity, 2021, Article 3686692. https://doi.org/10.1155/2021/3686692
Cho, J., Jang, S., & Song, J. (2023). Onsite measurement and dilution-based infection risk assessment for a new mobile negative pressure isolation room (MNPIR) as a solution to minimize cross-infection. Sustainable Cities and Society, 95, Article 104583. https://doi.org/10.1016/j.scs.2023.104583
Clough, L. G., & Clubley, S. K. (2019). Steel column response to thermal and long duration blast loads inside an air blast tunnel. Structure and Infrastructure Engineering, 15(11), 1510–1528. https://doi.org/10.1080/15732479.2019.1635627
Davidson, V. J., Ryks, J., & Fazil, A. (2006). Fuzzy risk assessment tool for microbial hazards in food systems. Fuzzy Sets and Systems, 157(9), 1201–1210. https://doi.org/10.1016/j.fss.2005.12.018
Ding, Y., Fang, L., Li, Z., & Shi, Y. (2013). Research on categorized explosion protection criterion of anti-terrorism building structures. Journal of Building Structures, 34(4), 57–64.
Ezcurra, M. D. (2024). Exploring the effects of weighting against homoplasy in genealogies of palaeontological phylogenetic matrices. Cladistics, 40(3), 242–281. https://doi.org/10.1111/cla.12581
Faber, M. H., & Stewart, M. G. (2003). Risk assessment for civil engineering facilities: critical overview and discussion. Reliability Engineering and System Safety, 80, 173–184. https://doi.org/10.1016/S0951-8320(03)00027-9
Gündel, M., Hoffmeister, B., Feldmann, M., & Hauke, B. (2012). Design of high rise steel buildings against terrorist attacks. Computer-Aided Civil & Infrastructure Engineering, 27(5), 369–383. https://doi.org/10.1111/j.1467-8667.2011.00749.x
Hadjioannou, M., Donahue, S., Williamson, E. B., & Engelhardt, M. D. (2018). Large-scale experimental tests of composite steel floor systems subjected to column loss scenarios. Journal of Structural Engineering, 144(2), Article 04017184. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001929
Hou, X., Cao, S., Rong, Q., & Zheng, W. (2018). A P-I diagram approach for predicting failure modes of RPC one-way slabs subjected to blast loading. International Journal of Impact Engineering, 120, 171–184. https://doi.org/10.1016/j.ijimpeng.2018.06.006
Ji, Y., Huang, G. H., & Sun, W. (2015). Risk assessment of hydropower stations through an integrated fuzzy entropy-weight multiple criteria decision making method: A case study of the Xiangxi River. Expert Systems with Applications, 42, 5380–5389. http://doi.org/10.1016/j.eswa.2014.12.026
Jonkman, S. N., van Gelder, P. H. A. J. M., & Vrijling, J. K. (2003). An overview of quantitative risk measures for loss of life and economic damage. Journal of Hazardous Materials, 99(1), 1–30. https://doi.org/10.1016/S0304-3894(02)00283-2
Kahraman, C., Cebeci, U., & Ruan, D. (2004). Multi-attribute comparison of catering service companies using fuzzy AHP: The case of Turkey. International Journal of Production Economics, 87(2), 171–184. https://doi.org/10.1016/S0925-5273(03)00099-9
Karimi, I., & Hüllermeier, E. (2007). Risk assessment system of natural hazards: A new approach based on fuzzy probability. Fuzzy Sets and Systems, 158(9), 987–999. https://doi.org/10.1016/j.fss.2006.12.013
Kodur, V. K. R., & Naser, M. Z. (2013). Importance factor for design of bridges against fire hazard. Engineering Structures, 54, 207–220. https://doi.org/10.1016/j.engstruct.2013.03.048
Kong, H., & Zhang, N. (2024). Risk assessment of water inrush accident during tunnel construction based on FAHP-I-TOPSIS. Journal of Cleaner Production, 449, Article 141744. https://doi.org/10.1016/j.jclepro.2024.141744
Koohathongsumrit, N., & Meethom, W. (2024). Risk analysis in underground tunnel construction with tunnel boring machines using the Best–Worst method and data envelopment analysis. Heliyon, 10(1), Article e23486. https://doi.org/10.1016/j.heliyon.2023.e23486
Lee, A. H. I., Kang, H. Y., Hsu, C. F., & Hung, H. C. (2009). A green supplier selection model for high-tech industry. Expert Systems with Applications, 36(4), 7917–7927. https://doi.org/10.1016/j.eswa.2008.11.052
Li, L., Shi, Z., Yin, W., Zhu, D., Ng, S., Cai, C., & Lei, A. (2009). A fuzzy analytic hierarchy process (FAHP) approach to eco-environmental vulnerability assessment for the Danjiangkou reservoir area, China. Ecological Modelling, 220(23), 3439–3447. https://doi.org/10.1016/j.ecolmodel.2009.09.005
Li, J., Zhang, J., & Suo, W. (2019). Risk assessment in cross-border transport infrastructure projects: A fuzzy hybrid method considering dual interdependent effects. Information Sciences, 488, 140–157. https://doi.org/10.1016/j.ins.2019.03.028
Li, C., Qiao, Z., Hao, M., Zhang, H., & Li, G. (2022). Effect of ignition energy on environmental parameters of gas explosion in semiclosed pipeline. ACS Omega, 7(12), 10394–10405. https://doi.org/10.1021/acsomega.1c07097
Lyu, H., Shen, S., Zhou, A., & Zhou, W. (2019). Flood risk assessment of metro systems in a subsiding environment using the interval FAHP-FCA approach. Sustainable Cities and Society, 50, Article 101682. https://doi.org/10.1016/j.scs.2019.101682
Mackie, K. R., Wong, J. M., & Stojadinovic, B. (2009). Post-earthquake bridge repair cost and repair time estimation methodology. Earthquake Engineering & Structural Dynamics, 39(3), 281–301. https://doi.org/10.1002/eqe.942
Miao, L., Jin, L., Li, D., Du, X., & Zhang, B. (2022). Effect of shear-span ratio and vertical reinforcement ratio on the failure of geometrical-similar RC shear walls. Engineering Failure Analysis, 139, Article 106407. https://doi.org/10.1016/j.engfailanal.2022.106407
Mottaghi-Kashtiban, M., Khoei, A., & Hadidi, K. (2008). Optimization of rational-powered membership functions using extended Kalman filter. Fuzzy Sets and Systems, 159(23), 3232–3244. https://doi.org/10.1016/j.fss.2008.06.021
Mutlu, M., & Sari, M. (2022). Risk-based classification of underground coal mine basins in Turkey using the analytic hierarchy process (AHP). Arabian Journal of Geosciences, 15, Article 752. https://doi.org/10.1007/s12517-022-10005-9
Nieto-Morote, A., & Ruz-Vila, F. (2011). A fuzzy approach to construction project risk assessment. International Journal of Project Management, 29(2), 220–231. https://doi.org/10.1016/j.ijproman.2010.02.002
Ouyang, M. (2014). Review on modeling and simulation of interdependent critical infrastructure systems. Reliability Engineering & System Safety, 121, 43–60. https://doi.org/10.1016/j.ress.2013.06.040
Pan, R., Cui, B., Zhang, X., Wang, Y., & Zheng, L. (2023). Study on pressure wave response and overpressure attenuation law of explosion-proof doors. Process Safety and Environmental Protection, 169, 706–717. https://doi.org/10.1016/j.psep.2022.11.032
Pérez-Fernández, R., Alonso, P., Díaz, I., & Montes, S. (2015). Multi-factorial risk assessment: An approach based on fuzzy preference relations. Fuzzy Sets and Systems, 278, 67–80. https://doi.org/10.1016/j.fss.2014.10.012
Qi, S., Du, Y., Zhang, P., Li, G., Zhou, Y., & Wang, B. (2017). Effects of concentration, temperature, humidity, and nitrogen inert dilution on the gasoline vapor explosion. Journal of Hazardous Materials, 323, 593–601. https://doi.org/10.1016/j.jhazmat.2016.06.040
Qie, Z., & Rong, L. (2017). An integrated relative risk assessment model for urban disaster loss in view of disaster system theory. Natural Hazards, 88, 165–190. https://doi.org/10.1007/s11069-017-2861-z
Qin, H., & Stewart, M. G. (2020). Wind and rain losses for metal-roofed contemporary houses subjected to non-cyclonic windstorms. Structural Safety, 86, Article 101979. https://doi.org/10.1016/j.strusafe.2020.101979
Ravankhah, M., Schmidt, M., & Will, T. (2021). An indicator-based risk assessment framework for World Heritage sites in seismic zones: The case of “Bam and its Cultural Landscape” in Iran. International Journal of Disaster Risk Reduction, 63, Article 102405. https://doi.org/10.1016/j.ijdrr.2021.102405
Shaw, K., Shankar, R., Yadav, S. S., & Thakur, L. S. (2012). Supplier selection using fuzzy AHP and fuzzy multi-objective linear programming for developing low carbon supply chain. Expert Systems with Applications, 39, 8182–8192. https://doi.org/10.1016/j.eswa.2012.01.149
Shi, Y., & Stewart, M. G. (2015). Spatial reliability analysis of explosive blast load damage to reinforced concrete columns. Structural Safety, 53, 13–25. https://doi.org/10.1016/j.strusafe.2014.07.003
Shi, Y., Li, Z., & Hao, H. (2010). A new method for progressive collapse analysis of RC frames under blast loading. Engineering Structures, 32(6), 1691–1703. https://doi.org/10.1016/j.engstruct.2010.02.017
Stawczyk, J. (2003). Experimental evaluation of LPG tank explosion hazards. Journal of Hazardous Materials, 96(2–3), 189–200. https://doi.org/10.1016/S0304-3894(02)00198-X
Stewart, M. G., & Netherton, M. D. (2008). Security risks and probabilistic risk assessment of glazing subject to explosive blast loading. Reliability Engineering & System Safety, 93(4), 6278–638. https://doi.org/10.1016/j.ress.2007.03.007
Sun, P., Hou, X., Zheng, W., Qin, H., & Shao, G. (2021). Risk assessment for bridge structures against blast hazard via a fuzzy-based framework. Engineering Structures, 232, Article 111874. https://doi.org/10.1016/j.engstruct.2021.111874
Sun, P., Hou, X., Zheng, W., & Cao, S. (2022). Strengthening of conventional columns through RPC sandwich tube against blast loading. Structures, 45, 1850–1863. https://doi.org/10.1016/j.istruc.2022.09.115
Tak, H. Y., Suh, W., & Lee, Y. J. (2019). System-level seismic risk assessment of bridge transportation networks employing probabilistic seismic hazard analysis. Mathematical Problems in Engineering, 2019, Article 6503616. https://doi.org/10.1155/2019/6503616
Takaki, Y., & Gotoh, K. (2020). Approximate weight functions of stress intensity factor for a wide range shapes of surface and an embedded elliptical crack. Marine Structures, 70, Article 102696. https://doi.org/10.1016/j.marstruc.2019.102696
Tang, Y., Dai, G., Zhou, Y., Huang, Y., & Zhou, D. (2023). Conflicting evidence fusion using a correlation coefficient-based approach in complex network. Chaos, Solitons & Fractals, 176, Article 114087. https://doi.org/10.1016/j.chaos.2023.114087
Tang, Y., Sun, Z., Zhou, D., & Huang, Y. (2024). Failure mode and effects analysis using an improved pignistic probability transformation function and grey relational projection method. Complex & Intelligent Systems, 10(2), 2233–2247. https://doi.org/10.1007/s40747-023-01268-0
Tetougueni, C. D., Zampieri, P., & Pellegrino, C. (2020). Structural performance of a steel cable-stayed bridge under blast loading considering different stay patterns. Engineering Structures, 219, Article 110739. https://doi.org/10.1016/j.engstruct.2020.110739
Valdano, E., Poletto, C., Giovannini, A., Palma, D., Savini, L., & Colizza, V. (2015). Predicting epidemic risk from past temporal contact data. Plos Computational Biology, 11(3), Article e1004152. https://doi.org/10.1371/journal.pcbi.1004152
Wang, Y., & Elhag, T. M. S. (2006). Fuzzy TOPSIS method based on alpha level sets with an application to bridge risk assessment. Expert Systems with Applications, 31, 309–319. https://doi.org/10.1016/j.eswa.2005.09.040
Wang, Y., & Elhag, T. M. S. (2007). A fuzzy group decision making approach for bridge risk assessment. Computers & Industrial Engineering, 53(1), 137–148. https://doi.org/10.1016/j.cie.2007.04.009
Wang, X., & Zhang, Z. (2022). Residual axial capacity of square recycled aggregate concrete-filled steel tube columns after blast loads. Journal of Building Engineering, 47, Article 103865. https://doi.org/10.1016/j.jobe.2021.103865
Wang, Y., Li, Z., Tang, Z., & Zeng, G. (2011). A GIS-based spatial multi-criteria approach for flood risk assessment in the Dongting lake region, Hunan, central China. Water Resources Management, 25, 3465–3484. http://doi.org/10.1007/s11269-011-9866-2
Yan, Y., Hou, X., Zheng, W., & Fei, H. (2022). The damage response of RC columns with considering different longitudinal and shear reinforcement under demolition blasting. Journal of Building Engineering, 62, Article 105396. https://doi.org/10.1016/j.jobe.2022.105396
Yang, B., Wang, S., & Bao, Y. (2014). New efficient regression method for local AADT estimation via SCAD variable selection. IEEE Transactions on Intelligent Transportation Systems, 15(6), 2726–2731. https://doi.org/10.1109/TITS.2014.2318039
Yu, R., Chen, L., Fang, Q., Yan, H., & Chen, G. (2019). Generation of pressure-impulse diagrams for failure modes of RC columns subjected to blast loads. Engineering Failure Analysis, 100, 520–535. https://doi.org/10.1016/j.engfailanal.2019.02.001
Zeng, J., An, M., & Smith, N. J. (2007). Application of a fuzzy based decision making methodology to construction project risk assessment. International Journal of Project Management, 25(6), 589–600. https://doi.org/10.1016/j.ijproman.2007.02.006
Zhen, Y., Liu, S., Zhong, G., Zhou, Z., Liang, J., Zheng, W., & Fang, Q. (2022). Risk assessment of flash flood to buildings using an indicator-based methodology: a case study of mountainous rural settlements in southwest China. Frontiers in Environmental Science, 10, Article 931029. https://doi.org/10.3389/fenvs.2022.931029
Zhou, X., Huang, B., Wang, X., & Xia, Y. (2022). Deep learning-based rapid damage assessment of RC columns under blast loading. Engineering Structures, 271, Article 114949. https://doi.org/10.1016/j.engstruct.2022.114949
Zhu, M., Liu, J., Wang, Q., & Feng, X. (2010). Experimental research on square steel tubular columns filled with steel-reinforced self-consolidating high-strength concrete under axial load. Engineering Structures, 32(8), 2278–2286. https://doi.org/10.1016/j.engstruct.2010.04.002
View article in other formats
Published
Issue
Section
Copyright
Copyright (c) 2025 The Author(s). Published by Vilnius Gediminas Technical University.
License
This work is licensed under a Creative Commons Attribution 4.0 International License.