Share:


Behaviour of hollow concrete‐filled steel tubular composite elements

    Artiomas Kuranovas Affiliation
    ; Audronis Kazimieras Kvedaras Affiliation

Abstract

Behaviour of composite steel‐concrete elements in various loading stages is quite well analysed by theoretical investigations and experiments. Concrete‐Filled Steel Tube (CFST) is one of many composite elements used at present in civil engineering. Different approaches and design philosophies were adopted in different design codes for it. But for hollow CFST elements, which are more effective than ordinary CFST, any code does not provide information about how to design these elements. Further investigations of hollow composite CFST elements are needed. In loading stage, when a particular level of stresses exists, an interaction between steel tube and concrete core appears and therefore a complex stress state of element takes place, which increases the load‐bearing capacity of the whole composite element. This interaction between components of CFST elements is reached because of different material properties, such as Poisson's ratio, elasticity modulus etc. In this article reasons of the above‐mentioned complex stress state appearance and behaviour of hollow CFST element components in different load stages of compressed stub structural member are analysed. The test results are presented in diagrams, tables. Previous researches of other investigators are summarised. Differences and similarities in behaviour of solid concrete and composite elements and hollow members with different number of concrete core layers are discussed.


Tuščiavidurių betonšerdžių plieninių vamzdinių strypų elgsena


Santrauka. Dažniausiai naudojamų įvairiai apkrautų pilnavidurių betonšerdžių plieninių vamzdinių elementų elgsena teoriškai pakankamai išsamiai išanalizuota ir pagrįsta bandymais. Tuščiaviduriai betonšerdžiai plieniniai strypiniai elementai (TBPS) yra viena iš tokių kompozitinių elementų rūšių. Pasaulyje naudojami įvairūs norminiai dokumentai ir projektavimo rekomendacijos yra pritaikytos pilnaviduriams BPS. Tuščiavidurių elementų, kurie neretai yra efektyvesni nei pilnaviduriai, tyrimų ir jų elgsenos teorin­s analiz­s n­ra gausu. Apkrovimo metu, kai pasiekiamas tam tikras įtempių būvis, tarp kompozitinio elemento komponentų atsiranda sąveika. Tod­l susikuria sud­tingesnis įtempių būvis bei padid­ja elemento laikomoji galia. Ši sąveika atsiranda d­l naudojamų medžiagų skirtingų savybių, tokių kaip Puasono koeficientas, tamprumo modulis ir t. t. Straipsnyje pateiktos sud­tingo įtempių būvio atsiradimo priežastys bei jų elgsenos, veikiant įvairioms gniuždomosioms apkrovoms, ypatumai. Aprašyti ir išanalizuoti bandymo metu gauti rezultatai, kurie pateikti grafikų ir lentelių pavidalo. Betoninių ir kompozitinių vienasluoksnių ir dvisluoksnių TBPS elementų elgsenos panašumai ir skirtumai aptarti ir palyginti su pilnaviduriais BPS.


Reikšminiai žodžiai: kompozitin­s konstrukcijos, betonšerdžiai plieniniai vamzdžiai, tuščiaviduriai, centrifugavimas, sąveika tarp komponentų, elgsena, betono triašis būvis, Puasono koeficientas.


First Published Online: 14 Oct 2010

Keyword : composite structures, centrifuging, hollow concrete-filled steel tubes, interaction of components, behaviour, concrete triaxial stress state, Poisson’s ratio, micro-cracking

How to Cite
Kuranovas, A., & Kvedaras, A. K. (2007). Behaviour of hollow concrete‐filled steel tubular composite elements. Journal of Civil Engineering and Management, 13(2), 131-141. https://doi.org/10.3846/13923730.2007.9636429
Published in Issue
Jun 30, 2007
Abstract Views
472
PDF Downloads
302
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.