Compressive strength and gel formation of enhanced geopolymer with addition of nanomaterials – a review
DOI: https://doi.org/10.3846/jcem.2026.27863Abstract
Nanomaterial reinforcement has emerged as a pivotal strategy to overcome the mechanical and durability limitations of traditional geopolymer binders. This review systematically evaluates the integration of zero- to one-dimensional nanomaterials, like graphene oxide, carbon nanotubes, and nano silica, etc., into geopolymer matrices synthesized from diverse industrial precursors such as fly ash, slag, and red mud. The fundamental mechanisms of reinforcement, specifically nucleation, matrix densification, and micro-crack bridging, are analyzed to illustrate the transition from brittle to ductile behavior. Beyond mechanical enhancement, the critical roles of dispersion techniques, particle size, and optimal dosages in mitigating workability trade-offs and agglomeration are examined. This work delineates the relationship between microstructural evolution and crack-arrest mechanisms through a systematic evaluation of SEM, XRD, and Nanoindentation results reported in recent literature. Furthermore, the review explores innovative processing trends, such as the synergy between nano-additives and rapid microwave curing, which significantly reduces energy consumption compared to conventional thermal methods. Finally, industrial scaling challenges, cost-effectiveness, and the environmental life-cycle of nano-engineered composites are addressed. By identifying critical research gaps in multi-nanomaterial synergy and standardized durability testing, this paper provides a strategic roadmap for the development of high-performance, resilient, and sustainable geopolymer infrastructure.
Keywords:
geopolymer composites, nanomaterials, compressive strength, microstructure, durability, nano-silica, carbon nanotubes, graphene oxide, nano-clay, nano-titanium, nano-aluminumHow to Cite
Share
License
Copyright (c) 2026 The Author(s). Published by Vilnius Gediminas Technical University.
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Abbasi, S. M., Ahmadi, H., Khalaj, G., & Ghasemi, B. (2016). Microstructure and mechanical properties of a metakaolinite-based geopolymer nanocomposite reinforced with carbon nanotubes. Ceramics International, 42(14), 15171–15176. https://doi.org/10.1016/j.ceramint.2016.06.080
Abbass, M., & Singh, G. (2022). Experimental investigation of engineered alkali-activated fibrous geopolymer concrete. Journal of Building Pathology and Rehabilitation, 8(1), Article 12. https://doi.org/10.1007/s41024-022-00259-x
Abdalla, J. A., Thomas, B. S., Hawileh, R. A., Yang, J., Jindal, B. B., & Ariyachandra, E. (2022). Influence of nano-TiO2, nano-Fe2O3, nanoclay and nano-CaCO3 on the properties of cement/geopolymer concrete. Cleaner Materials, 4, Article 100061. https://doi.org/10.1016/j.clema.2022.100061
Aboulayt, A., Jaafri, R., Samouh, H., El Idrissi, A. C., Roziere, E., Moussa, R., & Loukili, A. (2018). Stability of a new geopolymer grout: Rheological and mechanical performances of metakaolin-fly ash binary mixtures. Construction and Building Materials, 181, 420–436. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2018.06.025
Ahmadi, H., Khalaj, G., Najafi, A., Abbasi, S. M., & Safari, M. (2022). Metakaolin-red mud/carbon nanotubes geopolymer nanocomposite: Mechanical properties and structural studies. Materials Research Express, 9(2), Article 025011. https://doi.org/10.1088/2053-1591/ac54d6
Ahmed, D. A., El-Apasery, M. A., & Ragai, S. M. (2023). Development of an antimicrobial inorganic polymer based on fly ash and metakaolin incorporated by nano-TiO2 for reactive dye removal. Scientific Reports, 13(1), Article 19889. https://doi.org/10.1038/s41598-023-47032-9
Ai, T., Zhong, D., Zhang, Y., Zong, J., Yan, X., & Niu, Y. (2021). The effect of red mud content on the compressive strength of geopolymers under different curing systems. Buildings, 11(7), Article 298. https://doi.org/10.3390/buildings11070298
Al-Baldawi, M., Aziz, F., Abbas, A., Mohd Nasir, N., Abdan, K., & Sutan, N. (2025). Bibliometric review on geopolymer modified with nanomaterials using VOSViewer. Pertanika Journal of Science and Technology, 33(S4), 1–25. https://doi.org/10.47836/pjst.33.S4.01
Al-Saffar, F. Y., Wong, L. S., & Paul, S. C. (2023). An elucidative review of the nanomaterial effect on the durability and Calcium-Silicate-Hydrate (C-S-H) gel development of concrete. Gels, 9(8), Article 613. https://doi.org/10.3390/gels9080613
Alanazi, H. (2022). Study of the interfacial transition zone characteristics of geopolymer and conventional concretes. Gels, 8(2), Article 105. https://doi.org/10.3390/gels8020105
Algaifi, H. A., Mohamed, A. M., Alsuhaibani, E., Shahidan, S., Alrshoudi, F., Huseien, G. F., & Bakar, S. A. (2021). Optimisation of GBFS, fly ash, and nano-silica contents in alkali-activated mortars. Polymers, 13(16), Article 2750. https://doi.org/10.3390/polym13162750
Ali, A. M. M., Jabir, S. M., Kadhim, A. A., & Almagtome, A. A. (2022). Nanotechnology practices and cost restructure for effective cost management under Industry 4.0 based manufacturing systems. TEM Journal, 11, 1193–1199. https://doi.org/10.18421/TEM113-26
Alghrairi, N. S., Aziz, F. N., AlGhazali, N. A., Rashid, S. A., Mohmed, M. Z., & Ibrahim, A. M. (2025). Physical, mechanical, durability and microstructure properties of lightweight concrete containing nanomaterials: A comprehensive review. Journal of Rehabilitation in Civil Engineering, 13(2), 94–127. https://doi.org/10.22075/jrce.2024.33140.1987
Alomayri, T. (2019). Experimental study of the microstructural and mechanical properties of geopolymer paste with nano material (Al2O3). Journal of Building Engineering, 25, Article 100788. https://doi.org/10.1016/j.jobe.2019.100788
Alomayri, T., Raza, A., Elhadi, K. M., & Shaikh, F. (2025). Mechanical, microstructural, and thermal characterization of geopolymer composites with nano-alumina particles and micro steel fibers. Structural Concrete, 26(2), 1540–1559. https://doi.org/10.1002/suco.202400477
Alwan, A. S., & Fathi, M. (2026). Investigation of the fresh and hardened properties of fly ash and metakaolin based geopolymer concrete containing of nanoparticles. Advances in Science and Technology Research Journal, 20(2), 529–551. https://doi.org/10.12913/22998624/213623
Amar, R., Devanand, R., Harsha, H. N., & Sachin, K. C. (2023). Experimental studies on GGBS based geopolymer concrete. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.04.297
Arab, M. A. E.-S., Mohamed, A. S., Taha, M. K., & Nasr, A. (2025). Microstructure, durability and mechanical properties of high strength geopolymer concrete containing calcinated nano-silica fume/nano-alumina blend. Construction and Building Materials, 472, Article 140903. https://doi.org/10.1016/j.conbuildmat.2025.140903
Arif, M., Hasan, S. D., & Siddiqui, S. (2023). Effect of nano silica on strength and permeability of concrete. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.04.073
Arpitha, B. J., & Parthasarathy, P. (2023). Effect of nano-alumina and graphene oxide on the behavior of geopolymer composites: A state of the art of review. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.03.708
Arshad, M., Raza, A., Khan, Q. u. Z., Kahla, N. B., & Elhag, A. B. (2024). Evaluation of mechanical and microstructural characterization of microfiber-reinforced nanocomposites comprising nano-alumina. Arabian Journal for Science and Engineering, 49(4), 5079–5094. https://doi.org/10.1007/s13369-023-08368-6
Assaedi, H. S., & Olawale, M. D. (2022). Impact of nano-alumina on the mechanical characterization of PVA fibre-reinforced geopolymer composites. Journal of Taibah University for Science, 16(1), 828–835. https://doi.org/10.1080/16583655.2022.2119735
Assaedi, H., Shaikh, F. U. A., & Low, I. M. (2016). Effect of nano-clay on mechanical and thermal properties of geopolymer. Journal of Asian Ceramic Societies, 4(1), 19–28. https://doi.org/10.1016/j.jascer.2015.10.004
Assaedi, H., Shaikh, F. U. A., & Low, I. M. (2017). Effect of nanoclay on durability and mechanical properties of flax fabric reinforced geopolymer composites. Journal of Asian Ceramic Societies, 5(1), 62–70. https://doi.org/10.1016/j.jascer.2017.01.003
Bai, B., Bai, F., Nie, Q., & Jia, X. (2023). A high-strength red mud–fly ash geopolymer and the implications of curing temperature. Powder Technology, 416, Article 118242. https://doi.org/https://doi.org/10.1016/j.powtec.2023.118242
Balapanov, B., Montayev, S., Aygun, B., & Uysal, M. (2024). Accelerated microwave curing of hybrid geopolymers with nano-silica for enhanced physico-mechanical properties. Journal of Sustainable Construction Materials and Technologies, 9(4), 346–354. https://doi.org/10.47481/jscmt.1606833
Bautista-Gutierrez, K. P., Herrera-May, A. L., Santamaría-López, J. M., Honorato-Moreno, A., & Zamora-Castro, S. A. (2019). Recent progress in nanomaterials for modern concrete infrastructure: Advantages and challenges. Materials, 12(21), Article 3548. https://doi.org/10.3390/ma12213548
Bheel, N., Alwetaishi, M., Jae, I. A., Syamsir, A., Alraeeini, A. S., Waheeb, S. A., Alkhattabi, L., & Benjeddou, O. (2024). Enhancing performance and sustainability of GGBFS-based self-compacting geopolymer concrete blended with coal bottom ash and metakaolin by using RSM modelling. Scientific Reports, 14(1), Article 19754. https://doi.org/10.1038/s41598-024-70800-0
Black, L., Purnell, P., & Hill, J. (2010). Current themes in cement research. Advances in Applied Ceramics, 109(5), 253–259. https://doi.org/10.1179/174367510x12714358363805
Błaszczyński, T. Z., & Król, M. R. (2017). Alkaline activator impact on the geopolymer binders. IOP Conference Series: Materials Science and Engineering, 245(2), Article 022036. https://doi.org/10.1088/1757-899X/245/2/022036
Boumaza, A., Khouadjia, M. L. K., Isleem, H. F., Hamdi, O. M., & Khishe, M. (2025). Effect of blast furnace slag on the fresh and hardened properties of volcanic tuff-based geopolymer mortars. Scientific Reports, 15(1), Article 13651. https://doi.org/10.1038/s41598-025-98382-5
Chen, W., & Li, J. (2023). Effects of different silicon sources on the properties of geopolymer planting concrete mixed with red mud. Sustainability, 15(5), Article 4427. https://doi.org/10.3390/su15054427
Cheng, T. W., Lo, K. W., Lin, K. L., & Lan, J. Y. (2019). Study on the effects Nano‐SiO2 and spent catalyst ratios on characteristics of metakaolin‐based geopolymers. Environmental Progress & Sustainable Energy, 38(1), 220–227. https://doi.org/10.1002/ep.12921
Chiranjeevi, K., Abraham, M., Rath, B., & Praveenkumar, T. R. (2023). Enhancing the properties of geopolymer concrete using nano-silica and microstructure assessment: A sustainable approach. Scientific Reports, 13(1), Article 17302. https://doi.org/10.1038/s41598-023-44491-y
da Luz, G., Gleize, P. J. P., Batiston, E. R., & Pelisser, F. (2019). Effect of pristine and functionalized carbon nanotubes on microstructural, rheological, and mechanical behaviors of metakaolin-based geopolymer. Cement and Concrete Composites, 104, Article 103332. https://doi.org/10.1016/j.cemconcomp.2019.05.015
Davidovits, J. (1979). Synthesis of new high-temperature geo-polymers for reinforced plastics/composites. In Proceedings of PACTEC’79 Society of Plastics Engineers (pp. 151–154), Costa Mesa, California, USA.
Davidovits, J. (2008). Geopolymer: Chemistry and applications. Geopolymet institute.
Deb, P. S., Nath, P., & Sarker, P. K. (2014). The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature. Materials & Design (1980-2015), 62, 32–39. https://doi.org/10.1016/j.matdes.2014.05.001
Deb, P. S., Sarker, P. K., & Barbhuiya, S. (2015). Effects of nano-silica on the strength development of geopolymer cured at room temperature. Construction and Building Materials, 101, 675–683. https://doi.org/10.1016/j.conbuildmat.2015.10.044
Dong, Y., Zhou, M., Xiang, Y., Wan, S., Li, H., & Hou, H. (2019). Barrier effect of coal bottom ash-based geopolymers on soil contaminated by heavy metals. RSC Advances, 9(49), 28695–28703. https://doi.org/10.1039/C9RA05542H
Drabczyk, A., Kudłacik-Kramarczyk, S., Korniejenko, K., Figiela, B., & Furtos, G. (2023). Review of geopolymer nanocomposites: Novel materials for sustainable development. Materials, 16(9), Article 3478. https://doi.org/10.3390/ma16093478
Du, S., Wu, J., AlShareedah, O., & Shi, X. (2019). Nanotechnology in cement-based materials: a review of durability, modeling, and advanced characterization. Nanomaterials, 9(9), Article 1213. https://www.mdpi.com/2079-4991/9/9/1213
Dudek, M., & Sitarz, M. (2020). Analysis of changes in the microstructure of geopolymer mortar after exposure to high temperatures. Materials, 13(19), Article 4263. https://doi.org/10.3390/ma13194263
Ferreira, M. T., Soldado, E., Borsoi, G., Mendes, M. P., & Flores-Colen, I. (2023). Nanomaterials applied in the construction sector: environmental, human health, and economic indicators. Applied Sciences, 13(23), Article 12896. https://doi.org/10.3390/app132312896
Fong, W., Chang, W., Teo, S., Tay, K. M., Jamali, A., Jambli, M., & Ismail, I. (2025). Factors controlling durability of geopolymer concretes in chloride determined via growing self-organizing maps. Pertanika Journal of Science and Technology, 33(1), 405–421. https://doi.org/10.47836/pjst.33.1.18
Gadkar, A., & Subramaniam, K. V. L. (2021). Rheology control of alkali-activated fly ash with nano clay for cellular geopolymer application. Construction and Building Materials, 283, Article 122687. https://doi.org/10.1016/j.conbuildmat.2021.122687
Gamal, H. A., El-Feky, M. S., Alharbi, Y. R., Abadel, A. A., & Kohail, M. (2021). Enhancement of the concrete durability with hybrid nano materials. Sustainability, 13(3), Article 1373. https://doi.org/10.3390/su13031373
Gao, K., Lin, K.-L., Wang, D., Shiu, H.-S., Hwang, C.-L., & Cheng, T.-W. (2013). Effects of Nano-SiO2 on setting time and compressive strength of alkali-activated metakaolin-based geopolymer. The Open Civil Engineering Journal, 7, 84–92. https://doi.org/10.2174/1874149501307010084
Gao, X., Yu, Q. L., Lazaro, A., & Brouwers, H. J. H. (2017). Investigation on a green olivine nano-silica source based activator in alkali activated slag-fly ash blends: Reaction kinetics, gel structure and carbon footprint. Cement and Concrete Research, 100, 129–139. https://doi.org/10.1016/j.cemconres.2017.06.007
Gao, X., Yu, Q. L., Lazaro, A., & Brouwers, H. J. H. (2018). Evaluating an eco-olivine nanosilica as an alternative silica source in alkali-activated composites. Journal of Materials in Civil Engineering, 30(3), Article 04018016. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002169
Geragop, R. H., & Mokhatar, S. N. (2023). Investigating the reaction of coal bottom ash (CBA) as partial cement replacement in mortar. Recent Trends in Civil Engineering and Built Environment, 4(2), 361–371.
Ghanim, A. A. J., Amin, M., Zeyad, A. M., Tayeh, B. A., & Agwa, I. S. (2023). Effect of modified nano-titanium and fly ash on ultra-high-performance concrete properties. Structural Concrete, 24(5), 6815–6832. https://doi.org/10.1002/suco.202300053
Gómez-Casero, M. A., De Dios-Arana, C., Bueno-Rodríguez, J. S., Pérez-Villarejo, L., & Eliche-Quesada, D. (2022). Physical, mechanical and thermal properties of metakaolin-fly ash geopolymers. Sustainable Chemistry and Pharmacy, 26, Article 100620. https://doi.org/https://doi.org/10.1016/j.scp.2022.100620
Gopala Krishna Sastry, K. V. S., Sahitya, P., & Ravitheja, A. (2021). Influence of nano TiO2 on strength and durability properties of geopolymer concrete. Materials Today: Proceedings, 45, 1017–1025. https://doi.org/10.1016/j.matpr.2020.03.139
Goyal, R., Verma, V. K., & Singh, N. B. (2024). Green slag cement with nano copper oxide and nano silica: Enhanced antimicrobial and structural properties. Journal of Building Engineering, 97, Article 110975. https://doi.org/10.1016/j.jobe.2024.110975
Gulam, N. F. B. A., Kaish, A. B. M. A., Mahmood, A., Raman, S. N., Jamil, M., & Hamid, R. (2021). A review on the effect of fly ash, RHA and slag on the synthesizing of coal bottom ash (CBA) based geopolymer. Engineering Proceedings, 11(1), Article 20. https://doi.org/10.3390/ASEC2021-11164
Guo, S., Qiao, X., Zhao, T., & Wang, Y.-S. (2020). Preparation of highly dispersed graphene and its effect on the mechanical properties and microstructures of geopolymer. Journal of Materials in Civil Engineering, 32(11), Article 04020327. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003424
Hai, R., Zheng, J., Li, J., Hui, C., & Liu, J. (2024). Preparation mechanism and properties of thermal activated red mud and its geopolymer repair mortar. Case Studies in Construction Materials, 20, Article e02853. https://doi.org/10.1016/j.cscm.2024.e02853
Han, Q., Zhang, P., Wu, J., Jing, Y., Zhang, D., & Zhang, T. (2022). Comprehensive review of the properties of fly ash-based geopolymer with additive of nano-SiO2. Nanotechnology Reviews, 11(1), 1478–1498. https://doi.org/10.1515/ntrev-2022-0092
Han, X., Zhang, P., Zheng, Y., & Wang, J. (2023). Utilization of municipal solid waste incineration fly ash with coal fly ash/metakaolin for geopolymer composites preparation. Construction and Building Materials, 403, Article 133060. https://doi.org/10.1016/j.conbuildmat.2023.133060
Hassaan, M. M., Khater, H. M., El-Mahllawy, M. S., & El Nagar, A. M. (2015). Production of geopolymer composites enhanced by nano-kaolin material. Journal of Advanced Ceramics, 4(4), 245–252. https://doi.org/10.1007/s40145-015-0156-y
He, J., Jie, Y., Zhang, J., Yu, Y., & Zhang, G. (2013). Synthesis and characterization of red mud and rice husk ash-based geopolymer composites. Cement and Concrete Composites, 37, 108–118. https://doi.org/10.1016/j.cemconcomp.2012.11.010
Helvacı, F., & Görhan, G. (2025). Investigation of the effects of alkaline activators and sand type on the properties of calcined zeolite-based geopolymer. Journal of the Australian Ceramic Society, 61, 1901–1919. https://doi.org/10.1007/s41779-025-01196-x
Hirose, A., Takagi, A., Nishimura, T., Tsuda, H., Sakamoto, Y., Ogata, A., Nakae, D., Hino, O., & Kanno, J. (2011). Importance of researches on chronic effects by manufactured nanomaterials. YAKUGAKU ZASSHI, 131(2), 195–201. https://doi.org/10.1248/yakushi.131.195
Hossain, S. S., Roy, P. K., & Bae, C.-J. (2021). Utilization of waste rice husk ash for sustainable geopolymer: A review. Construction and Building Materials, 310, Article 125218. https://doi.org/10.1016/j.conbuildmat.2021.125218
Indwar, R., Mishra, U., & Titiksh, A. (2024). Geopolymer concrete containing nanomaterials—a step toward sustainable construction. Environmental Science and Pollution Research, 32, 24356–24397. https://doi.org/10.1007/s11356-024-34172-2
Jalal, P., Srivastava, V., & A. K, T. (2024). Geopolymer concrete: An alternative to conventional concrete for sustainable construction. Journal of Environmental Nanotechnology, 13(4), 218–225. https://doi.org/10.13074/jent.2024.12.2441122
Jin, Q., Zhang, P., Wu, J., & Sha, D. (2022). Mechanical properties of nano-SiO2 reinforced geopolymer concrete under the coupling effect of a wet–thermal and chloride salt environment. Polymers, 14(11), Article 2298. https://doi.org/10.3390/polym14112298
Jindal, B., & Sharma, R. (2020). The effect of nanomaterials on properties of geopolymers derived from industrial by-products: A state-of-the-art review. Construction and Building Materials, 252, Article 119028. https://doi.org/10.1016/j.conbuildmat.2020.119028
Jittabut, P., & Horpibulsuk, S. (2019). Physical and microstructure properties of geopolymer nanocomposite reinforced with carbon nanotubes. Materials Today: Proceedings, 17, 1682–1692. https://doi.org/10.1016/j.matpr.2019.06.199
Kamal, H., Kadhim, M., & Hasan, L. (2025). Impact of nanoparticles on the performance of metakaolin-based geopolymer composites. Journal of the Mechanical Behavior of Materials, 34, Article 20250072. https://doi.org/10.1515/jmbm-2025-0072
Karuppaiyan, J., & Jeyalakshmi, R. (2024). Dielectric response of alkali aluminosilicate hydrate and silico alumino phosphate network present in metakaolin–graphene oxide geopolymer: A comparative study. Inorganic Chemistry Communications, 161, Article 112036. https://doi.org/10.1016/j.inoche.2024.112036
Kaur, K., Singh, J., & Kaur, M. (2018). Compressive strength of rice husk ash based geopolymer: The effect of alkaline activator. Construction and Building Materials, 169, 188–192. https://doi.org/10.1016/j.conbuildmat.2018.02.200
Khater, H., El-Sabbagh, B., Fanny, M., Ezzat, M., & Lottfy, M. (2013). Effect of nano-clay on alkali activated water-cooled slag geopolymer. Current Journal of Applied Science and Technology, 3, 764–776. https://doi.org/10.9734/BJAST/2013/2690
Khattab, S. A., Elshikh, M. M. Y., Elemam, W. E., Elshami, A. A., & Youssf, O. (2023). Effect of magnetized water-based alkaline activator on geopolymer concrete mechanical performance and durability. Sustainability, 15(23), Article 16315. https://doi.org/10.3390/su152316315
Kırgız, M. S., Khatib, J., Campilho, R. D. S. G., Elahi, A., Ashteyat, A., Gonzalez-Lezcano, R. A., Tahenni, T., Bamigboye, G., Nagaprasad, N., & Ramaswamy, K. (2025). Modification mechanism of silver nanoparticles-functionalized MW-CNT and GGBFS and CQDs on the structural properties of geopolymer reinforced-composite beam. Scientific Reports, 15(1), Article 27997. https://doi.org/10.1038/s41598-025-08910-6
Kishore, K., Pandey, A., Wagri, N. K., Saxena, A., Patel, J., & Al-Fakih, A. (2023). Technological challenges in nanoparticle-modified geopolymer concrete: A comprehensive review on nanomaterial dispersion, characterization techniques and its mechanical properties. Case Studies in Construction Materials, 19, Article e02265. https://doi.org/10.1016/j.cscm.2023.e02265
Knežević, S., Ivanović, M., Stanković, D., Kisić, D., Nenadović, S., Potočnik, J., & Nenadović, M. (2023). Microstructural analysis of thermally treated geopolymer incorporated with neodymium. Nanomaterials, 13(10), Article 1663. https://doi.org/10.3390/nano13101663
Kuchibhatla, S. V. N. T., Karakoti, A. S., Baer, D. R., Samudrala, S., Engelhard, M. H., Amonette, J. E., Thevuthasan, S., & Seal, S. (2012). Influence of aging and environment on nanoparticle chemistry: implication to confinement effects in nanoceria. The Journal of Physical Chemistry C, 116(26), 14108–14114. https://doi.org/10.1021/jp300725s
Lakew, A. M., Canpolat, O., Al-Mashhadani, M. M., Uysal, M., Niş, A., Aygörmez, Y., & Bayati, M. (2023). Combined effect of using steel fibers and demolition waste aggregates on the performance of fly ash/slag based geopolymer concrete. European Journal of Environmental and Civil Engineering, 27(15), 4251–4278. https://doi.org/10.1080/19648189.2023.2189468
Lazarus, R. R., Johnson Alengaram, U., Wan Jaafar, W. Z., Lai, S. H., Ibrahim, M. S. I. B., & Srinivas M, K. (2025). Exploring the use of in-house sodium silicate from agro-industrial by-products in pervious geopolymer concrete. Journal of Civil Engineering and Management, 31(6), 670–686. https://doi.org/10.3846/jcem.2025.23785
Lei, Z., Pavia, S., & Wang, X. (2024). Biomass ash waste from agricultural residues: Characterisation, reactivity and potential to develop one-part geopolymer cement. Construction and Building Materials, 431, Article 136544. https://doi.org/10.1016/j.conbuildmat.2024.136544
Li, Z., & Shi, X. (2025). Influence of graphene oxide on resistance of a fly ash-based geopolymer paste to cyclic freeze-thaw damage and post-damage carbonation. Cement and Concrete Composites, 160, Article 106023. https://doi.org/10.1016/j.cemconcomp.2025.106023
Li, Y., Min, X., Ke, Y., Liu, D., & Tang, C. (2019). Preparation of red mud-based geopolymer materials from MSWI fly ash and red mud by mechanical activation. Waste Management, 83, 202-208. https://doi.org/10.1016/j.wasman.2018.11.019
Li, F., Liu, L., Yang, Z., & Li, S. (2021a). Physical and mechanical properties and micro characteristics of fly ash-based geopolymer paste incorporated with waste Granulated Blast Furnace Slag (GBFS) and functionalized Multi-Walled Carbon Nanotubes (MWCNTs). Journal of Hazardous Materials, 401, Article 123339. https://doi.org/10.1016/j.jhazmat.2020.123339
Li, F., Liu, L., ZhemingYang, & Li, S. (2021b). Influence of modified multi-walled carbon nanotubes on the mechanical behavior and toughening mechanism of an environmentally friendly granulated blast furnace slag-based geopolymer matrix. Ceramics International, 47(1), 907–922. https://doi.org/10.1016/j.ceramint.2020.08.203
Li, J., Si, J., Luo, F., Zuo, C., Zhang, P., Sun, Y., Li, W., & Miao, S. (2022a). Self-compensating geopolymer utilizing nano-clay and chopped basalt fibers. Construction and Building Materials, 357, Article 129302. https://doi.org/10.1016/j.conbuildmat.2022.129302
Li, M., Luo, R., Qin, L., Liu, H., Duan, P., Jing, W., Zhang, Z., & Liu, X. (2022b). High temperature properties of graphene oxide modified metakaolin based geopolymer paste. Cement and Concrete Composites, 125, Article 104318. https://doi.org/10.1016/j.cemconcomp.2021.104318
Li, Y., Dong, Y., El-Naggar, M. R., Wang, F., & Zhao, Y. (2024). The influence of particle size and calcium content on performance characteristics of metakaolin- and fly-ash-based geopolymer gels. Gels, 10(10), Article 639. https://doi.org/10.3390/gels10100639
Liu, X., Wu, Y., Li, M., Jiang, J., Guo, L., Wang, W., Zhang, W., Zhang, Z., & Duan, P. (2020). Effects of graphene oxide on microstructure and mechanical properties of graphene oxide-geopolymer composites. Construction and Building Materials, 247, Article 118544. https://doi.org/10.1016/j.conbuildmat.2020.118544
Long, Q., Zhao, Y., Zhang, B., Yang, H., Luo, Z., Li, Z., Zhang, G., & Liu, K. (2024). Interfacial behavior of slag, fly ash, and red mud-based geopolymer mortar with concrete substrate: Mechanical properties and microstructure. Buildings, 14(3), Article 652. https://doi.org/10.3390/buildings14030652
Lu, C.-G., Zhang, X.-C., & Chen, X.-F. (2024). Maximizing nano-silica efficiency in laboratory-simulated recycled concrete aggregate via prior accelerated carbonation: An effective strategy to up-cycle construction wastes. Molecules, 29(24), Article 5995. https://doi.org/10.3390/molecules29245995
Luhar, I., & Luhar, S. (2022). A comprehensive review on fly ash-based geopolymer. Journal of Composites Science, 6(8), Article 219. https://doi.org/10.3390/jcs6080219
Luna-Galiano, Y., Fernández-Pereira, C., & Izquierdo, M. (2016). Contributions to the study of porosity in fly ash-based geopolymers. Relationship between degree of reaction, porosity and compressive strength. Materiales de Construcción, 66(324), Article e098. https://doi.org/10.3989/mc.2016.10215
Luo, Z., Li, W., Gan, Y., He, X., Castel, A., & Sheng, D. (2021a). Nanoindentation on micromechanical properties and microstructure of geopolymer with nano-SiO2 and nano-TiO2. Cement and Concrete Composites, 117, Article 103883. https://doi.org/10.1016/j.cemconcomp.2020.103883
Luo, Z., Li, W., Li, P., Wang, K., & Shah, S. P. (2021b). Investigation on effect of nanosilica dispersion on the properties and microstructures of fly ash-based geopolymer composite. Construction and Building Materials, 282, Article 122690. https://doi.org/10.1016/j.conbuildmat.2021.122690
Luo, D., Du, Y., Zhang, J., Chen, F., & Song, Y. (2026). Synergistic effects of high-temperature curing and elemental conditioning on red mud-based geopolymer: Compressive strength and immobilization. PLoS ONE, 21(4), Article e0343975. https://doi.org/10.1371/journal.pone.0343975
Ly, H.-B. (2025). Enhanced predictive modeling and insights into geopolymer concrete compressive strength prediction. Journal of Testing and Evaluation, 53(4), 938–959. https://doi.org/10.1520/jte20230808
Ma, L., Sun, M., Yang, J., & Dai, Q. (2024). Nanosilica-enhanced geopolymer cementitious materials: Mechanistic insights from experimental and computational simulations. Journal of Building Engineering, 98, Article 111098. https://doi.org/https://doi.org/10.1016/j.jobe.2024.111098
Macías-Silva, M. A., Cedeño-Muñoz, J. S., Morales-Paredes, C. A., Tinizaray-Castillo, R., Perero-Espinoza, G. A., Rodríguez-Díaz, J. M., & Jarre-Castro, C. M. (2024). Nanomaterials in construction industry: An overview of their properties and contributions in building house. Case Studies in Chemical and Environmental Engineering, 10, Article 100863. https://doi.org/10.1016/j.cscee.2024.100863
Maglad, A. M., Zaid, O., Arbili, M. M., Ascensão, G., Șerbănoiu, A. A., Grădinaru, C. M., García, R. M., Qaidi, S. M. A., Althoey, F., & de Prado-Gil, J. (2022). A study on the properties of geopolymer concrete modified with nano graphene oxide. Buildings, 12(8), Article 1066. https://www.mdpi.com/2075-5309/12/8/1066
Mahboubi, B., Guo, Z., & Wu, H. (2019). Evaluation of durability behavior of geopolymer concrete containing nano-silica and nano-clay additives in acidic media. Journal of Civil Engineering and Materials Application, 3(3), 163–171. https://doi.org/10.22034/jcema.2019.95839
Mansi, A., Sor, N. H., Hilal, N., & Qaidi, S. M. A. (2022). The impact of nano clay on normal and high-performance concrete characteristics: A review. IOP Conference Series: Earth and Environmental Science, 961(1), Article 012085. https://doi.org/10.1088/1755-1315/961/1/012085
Maraş, M. M. (2021). Mechanical and fracture behavior of geopolymer composites reinforced with fibers by using nano-TiO2. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43(9), Article 412. https://doi.org/10.1007/s40430-021-03135-w
Mashout, H. A., Razek, T. A., Amin, M. S., Hashem, F. S., & Selim, F. A. (2023). Performance of nano titania-reinforced slag/basalt geopolymer composites. Journal of Engineering and Applied Science, 70(1), Article 106. https://doi.org/10.1186/s44147-023-00278-6
Mehta, P. K., & Monteiro, P. J. M. (2014). Concrete: Microstructure, properties, and materials. McGraw-Hill Education.
Mohajerani, A., Burnett, L., Smith, J. V., Kurmus, H., Milas, J., Arulrajah, A., Horpibulsuk, S., & Abdul Kadir, A. (2019). Nanoparticles in construction materials and other applications, and implications of nanoparticle use. Materials, 12(19), Article 3052. https://doi.org/10.3390/ma12193052
Mohseni, E., Kazemi, M. J., Koushkbaghi, M., Zehtab, B., & Behforouz, B. (2019). Evaluation of mechanical and durability properties of fiber-reinforced lightweight geopolymer composites based on rice husk ash and nano-alumina. Construction and Building Materials, 209, 532–540. https://doi.org/10.1016/j.conbuildmat.2019.03.067
Moosa, A., & Saddam, B. (2017). Synthesis and characterization of nanosilica from rice husk with applications to polymer composites. American Journal of Materials Science, 2017, 223–231.
Moradikhou, A. B., & Esparham, A. (2021). Water absorption, density, mechanical strengths and high-temperature resistance of metakaolin-based geopolymer concrete reinforced with hybrid polyolefin and simple polypropylene fibers. Advance Researches in Civil Engineeting, 3(2), 1–15. https://doi.org/10.30469/arce.2021.135121
Mudgal, M., Singh, A., Chouhan, R. K., Acharya, A., & Srivastava, A. K. (2021). Fly ash red mud geopolymer with improved mechanical strength. Cleaner Engineering and Technology, 4, Article 100215. https://doi.org/10.1016/j.clet.2021.100215
Mulapeer, E. M., & Omar, A. H. (2025). Durability and mechanical performance of geopolymer mortar with partial replacement of fly ash by rice husk ash and variations in alkaline activator concentrations. Discover Civil Engineering, 2(1), Article 82. https://doi.org/10.1007/s44290-025-00234-8
Nandiyanto, A. B. D., H. N. P., Ragadhita, E., & Soegoto, S. W. (2022). Cost analysis and economic evaluation for TiO2 synthesis using Sol-Gel method. Moroccan Journal of Chemistry.
Nguyen, K. D., Thu, T. T., Tran, A. T. H., Le, O. T. K., Sagadevan, S., & Mohd Kaus, N. H. (2023). Effect of red mud and rice husk ash-based geopolymer composites on the adsorption of methylene blue dye in aqueous solution for wastewater treatment. ACS Omega, 8(44), 41258–41272. https://doi.org/10.1021/acsomega.3c04691
Nie, S., Zhou, J., Yang, F., Lan, M., Li, J., Zhang, Z., Chen, Z., Xu, M., Li, H., & Sanjayan, J. G. (2022). Analysis of theoretical carbon dioxide emissions from cement production: Methodology and application. Journal of Cleaner Production, 334, Article 130270. https://doi.org/10.1016/j.jclepro.2021.130270
Nuaklong, P., Jongvivatsakul, P., Pothisiri, T., Sata, V., & Chindaprasirt, P. (2020). Influence of rice husk ash on mechanical properties and fire resistance of recycled aggregate high-calcium fly ash geopolymer concrete. Journal of Cleaner Production, 252, Article 119797. https://doi.org/10.1016/j.jclepro.2019.119797
Oualit, M., & Irekti, A. (2022). Mechanical performance of metakaolin-based geopolymer mortar blended with multi-walled carbon nanotubes. Ceramics International, 48(11), 16188–16195. https://doi.org/10.1016/j.ceramint.2022.02.166
Peng, H.-I., Krauss, T. D., & Miller, B. L. (2010). Aging induced Ag nanoparticle rearrangement under ambient atmosphere and consequences for nanoparticle-enhanced dna biosensing. Analytical Chemistry, 82(20), 8664–8670. https://doi.org/10.1021/ac101919h
Ping, K. K. L., Cheah, C. B., Liew, J. J., Siddique, R., Tangchirapat, W., & Megat Johari, M. A. B. (2022). Coal bottom ash as constituent binder and aggregate replacement in cementitious and geopolymer composites: A review. Journal of Building Engineering, 52, Article 104369. https://doi.org/10.1016/j.jobe.2022.104369
Prochon, P., Zhao, Z., Courard, L., Piotrowski, T., Michel, F., & Garbacz, A. (2020). influence of activators on mechanical properties of modified fly ash based geopolymer mortars. Materials, 13(5), Article 1033. https://doi.org/10.3390/ma13051033
Provis, J. L. (2014). Geopolymers and other alkali activated materials: why, how, and what?. Materials and Structures, 47(1), 11–25. https://doi.org/10.1617/s11527-013-0211-5
Qin, R., Zhou, A., Yu, Z., Wang, Q., & Lau, D. (2021). Role of carbon nanotube in reinforcing cementitious materials: An experimental and coarse-grained molecular dynamics study. Cement and Concrete Research, 147, Article 106517. https://doi.org/10.1016/j.cemconres.2021.106517
Rahmawati, C., Aprilia, S., Saidi, T., Aulia, T. B., & Hadi, A. E. (2021). The effects of nanosilica on mechanical properties and fracture toughness of geopolymer cement. Polymers, 13(13), Article 2178. https://doi.org/10.3390/polym13132178
Rani J. J., & Gladston, H. (2024). Study on durability of fly ash geo-polymer concrete with nano alumina. Matéria (Rio de Janeiro), 29(4). https://doi.org/10.1590/1517-7076-rmat-2024-0412
Ranjan, M., Kumar, S., & Sinha, S. (2024). Nanosilica’s influence on concrete hydration, microstructure, and durability: A review. Journal of Applied Engineering Sciences, 14(2), 322–335. https://doi.org/10.2478/jaes-2024-0040
Rao, B. N. M., Durga, C. S. S., Venkatesh, C., & Rao, T. M. (2024). Sustainable geopolymer concrete for pavements: Performance evaluation of recycled concrete aggregates in fly ash-based mixtures. Journal of Sustainable Construction Materials and Technologies, 9(3), 211–220. https://doi.org/10.47481/jscmt.1554284
Ravitheja, A., & Kumar, N. L. N. K. (2019). A study on the effect of nano clay and GGBS on the strength properties of fly ash based geopolymers. Materials Today: Proceedings, 19, 273–276. https://doi.org/10.1016/j.matpr.2019.06.761
Raza, A., Azab, M., Baki, Z. A., El Hachem, C., El Ouni, M. H., & Kahla, N. B. (2023). Experimental study on mechanical, toughness and microstructural characteristics of micro-carbon fibre-reinforced geopolymer having nano TiO2. Alexandria Engineering Journal, 64, 451–463. https://doi.org/10.1016/j.aej.2022.09.001
Reddy, A. K. N., & Ramujee, K. (2022). Comparative study on mechanical properties of fly ash & GGBFS based geopolymer concrete and OPC concrete using nano-alumina. Materials Today: Proceedings, 60, 399–404. https://doi.org/10.1016/j.matpr.2022.01.260
Rezaei Lori, A., & Mehrali, M. (2024). Mechanical properties and crack deflection mechanisms in 3D-Printed porous geopolymers with cellular structures. Virtual and Physical Prototyping, 19(1), Article e2425824. https://doi.org/10.1080/17452759.2024.2425824
Saleem, H., Zaidi, S. J., & Alnuaimi, N. A. (2021). Recent advancements in the nanomaterial application in concrete and its ecological impact. Materials, 14(21), Article 6387. https://doi.org/10.3390/ma14216387
Samuvel Raj, R., Prince Arulraj, G., Anand, N., Kanagaraj, B., Lubloy, E., & Naser, M. Z. (2023). Nanomaterials in geopolymer composites: A review. Developments in the Built Environment, 13, Article 100114. https://doi.org/10.1016/j.dibe.2022.100114
Sarde, B., Patil, Y. D., Dholakiya, B., & Pawar, V. (2024). Effect of red mud and palm oil fuel ash as cement replacement on the properties of PET resin-modified MMA polymer concrete at elevated temperatures. Journal of Materials in Civil Engineering, 36(1), Article 04023488. https://doi.org/10.1061/JMCEE7.MTENG-15682
Sekkal, W., & Zaoui, A. (2022). High strength metakaolin-based geopolymer reinforced by pristine and covalent functionalized carbon nanotubes. Construction and Building Materials, 327, Article 126910. https://doi.org/10.1016/j.conbuildmat.2022.126910
Shahmansouri, A. A., Akbarzadeh Bengar, H., & Ghanbari, S. (2020). Compressive strength prediction of eco-efficient GGBS-based geopolymer concrete using GEP method. Journal of Building Engineering, 31, Article 101326. https://doi.org/10.1016/j.jobe.2020.101326
Shaikh, F. U. A., & Hosan, A. (2019). Effect of nano silica on compressive strength and microstructures of high volume blast furnace slag and high volume blast furnace slag-fly ash blended pastes. Sustainable Materials and Technologies, 20, Article e00111. https://doi.org/10.1016/j.susmat.2019.e00111
Shamsah, M. A. A. (2023). Development of high strength ambient cured fly ash geopolymer concrete using low NaOH molarity [PhD thesis]. Swinburne University of Technology, Melbourne, Australia. https://doi.org/10.25916/sut.26369386.v1
Shi, C., Roy, D., & Krivenko, P. (2006). Alkali-activated cements and concretes. Taylor & Francis. https://doi.org/10.4324/9780203390672
Shilar, F. A., Ganachari, S. V., Patil, V. B., Khan, T. M. Y., Almakayeel, N. M., & Alghamdi, S. (2022). Review on the relationship between nano modifications of geopolymer concrete and their structural characteristics. Polymers, 14(7), Article 1421. https://doi.org/10.3390/polym14071421
Shvedova, A. A., Yanamala, N., Kisin, E. R., Tkach, A. V., Murray, A. R., Hubbs, A., Chirila, M. M., Keohavong, P., Sycheva, L. P., Kagan, V. E., & Castranova, V. (2014). Long-term effects of carbon containing engineered nanomaterials and asbestos in the lung: One year postexposure comparisons. American Journal of Physiology-Lung Cellular and Molecular Physiology, 306(2), L170–L182. https://doi.org/10.1152/ajplung.00167.2013
Sikora, P., Abd Elrahman, M., & Stephan, D. (2018). The influence of nanomaterials on the thermal resistance of cement-based composites—a review. Nanomaterials, 8(7), Article 465. https://doi.org/10.3390/nano8070465
Singh, S., Aswath, M. U., & Ranganath, R. V. (2018). Effect of mechanical activation of red mud on the strength of geopolymer binder. Construction and Building Materials, 177, 91–101. https://doi.org/10.1016/j.conbuildmat.2018.05.096
Singh, D., Marrocco, A., Wohlleben, W., Park, H.-R., Diwadkar, A. R., Himes, B. E., Lu, Q., Christiani, D. C., & Demokritou, P. (2022a). Release of particulate matter from nano-enabled building materials (NEBMs) across their lifecycle: Potential occupational health and safety implications. Journal of Hazardous Materials, 422, Article 126771. https://doi.org/10.1016/j.jhazmat.2021.126771
Singh, N., Haque, M. M., & Gupta, A. (2022b). Reviewing mechanical performance of geopolymer concrete containing coal bottom ash. Materials Today: Proceedings, 65, 1449–1458. https://doi.org/10.1016/j.matpr.2022.04.408
Sivasakthi, M., Jeyalakshmi, R., & Rajamane, N. P. (2021). Investigation of microstructure and thermomechanical properties of Nano-TiO2 admixed geopolymer for thermal resistance applications. Journal of Materials Engineering and Performance, 30(5), 3642–3653. https://doi.org/10.1007/s11665-021-05708-1
Somna, R., Saowapun, T., Somna, K., & Chindaprasirt, P. (2022). Rice husk ash and fly ash geopolymer hollow block based on NaOH activated. Case Studies in Construction Materials, 16, Article e01092. https://doi.org/10.1016/j.cscm.2022.e01092
Sotelo-Piña, C., Aguilera-González, E. N., & Martínez-Luévanos, A. (2019). Geopolymers: Past, present and future of low carbon footprint eco-materials. In L. M. T. Martínez, O. V. Kharissova, & B. I. Kharisov (Eds.), Handbook of ecomaterials (pp. 2765–2785). Springer International Publishing. https://doi.org/10.1007/978-3-319-68255-6_54
Suet, D. (2024). Nanomaterials in construction: Building the future. Journal of Nanosciences: Current Research, 9(3).
Sujjavanich, S., Suwanvitaya, P., Chaysuwan, D., & Heness, G. (2017). Synergistic effect of metakaolin and fly ash on properties of concrete. Construction and Building Materials, 155, 830–837. https://doi.org/10.1016/j.conbuildmat.2017.08.072
Syamsidar, D., Nurfadilla, & Subaer. (2017). The properties of nano TiO2- geopolymer composite as a material for functional surface application. MATEC Web Conferences, 97, Article 01013. https://doi.org/10.1051/matecconf/20179701013
Tang, Z. Q., de Souza, F. B., Mulder, R. J., KwesiSagoe, C., & Duan, W. (2022). Multistep nucleation and growth mechanism of aluminosilicate gel observed by cryo-electron microscopy. Cement and Concrete Research, 159, Article 106873. https://doi.org/10.1016/j.cemconres.2022.106873
Tang, Z. Q., Sui, H., de Souza, F. B., Sagoe-Crentsil, K., & Duan, W. (2023). Silane-modified graphene oxide in geopolymer: Reaction kinetics, microstructure, and mechanical performance. Cement and Concrete Composites, 139, Article 104997. https://doi.org/10.1016/j.cemconcomp.2023.104997
Tanu, H. M., & Unnikrishnan, S. (2023). Mechanical strength and microstructure of GGBS-SCBA based geopolymer concrete. Journal of Materials Research and Technology, 24, 7816–7831. https://doi.org/10.1016/j.jmrt.2023.05.051
Tayeh, B. A., Akeed, M. H., Qaidi, S., & Bakar, B. H. A. (2022). Influence of microsilica and polypropylene fibers on the fresh and mechanical properties of ultra-high performance geopolymer concrete (UHP-GPC). Case Studies in Construction Materials, 17, Article e01367. https://doi.org/10.1016/j.cscm.2022.e01367
Teizer, J., Venugopal, M., Teizer, W., & Felkl, J. (2012). Nanotechnology and its impact on construction: bridging the gap between researchers and industry professionals. Journal of Construction Engineering and Management, 138(5), 594–604. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000467
Temizer, H., & Çavdar, Ö. (2025). Microstructural investigation of geopolymer composites obtained from recyclable waste materials. European Mechanical Science, 9(2), 196–206. https://doi.org/10.26701/ems.1695691
Tuntachon, S., Kamwilaisak, K., Somdee, T., Mongkoltanaruk, W., Sata, V., Boonserm, K., Wongsa, A., & Chindaprasirt, P. (2019). Resistance to algae and fungi formation of high calcium fly ash geopolymer paste containing TiO2. Journal of Building Engineering, 25, Article 100817. https://doi.org/10.1016/j.jobe.2019.100817
Utomo, A., Alderman, N. J., Padron, G. A., & Özcan-Taşkın, N. G. (2023). Effects of particle concentration and dispersion rheology on the breakup of nanoparticle clusters through ultrasonication. Chemical Engineering Research and Design, 191, 301–312. https://doi.org/https://doi.org/10.1016/j.cherd.2023.01.041
Valente, M., Sambucci, M., & Sibai, A. (2021). Geopolymers vs. cement matrix materials: how nanofiller can help a sustainability approach for smart construction applications—a review. Nanomaterials, 11(8), Article 2007. https://doi.org/10.3390/nano11082007
Valenzuela, M., Tuninetti, V., Ciudad, G., Miranda, A., & Oñate, A. (2025). Designing sustainable cement free compositions with rice husk ash to improve mechanical performance in next generation ecoblocks. Scientific Reports, 15(1), Article 14920. https://doi.org/10.1038/s41598-025-97963-8
van Jaarsveld, J. G. S., van Deventer, J. S. J., & Lukey, G. C. (2002). The effect of composition and temperature on the properties of fly ash- and kaolinite-based geopolymers. Chemical Engineering Journal, 89(1), 63–73. https://doi.org/10.1016/S1385-8947(02)00025-6
Verma, P., Goldar, D., Singh, S., & Daniyal, M. (2024). Effect of rice husk ash on the properties and performance of geopolymer concrete. International Journal of Civil Engineering, 11, 11–22. https://doi.org/10.14445/23488352/IJCE-V11I11P102
Viola, V., Allah, P., Perumal, P., & Catauro, M. (2024). Alkali activation of metakaolin and wollastonite: reducing sodium hydroxide use and enhancing gel formation through carbonation. Materials, 17(19), Article 4910. https://doi.org/10.3390/ma17194910
Vishnu, N., Kolli, R., & Ravella, D. P. (2021). Studies on self-compacting geopolymer concrete containing flyash, GGBS, wollastonite and graphene oxide. Materials Today: Proceedings, 43, 2422–2427. https://doi.org/10.1016/j.matpr.2021.02.142
Wallah, S., & Rangan, B. (2006). Low-calcium fly ash-based geopolymer concrete: Long term properties (Research Report GC 2). Curtin University of Technology, Perth, Australia.
Wang, K., & Zha, X. (2020). Effect of nano-TiO2 content on the flexural strength and compressive strength of dry-Mixing CDG-Slag based geopolymer paste. IOP Conference Series: Materials Science and Engineering, 720(1), Article 012002. https://doi.org/10.1088/1757-899X/720/1/012002
Wang, J., Zhou, T., Xu, D., Zhou, Z., Du, P., Xie, N., Cheng, X., & Liu, Y. (2018). Effect of nano-silica on the efflorescence of waste based alkali-activated inorganic binder. Construction and Building Materials, 167, 381–390. https://doi.org/10.1016/j.conbuildmat.2018.02.006
Wang, Y., Liu, X., Zhang, W., Li, Z., Zhang, Y., Li, Y., & Ren, Y. (2020). Effects of Si/Al ratio on the efflorescence and properties of fly ash based geopolymer. Journal of Cleaner Production, 244, Article 118852. https://doi.org/10.1016/j.jclepro.2019.118852
Wang, Y., Zhang, N., Zhang, S., Wang, Y., Xia, R., & Zhang, Y. (2024). A novel self-cleaning ceramic waste-slag geopolymer with nano-SiO2-TiO2 photocatalytic coating. Ceramics International, 50(10), 17135–17144. https://doi.org/10.1016/j.ceramint.2024.02.190
Wattimena, O. K., Antoni, & Hardjito, D. (2017). A review on the effect of fly ash characteristics and their variations on the synthesis of fly ash based geopolymer. AIP Conference Proceedings, 1887(1), Article 020041. https://doi.org/10.1063/1.5003524
West, G. H., Lippy, B. E., Cooper, M. R., Marsick, D., Burrelli, L. G., Griffin, K. N., & Segrave, A. M. (2016). Toward responsible development and effective risk management of nano-enabled products in the U.S. construction industry. Journal of Nanoparticle Research, 18(2), Article 49. https://doi.org/10.1007/s11051-016-3352-y
Xavier, C. S. B., & Rahim, A. (2022). Nano aluminium oxide geopolymer concrete: An experimental study. Materials Today: Proceedings, 56, 1643–1647. https://doi.org/https://doi.org/10.1016/j.matpr.2021.10.070
Xiao, L., Zhang, C., Zhang, H., & Jiang, Z. (2024). Internal curing effects of slag on properties and microstructure of ambient-cured fly ash-based geopolymer mortar. Buildings, 14(12), Article 3846. https://doi.org/10.3390/buildings14123846
Xie, J., Wang, J., Rao, R., Wang, C., & Fang, C. (2019). Effects of combined usage of GGBS and fly ash on workability and mechanical properties of alkali activated geopolymer concrete with recycled aggregate. Composites Part B: Engineering, 164, 179–190. https://doi.org/10.1016/j.compositesb.2018.11.067
Xiong, Y., Zhu, Y., Chen, C., & Zhang, Y. (2021). Effect of nano-alumina modified foaming agents on properties of foamed concrete. Construction and Building Materials, 267, Article 121045. https://doi.org/10.1016/j.conbuildmat.2020.121045
Xu, Z., Huang, Z., Liu, C., Deng, H., Deng, X., Hui, D., Zhang, X., & Bai, Z. (2021). Research progress on key problems of nanomaterials-modified geopolymer concrete. Nanotechnology Reviews, 10(1), 779–792. https://doi.org/10.1515/ntrev-2021-0056
Xu, Y., Guo, P., & Akono, A. T. (2022). Novel wet electrospinning inside a reactive pre-ceramic gel to yield advanced nanofiber-reinforced geopolymer composites. Polymers, 14(19), Article 3943. https://doi.org/10.3390/polym14193943
Yan, S., He, P., Jia, D., Yang, Z., Duan, X., Wang, S., & Zhou, Y. (2016). Effect of reduced graphene oxide content on the microstructure and mechanical properties of graphene–geopolymer nanocomposites. Ceramics International, 42(1, Part A), 752–758. https://doi.org/10.1016/j.ceramint.2015.08.176
Yang, Z., Li, F., Li, W., Chen, D., & Li, S. (2021). Effect of Carbon Nanotubes on Porosity and Mechanical Properties of Slag-Based Geopolymer. Arabian Journal for Science and Engineering, 46(11), 10731–10738. https://doi.org/10.1007/s13369-021-05555-1
Yang, Z., Liu, Z., Li, F., Lu, Y., & Li, S. (2023). Effect of multi-walled carbon nanotubes on durability of high-strength slag-based geopolymer. Ceramics International, 49(8), 11936–11949. https://doi.org/10.1016/j.ceramint.2022.12.042
Yashwanth Reddy, M., & Harihanandh, M. (2023). Experimental studies on strength and durability of alkali activated slag and coal bottom ash based geopolymer concrete. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.03.644
Ye, N., Yang, J., Liang, S., Hu, Y., Hu, J., Xiao, B., & Huang, Q. (2016). Synthesis and strength optimization of one-part geopolymer based on red mud. Construction and Building Materials, 111, 317–325. https://doi.org/10.1016/j.conbuildmat.2016.02.099
Yi, C., Boluk, Y., & Bindiganavile, V. (2024). Preparation of geopolymers with nanosilica and water-in-air pickering emulsion: mechanisms underlying its rheology, polymerization, and strength. Langmuir, 40(22), 11436–11449. https://doi.org/10.1021/acs.langmuir.4c00287
Yılmaz, A., Ergün, S., Uysal, M., Dilbas, H., Aygörmez, Y., & Canpolat, O. (2023). Durability performance of fiber-reinforced metakaolin-based and red mud-fly ash-slag-activated geopolymers with recycled aggregates. Arabian Journal for Science and Engineering, 48(10), 13967–13986. https://doi.org/10.1007/s13369-023-08033-y
Yılmazer Polat, B. (2023). The influence of microwave curing on the strength of silica fume-added fly ash-based geopolymer mortars. Journal of Sustainable Construction Materials and Technologies, 8(3), 207–215. https://doi.org/10.47481/jscmt.1315096
Yuan, L., Ma, Y., Zhang, J., Men, J., Sun, T., Zhao, H., Wu, H., Wang, H., & Dai, S. (2022). Orthogonal analysis and mechanism of compressive strength and microstructure of the metakaolin-fly ash geopolymer. Case Studies in Construction Materials, 17, Article e01154. https://doi.org/10.1016/j.cscm.2022.e01154
Zaid, O., Abdulwahid Hamah Sor, N., Martínez-García, R., de Prado-Gil, J., Mohamed Elhadi, K., & Yosri, A. M. (2024). Sustainability evaluation, engineering properties and challenges relevant to geopolymer concrete modified with different nanomaterials: A systematic review. Ain Shams Engineering Journal, 15(2), Article 102373. https://doi.org/10.1016/j.asej.2023.102373
Zawrah, M. F., Abo Sawan, S. E., Ngida, R. E. A., & El-Kheshen, A. A. (2025). Effect of TiO2 nanofiber content on compressive strength of geopolymers fabricated from waste clay. Journal of Materials Engineering and Performance, 34(9), 7693–7701. https://doi.org/10.1007/s11665-024-09695-x
Zeyad, A. M., Bayagoob, K. H., Amin, M., Mostafa, S. A., & Agwa, I. S. (2024). Influence of nanomaterials on properties and durability of ultra-high-performance geopolymer concrete. Reviews on Advanced Materials Science, 63(1), Article20240071. https://doi.org/doi:10.1515/rams-2024-0071
Zhang, H. Y., Kodur, V., Qi, S. L., Cao, L., & Wu, B. (2014). Development of metakaolin–fly ash based geopolymers for fire resistance applications. Construction and Building Materials, 55, 38–45. https://doi.org/10.1016/j.conbuildmat.2014.01.040
Zhang, P., Wang, K., Wang, J., Guo, J., & Ling, Y. (2021). Macroscopic and microscopic analyses on mechanical performance of metakaolin/fly ash based geopolymer mortar. Journal of Cleaner Production, 294, Article 126193. https://doi.org/10.1016/j.jclepro.2021.126193
Zhang, P., Han, X., Hu, S., Wang, J., & Wang, T. (2022a). High-temperature behavior of polyvinyl alcohol fiber-reinforced metakaolin/fly ash-based geopolymer mortar. Composites Part B: Engineering, 244, Article 110171. https://doi.org/10.1016/j.compositesb.2022.110171
Zhang, P., Wei, S., Zheng, Y., Wang, F., & Hu, S. (2022b). Effect of single and synergistic reinforcement of pva fiber and nano-sio2 on workability and compressive strength of geopolymer composites. Polymers, 14(18), Article 3765. https://doi.org/10.3390/polym14183765
Zhang, Q., Huang, D., Zhang, X., Lin, L., Wang, Z., Tang, W., & Qiang, X. (2023). Improving the properties of metakaolin/fly ash composite geopolymers with ultrafine fly ash ground by steam-jet mill. Construction and Building Materials, 387, Article 131673. https://doi.org/10.1016/j.conbuildmat.2023.131673
Zhang, Y., Zhou, C., Song, J., Li, J., & Gong, Y. (2024). Foundry waste reutilization: Anti-shrinkage geopolymer based on nano-clay and coal gangue. Construction and Building Materials, 434, Article 136710. https://doi.org/10.1016/j.conbuildmat.2024.136710
Zheng, C., Wang, J., Liu, H., GangaRao, H., & Liang, R. (2022). Characteristics and microstructures of the GFRP waste powder/GGBS-based geopolymer paste and concrete. Reviews on Advanced Materials Science 61(1), 117–137. https://doi.org/10.1515/rams-2022-0005
Zhong, W., Wu, C., Ai, L., Wang, L., & Zhu, D. (2024). Effects of modified multi-walled carbon nanotubes and PVA fibers on mechanical properties and microstructure of lithium slag base geopolymer. Construction and Building Materials, 438, Article 137237. https://doi.org/10.1016/j.conbuildmat.2024.137237
Zhu, Y., Bai, B., Ding, E., Bi, S., Liu, W., & Zhang, L. (2022). Enhanced electromagnetic interference shielding performance of geopolymer nanocomposites by incorporating carbon nanotubes with controllable silica shell. Ceramics International, 48(8), 11103–11110. https://doi.org/https://doi.org/10.1016/j.ceramint.2021.12.330
Zhuang, X. Y., Chen, L., Komarneni, S., Zhou, C. H., Tong, D. S., Yang, H. M., Yu, W. H., & Wang, H. (2016). Fly ash-based geopolymer: clean production, properties and applications. Journal of Cleaner Production, 125, 253–267. https://doi.org/10.1016/j.jclepro.2016.03.019
Ziada, M. (2024). The effect of Nano-TiO2 and Nano-Al2O3 on mechanical, microstructure properties and high-temperature resistance of geopolymer mortars. Arabian Journal for Science and Engineering, 50, 12977–12996. https://doi.org/10.1007/s13369-024-09570-w
Zidi, Z., Ltifi, M., Ben Ayadi, Z., & El Mir, L. (2019). Synthesis of nano-alumina and their effect on structure, mechanical and thermal properties of geopolymer. Journal of Asian Ceramic Societies, 7(4), 524–535. https://doi.org/10.1080/21870764.2019.1676498
Zidi, Z., Ltifi, M., & Zafar, I. (2020). Characterization of nano-silica local metakaolin based-geopolymer: microstructure and mechanical properties. Open Journal of Civil Engineering, 10, 143–161. https://doi.org/10.4236/ojce.2020.102013
Zidi, Z., Ltifi, M., & Zafar, I. (2021). Comparative study: nanosilica, nanoalumina, and nanozinc oxide addition on the properties of localized geopolymer. Journal of the Australian Ceramic Society, 57(3), 783–792. https://doi.org/10.1007/s41779-021-00576-3
View article in other formats
CrossMark check
Published
Issue
Section
Copyright
Copyright (c) 2026 The Author(s). Published by Vilnius Gediminas Technical University.
License
This work is licensed under a Creative Commons Attribution 4.0 International License.