Share:


Enhancing performance characteristics of equipment of sea and river transport by using epoxy composites

    Andriy Buketov Affiliation
    ; Pavlo Maruschak Affiliation
    ; Oleksandr Sapronov Affiliation
    ; Dmytro Zinchenko Affiliation
    ; Vitaliy Yatsyuk Affiliation
    ; Sergey Panin Affiliation

Abstract

Coatings based on epoxy diane oligomer ED-20 are being developed as environmentally benign, foulingresistant marine coatings. Silver oxide and carbonate (mixture) was used as filler, the dispersion of which is 0.5 µm. It is proved that for the formation of composites with the improved physical and mechanical properties it is necessary to add Mechanical Mixture of Silver Carbonate and Oxide (MMSCO) in the amount of q = 0.050…0.250 pts. wt. into the epoxy diane oligomer ED-20 (100 pts. wt.). The obtained values of impact toughness of composites during the introduction of MMSCO into the binder increased by 2.5 times compared to the epoxy matrix. Moreover, the maximum capacity to resist impact loads, including fracture toughness, was demonstrated by the Composite Material (CM) with the filler content q = 0.050 pts. wt. Impact toughness of this CM is а = 18.53 kJ/m2. The developed materials and protective coatings based on them were used on the dry cargo ship Oles Honchar.

Keyword : ship, corrosion, epoxy composites, fracture, coatings

How to Cite
Buketov, A., Maruschak, P., Sapronov, O., Zinchenko, D., Yatsyuk, V., & Panin, S. (2016). Enhancing performance characteristics of equipment of sea and river transport by using epoxy composites. Transport, 31(3), 333–342. https://doi.org/10.3846/16484142.2016.1212267
Published in Issue
Sep 21, 2016
Abstract Views
724
PDF Downloads
481
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.