Investigation of steel fibre pullout and modeling of bridging behaviour in SFRC

    Ulvis Skadins Affiliation
    ; Janis Brauns Affiliation


By adding fibres to concrete mix the objective is to bridge discrete cracks providing for some control to the fracture process and increase the fracture energy. Fibres become active mainly when cracking starts and deformation of the fibre occurs. Pullout tests with four types of fibres with different orientation, embedment lengths, and concrete strengths are performed to simulate the bridging process. Fibre pullout behaviour is analysed for relatively small slippage displacement to keep it close to real designing situations. The test results show significant effect of fibre type on pullout behaviour, nevertheless the effect is intangible on fibres inclined at 30 degrees or more. An effective displacement is introduced, derived from experimental force-slip curves, when fibre becomes involved in bridging. Based on the effective displacement and simplified average force-slip curves a numerical model is proposed to analyse the tensile stresses transferred by fibres crossing a crack.

Keyword : bond strength, crack width, orientation angle, pullout test, stress transfer

How to Cite
Skadins, U., & Brauns, J. (2012). Investigation of steel fibre pullout and modeling of bridging behaviour in SFRC. Engineering Structures and Technologies, 4(3), 77-88.
Published in Issue
Oct 4, 2012
Abstract Views
PDF Downloads
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.