A systematic review on safety practices in high-rise building construction: benefits, barriers, and strategic improvements
DOI: https://doi.org/10.3846/jcem.2025.24790Abstract
High-rise building construction has long been considered one of the most dangerous jobs globally. However, there is currently a lack of comprehensive systematic reviews that approach the implementation of safety practices in high-rise construction. This study aims to fill the following research gaps: first, to understand the significance and identify the barriers faced to implementing safety practices in high-rise construction; second, to propose a framework to improve safety performance. A total of 109 articles from databases were thoroughly reviewed in this study.
The research identified six categories of benefits, five types of safety barriers, and 15 strategies proposed to overcome these barriers. In terms of the number of sources, “reduced accident rates” and “improved organizational reputation” were identified as the top benefits in terms of the significance of safety practices. “Lack of health and safety training” was deemed the largest barrier. To address these challenges, this paper explores the strategies and risk mitigation measures from the perspectives of six stakeholders: regulatory agencies, government, owners, contractors, consultants, and workers. The findings suggest that establishing strict market entry mechanisms are fundamental while strengthening worker safety training and conducting regular safety inspections and real-time site monitoring are the most effective methods.
Keywords:
high-rise building, benefits, barriers, construction safety practice, stakeholders, strategiesHow to Cite
Share
License
Copyright (c) 2025 The Author(s). Published by Vilnius Gediminas Technical University.
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Abd Razak, M. I., Khoiry, M. A., Wan Badaruzzaman, W. H., & Hussain, A. H. (2022). DfMA for a better-industrialized building system. Buildings, 12(6), Article 794. https://doi.org/10.3390/buildings12060794
Abd Razak, M. I., Khoiry, M. A., Badaruzzaman, W. H. W., Hussain, A. H., & Zain, M. Z. M. (2023). Pembangunan kerangka pelaksanaan prinsip rekabentuk untuk pembuatan dan pemasangan ke arah pembinaan secara digital dan mampan di Malaysia. Jurnal Kejuruteraan, 35(2), 351–360. https://doi.org/10.17576/jkukm-2023-35(2)-06
Agbede, J. O., Manu, P., Agbede, O. A., & Mahamadu, A. M. (2016). Health and safety management practices in the Nigerian construction industry: A survey of construction firms in South Western Nigeria. In CIB World Building Congress 2016 (Vol. 2, pp. 293–304), Tampere, Finland.
Ali, H., & Omran, A. (2016). Strategies for improving the safety performance of construction contractors. Annals of Faculty Engineering Hunedoara – International Journal of Engineering, 14, 109–113.
Alnunu, M. Z., & Maliha, M. R. (2015). Evaluation of factors affecting on safety performance at high workplace in Gaza Strip 2014. Journal of Civil and Environmental Engineering, 5(1), Article e167. https://doi.org/10.4172/2165-784X.1000167
Aminbakhsh, S., Gunduz, M., & Sonmez, R. (2013). Safety risk assessment using analytic hierarchy process (AHP) during planning and budgeting of construction projects. Journal of Safety Research, 46, 99–105. https://doi.org/10.1016/j.jsr.2013.05.003
Andi, A. (2008). Construction workers’ perceptions toward safety culture. Civil Engineering Dimension, 10(1), 1–6.
Arifin, K., Ahmad, M. A., Abas, A., & Mansor Ali, M. X. (2023). Systematic literature review: Characteristics of confined space hazards in the construction sector. Results in Engineering, 18, Article 101188. https://doi.org/10.1016/j.rineng.2023.101188
Awwad, R., El Souki, O., & Jabbour, M. (2016). Construction safety practices and challenges in a Middle Eastern developing country. Safety Science, 83, 1–11. https://doi.org/10.1016/j.ssci.2015.10.016
Belayutham, S., & Ibrahim, C. K. I. C. (2019). Barriers and strategies for better safety practices: The case of construction SMEs in Malaysia. Construction Economics and Building, 19(1), Article 6331. https://doi.org/10.5130/AJCEB.v19i1.6331
Buniya, M. K., Othman, I., Sunindijo, R. Y., Kineber, A. F., Mussi, E., & Ahmad, H. (2021). Barriers to safety program implementation in the construction industry. Ain Shams Engineering Journal, 12, 65–72. https://doi.org/10.1016/j.asej.2020.08.002
Cai, H., Andoh, A. R., Su, X., & Li, S. (2014). A boundary condition-based algorithm for locating construction site objects using RFID and GPS. Advanced Engineering Informatics, 28, 455–468. https://doi.org/10.1016/j.aei.2014.07.002
Chan, D. W., Chan, A. P., & Choi, T. N. (2010). An empirical survey of the benefits of implementing pay for safety scheme (PFSS) in the Hong Kong construction industry. Journal of Safety Research, 41, 433–443. https://doi.org/10.1016/j.jsr.2010.07.001
Charehzehi, A., & Ahankoob, A. (2012). Enhancement of safety performance at construction site. International Journal of Advanced Engineering Technology, 5(1), 303–313.
Cheah, C. Y. (2007). Construction safety and health factors at the industry level: The case of Singapore. Journal of Construction in Developing Countries, 12, 81–99.
Chiocha, C., Smallwood, J., & Emuze, F. (2011). Health and safety in the Malawian construction industry. Acta Structilia, 18, 68–80. https://doi.org/10.38140/as.v18i1.112
Choudhry, R. M., & Fang, D. (2008). Why operatives engage in unsafe work behavior: Investigating factors on construction sites. Safety Science, 46, 566–584. https://doi.org/10.1016/j.ssci.2007.06.027
Construction Safety Council of the UK. (n.d.). SME safety management report.
Cooney, J. P. (2016). Health and safety in the construction industry: A review of procurement, monitoring, cost effectiveness and strategy [Doctoral dissertation]. University of Salford, UK.
Diugwu, I. A., Dorothy, B., & Egila, A. E. (2012). Effective regulation and level of awareness: An exposé of Nigeria’s construction industry. Open Journal of Safety Science and Technology, 2, 140–146. https://doi.org/10.4236/ojsst.2012.24018
Durdyev, S., Mohamed, S., Lay, M. L., & Ismail, S. (2017). Key factors affecting construction safety performance in developing countries: Evidence from Cambodia. Australasian Journal of Construction Economics and Building, 17(4), 48–65. https://doi.org/10.5130/AJCEB.v17i4.5596
Enshassi, A., Mayer, P. E., Mohamed, S., & El-Masri, F. (2007). Perception of construction managers towards safety in Palestine. International Journal of Construction Management, 7(2), 41–51. https://doi.org/10.1080/15623599.2007.10773101
Fernández-Muñiz, B., Montes-Peón, J. M., & Vázquez-Ordás, C. J. (2007). Safety management system: Development and validation of a multidimensional scale. Journal of Loss Prevention in the Process Industries, 20, 52–68. https://doi.org/10.1016/j.jlp.2006.10.002
Fernández-Muñiz, B., Montes-Peón, J. M., & Vázquez-Ordás, C. J. (2009). Relation between occupational safety management and firm performance. Safety Science, 47, 980–991. https://doi.org/10.1016/j.ssci.2008.10.022
Garnica, G. B., & Barriga, G. D. C. (2018). Barriers to occupational health and safety management in small Brazilian enterprises. Production, 28, Article e20170046. https://doi.org/10.1590/0103-6513.20170046
Ghahramani, A. (2017). Diagnosis of poor safety culture as a major shortcoming in occupational health and safety AS 18001-certified companies. Industrial Health, 55, 138–148. https://doi.org/10.2486/indhealth.2015-0205
Gill, J. R., & Clark, C. E. (2024). Falls from height; physical findings – Adult. In Encyclopedia of forensic and legal medicine (3rd ed.) (pp. 499–506). Elsevier. https://doi.org/10.1016/B978-0-443-21441-7.00080-7
Goh, Y. M., & Chua, D. (2013). Neural network analysis of construction safety management systems: A case study in Singapore. Construction Management and Economics, 31, 460–470. https://doi.org/10.1080/01446193.2013.797095
Gómez-de-Gabriel, J. M., Fernández-Madrigal, J. A., López-Arquillos, A., & Rubio-Romero, J. C. (2019). Monitoring harness use in construction with BLE beacons. Measurement, 131, 329–340. https://doi.org/10.1016/j.measurement.2018.08.032
Guo, B. H., Yiu, T. W., & González, V. A. (2016). Predicting safety behavior in the construction industry: Development and test of an integrative model. Safety Science, 84, 1–11. https://doi.org/10.1016/j.ssci.2015.11.020
Hallowell, M. R., Hinze, J. W., Baud, K. C., & Wehle, A. (2013). Proactive construction safety control: Measuring, monitoring, and responding to safety leading indicators. Journal of Construction Engineering and Management, 139(10), Article 04013010. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000730
Hamid, A. R. A., Majid, M. Z. A., & Singh, B. (2008). Causes of accidents at construction sites. Malaysian Journal of Civil Engineering, 20, 242–259.
Hatema, Z. M., Kassemc, M. A., Alic, K. N., & Khoiryd, M. A. (2022). A new perspective on the relationship between the construction industry performance and the economy outcome – A literature review. Jurnal Kejuruteraan, 34(2), 191–200. https://doi.org/10.17576/jkukm-2022-34(2)-02
Ju, C., & Rowlinson, S. (2014). Institutional determinants of construction safety management strategies of contractors in Hong Kong. Construction Management and Economics, 32(7–8), 725–736. https://doi.org/10.1080/01446193.2014.909048
Kadiri, Z. O., Nden, T., Avre, G. K., Oladipo, T. O., Edom, A., Samuel, P. O., & Ananso, G. N. (2014). Causes and effects of accidents on construction sites: A case study of some selected construction firms in Abuja, FCT Nigeria. IOSR Journal of Mechanical and Civil Engineering, 11, 66–72. https://doi.org/10.9790/1684-11516672
Kamoli, A., Hamid, R. A., & Mahmud, S. H. B. (2021, September 25). Benefits of the application of occupational health and safety management system. In Proceedings of the 2nd International Professional Doctorate and Postgraduate Symposium, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia.
Keng, T. C., & Razak, N. A. (2014). Case studies on the safety management at construction site. Journal of Sustainable Science and Management, 9, 90–108.
Khoiry, M. A., Razak, M. I. A., Kamaruzzaman, S. N., & Abdullah, A. (2017). Kebolehpercayaan & kesahan soal selidik kelewatan dalam projek pembinaan menggunakan model pengukuran Rasch. Jurnal Kejuruteraan, 29(1), 13–21. https://doi.org/10.17576/jkukm-2017-29(1)-03
Kineber, A. F., Antwi-Afari, M. F., Elghaish, F., et al. (2023). Benefits of implementing occupational health and safety management systems for the sustainable construction industry: A systematic literature review. Sustainability, 15(17), Article 12697. https://doi.org/10.3390/su151712697
Labor Department. (2024). Code of practice on safety management. http://www.labour.gov.hk/eng/public/os/manage.pdf
Lakhiar, M. T. (2021). Occupational health and safety performance in high-rise building projects in Pakistan: A systematic literature review. Operational Research in Engineering Sciences: Theory and Applications, 4(1), 99–114. https://doi.org/10.31181/oresta2040199l
Lendlease. (2017). Safety performance and efficiency in construction.
López-Arquillos, A., Rubio-Romero, J. C., Carrillo-Castrillo, J., & Suarez-Cebador, M. (2015). Effectiveness of construction safety programme elements. In P. Cortés, E. Maeso-González, & A. Escudero-Santana, A. (Eds.), Lecture notes in management and industrial engineering. Enhancing synergies in a collaborative environment (pp. 285–289). Springer, Cham. https://doi.org/10.1007/978-3-319-14078-0_32
Maano, N. E., & Lindiwe, Z. (2017). Occupational health and safety provision awareness among construction workers on the construction industry of Windhoek, Namibia. International Journal of Health, 5, 60–63. https://doi.org/10.14419/ijh.v5i1.7294
Mahfuth, K., Loulizi, A., Tayeh, B. A., & Alhallaq, K. (2018). Unacceptable forms of work for safety in the construction sector – Palestinian National Authority. International Journal of Civil Engineering, 9(13), 328–341.
Mahfuth, K., Loulizi, A., Al Hallaq, K., & Tayeh, B. A. (2019). Implementation phase safety system for minimizing construction project waste. Buildings, 9, Article 25. https://doi.org/10.3390/buildings9020025
Mahfuth, K., Loulizi, A., Tayeh, B. A., Al Hallaq, K., & Aisheh, Y. I. A. (2020). Using safety system during the design phase to minimize waste in construction projects. Journal of King Saud University – Engineering Sciences, 34(3), 170–179. https://doi.org/10.1016/j.jksues.2020.09.006
Mahmoudi, S., Ghasemi, F., Mohammadfam, I., & Soleimani, E. (2014). Framework for continuous assessment and improvement of occupational health and safety issues in construction companies. Safety and Health at Work, 5(3), 125–130. https://doi.org/10.1016/j.shaw.2014.05.002
Maliha, M. N., Tayeh, B. A., & Abu Aisheh, Y. I. (2020). Building Information Modeling (BIM) in enhancing the applying of knowledge areas in the Architecture, Engineering and Construction (AEC) industry. Open Civil Engineering Journal, 14, 388–401. https://doi.org/10.2174/1874149502014010388
Maliha, M. N., Abu Aisheh, Y. I., Tayeh, B. A., et al. (2021). Safety barriers identification, classification, and ways to improve safety performance in the Architecture, Engineering, and Construction (AEC) industry: Review study. Sustainability, 13(6), Article 3316. https://doi.org/10.3390/su13063316
Manzoor, B., Othman, I., & Waheed, A. (2022). Accidental safety factors and prevention techniques for high-rise building projects – A review. Ain Shams Engineering Journal, 13(5), Article 101723. https://doi.org/10.1016/j.asej.2022.101723
Mashwama, N., Aigbavboa, C., & Thwala, W. (2019). Occupational health and safety challenges among small and medium-sized enterprise contractors in South Africa. In R. Goossens (Ed.), Advances in intelligent systems and computing. Vol. 792: Advances in social and occupational ergonomics. AHFE 2018 (pp. 68–76). Springer, Cham. https://doi.org/10.1007/978-3-319-94000-7_7
Meliá, J. L., & Becerril, M. (2009). Health behaviour and safety in the AEC industry. Psicothema, 21, 427–432.
Ministry of Housing and Urban-Rural Development of the People’s Republic of China. (2021). Construction safety management platform. https://zlaq.mohurd.gov.cn/fwmh/bjxcjgl/fwmh/pages/default/index.html
Ministry of Housing and Urban-Rural Development of the People’s Republic of China. (2022). Notice from the General Office of the Ministry of Housing and Urban-Rural Development on the Production Safety Accidents in Housing and Municipal Engineering in 2020. https://www.mohurd.gov.cn/gongkai/zc/wjk/art/2022/art_17339_768565.html
Ministry of Housing and Urban-Rural Development of the People’s Republic of China. (2023). Statistics on the number of construction accidents and deaths in China.
Mnjula, N. H. C., & De Silva, N. (2014). Factors influencing safety behaviours of construction workers. In Proceedings of the 3rd World Construction Symposium 2014: Sustainability and Development in Built Environment (pp. 256–264), Colombo, Sri Lanka.
Mohamed, S., Ali, T. H., & Tam, W. Y. V. (2009). National culture and safe work behaviour of construction workers in Pakistan. Safety Science, 47, 29–35. https://doi.org/10.1016/j.ssci.2008.01.003
Moorkamp, M., Kramer, E. H., Gulijk, C. V., & Ale, B. (2014). Safety management theory and the expeditionary organization: A critical theoretical reflection. Safety Science, 69, 71–81. https://doi.org/10.1016/j.ssci.2014.03.013
Mouleeswaran, K. (2014). Evaluation of safety performance level of construction firms in and around Erode zone. International Journal of Innovative Research in Science, Engineering and Technology, 3(3), 1586–1594.
Mubashar, M. J., Mufti, N. A., & Amjad, M. (2013). The effects of safety training on safety culture in construction industry. International Journal of Engineering Research & Technology, 2(10), 641–647.
Mullen, J. (2004). Investigating factors that influence individual safety behavior at work. Journal of Safety Research, 35, 275–285. https://doi.org/10.1016/j.jsr.2004.03.011
Murugasamy, M., Sakthivel, M., & Shanmugam, V. (2020). Study on barriers in the implementation of safety management system in construction projects. AIP Conference Proceedings, 2240(1), Article 040002. https://doi.org/10.1063/5.0011085
National Safety Council. (2013). Injury facts.
Nawi, M. N. M., Ibrahim, S. H., Affandi, R., Rosli, N. A., & Basri, F. M. (2017). Factor affecting safety performance construction industry. International Review of Management and Marketing, 6, 280–285.
Nurhendi, R. N., Khoiry, M. A., & Hamzah, N. (2022). Conceptual framework factors affecting construction labour productivity. Jurnal Kejuruteraan, 34(1), 89–99. https://doi.org/10.17576/jkukm-2022-34(1)-08
Oke, A., Aigbavboa, C., & Seemola, M. (2017). Importance of safety guidelines on South African construction sites. In P. Arezes (Ed.), Advances in intelligent systems and computing. Vol. 604: Advances in safety management and human factors. AHFE 2017 (pp. 152–160). Springer, Cham. https://doi.org/10.1007/978-3-319-60525-8_16
Okoye, P. U., Ezeokonkwo, J. U., & Ezeokoli, F. O. (2016). Building construction workers’ health and safety knowledge and compliance onsite. Journal of Safety Engineering, 5(1), 17–26.
Priyadarshani, K., Karunasena, G., & Jayasuriya, S. (2013). Construction safety assessment framework for developing countries: A case study of Sri Lanka. Journal of Construction in Developing Countries, 18, 33–51.
Rafique, M. Z., Haider, M., Raheem, A., Ab Rahman, M. N., & Amjad, M. S. (2022). Essential elements for Radio Frequency Identification (RFID) adoption for Industry 4.0 smart manufacturing in context of Technology-Organization-Environment (TOE) framework – A review. Jurnal Kejuruteraan, 34(1), 1–10. https://doi.org/10.17576/jkukm-2021-34(1)-01
Revathi, K., Ezhilmathi, P., Manoj, K. R., Sivaranjani, M., & Devaki, R. (2017). Safety issues, problems and recommendations to Indian construction industry. International Journal of Innovative Research in Science, Engineering and Technology, 6(3), 2319–8753.
Robson, S. L., Clarke, A. J., Cullen, K., Bielecky, A., Severin, C., Bigelow, L. P., Irvin, E., Culyer, E., & Mahood, Q. (2007). The effectiveness of occupational health and safety management system interventions: A systematic review. Safety Science, 45, 329–353. https://doi.org/10.1016/j.ssci.2006.07.003
Saad, N. M. (2016). The influence of safety culture on safety performance in Saudi Arabian construction industry [PhD thesis]. University of Salford, UK. http://usir.salford.ac.uk/id/eprint/41398/
Saad, S., Alaloul, W. S., Ammad, S., Altaf, M., & Qureshi, A. H. (2022). Identification of critical success factors for the adoption of Industrialized Building System (IBS) in Malaysian construction industry. Ain Shams Engineering Journal, 13, Article 101547. https://doi.org/10.1016/j.asej.2021.10.021
Saeed, Y. S. (2017). Safety management in construction projects. Journal of Duhok University, 20, 546–560. https://doi.org/10.26682/sjuod.2017.20.1.48
Safe Start. (2017). 4 causes of safety culture problems. https://safestart.com/news/4-causes-safety-culture-problems/
Salvador, L. R., & Van Thinh, D. (2016, May). Occupational safety and health: An overview. In 2016 IEEE 11th International Symposium on Applied Computational Intelligence and Informatics (SACI) (pp. 355–360). IEEE. https://doi.org/10.1109/SACI.2016.7507413
Siraj, N. B., & Fayek, A. R. (2019). Risk identification and common risks in construction: Literature review and content analysis. Journal of Construction Engineering and Management, 145(9), Article 03119004. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001685
Skanska. (2021). Sustainability and safety report 2021. https://group.skanska.com
Skanska. (2018). Sustainability report 2018. https://group.skanska.com/4a194c/siteassets/investors/reports-publications/annual-reports/2018/annual-and-sustainability-report-2018.pdf#page=22.12
Smallman, C., & John, G. (2001). British directors’ perspectives on the impact of health and safety on corporate performance. Safety Science, 38(3), 227–239. https://doi.org/10.1016/S0925-7535(01)00003-0
Spillane, J., & Oyedele, L. O. (2013). Strategies for effective management of health and safety in confined site construction. Construction Economics and Building, 13(3), 50–64. https://doi.org/10.5130/AJCEB.v13i4.3619
Tam, C. M., Zeng, S. X., & Deng, Z. M. (2004). Identifying elements of poor construction safety management in China. Safety Science, 42, 569–586. https://doi.org/10.1016/j.ssci.2003.09.001
Tayeh, B. A., Alaloul, W. S., & Muhaisen, W. B. (2019). Challenges facing small-sized construction firms in the Gaza Strip. Open Civil Engineering Journal, 13, 331–340. https://doi.org/10.2174/1874149501913010051
Toole, T. M. (2002). Construction site safety roles. Journal of Construction Engineering and Management, 128(3), 203–210. https://doi.org/10.1061/(ASCE)0733-9364(2002)128:3(203)
Turner Construction. (2020). Safety management and risk reduction report. https://www.turnerconstruction.com
Vitharana, V. H. P., De Silva, G. H. M. J., & De Silva, S. (2015). Health hazards, risk and safety practices in construction sites – A review study. Engineer: Journal of the Institution of Engineers, Sri Lanka, 48(3), 35–44. https://doi.org/10.4038/engineer.v48i3.6840
Walters, D. (2010). The role of worker representation and consultation in managing health and safety in the construction industry. International Labour Organization.
Wang, W. C., Liu, J. J., & Chou, S. C. (2006). Simulation-based safety evaluation model integrated with network schedule. Automation in Construction, 15(3), 341–354. https://doi.org/10.1016/j.autcon.2005.06.007
Yiu, N. S. N., & Chan, D. W. M. (2016). A taxonomic review of the application of safety management systems in construction. Journal of International Scientific Publications: Ecology & Safety, 10, 394–408.
Yiu, N. S. N., Sze, N., & Chan, D. W. (2018). Implementation of safety management systems in Hong Kong construction industry – A safety practitioner’s perspective. Journal of Safety Research, 64, 1–9. https://doi.org/10.1016/j.jsr.2017.12.011
Yiu, N. S. N., Chan, D. W. M., Shan, M., & Wong, F. K. W. (2019). Implementation of safety management system in managing construction projects: Benefits and obstacles. Safety Science, 117, 23–32. https://doi.org/10.1016/j.ssci.2019.03.027
Yung, P. (2009). Institutional arrangements and construction safety in China: An empirical examination. Construction Management and Economics, 27(5), 439–450. https://doi.org/10.1080/01446190902855633
Zahoor, H., Chan, A. P. C., Masood, R., Choudhry, R. M., Javed, A. A., & Utama, W. P. (2016). Occupational safety and health performance in the Pakistani construction industry: Stakeholders’ perspective. International Journal of Construction Management, 16(3), 209–219. https://doi.org/10.1080/15623599.2015.1138027
Zerguine, H., Jalaludin, J., & Tamrin, S. B. M. (2016). Behaviour based safety approach and factors affecting unsafe behaviour in AEC industry: A review. Asia Pacific Environmental and Occupational Health Journal, 2(1), 1–12.
Zulkifle, Z., & Hanafi, W. N. W. (2017). Impact of safety management practices enforcement toward employee safety in construction industry. In 8th International Economics and Business Management Conference. https://doi.org/10.15405/epsbs.2018.07.02.58
View article in other formats
CrossMark check
Published
Issue
Section
Copyright
Copyright (c) 2025 The Author(s). Published by Vilnius Gediminas Technical University.
License
This work is licensed under a Creative Commons Attribution 4.0 International License.