Share:


Performance evaluation of palm oil clinker as cement and sand replacement materials in foamed concrete

    Farhang Salari Affiliation
    ; U. Johnson Alengaram Affiliation
    ; Ahmed Mahmoud Alnahhal Affiliation
    ; Zainah Ibrahim Affiliation
    ; Karthick Srinivas M Affiliation
    ; Muhammad S. I. Ibrahim Affiliation
    ; Anand N Affiliation

Abstract

Cellular lightweight concrete (CLC), also known as foamed concrete, has been extensively used in construction for decades. Foamed concrete’s properties include low density, excellent thermal conductivity, great workability, and selfcompaction; these features enable foamed concrete to be utilized in various contexts. However, the excessive use of conventional materials in concrete production harms the environment. Therefore, using agro-waste as a material to construct ecologically sustainable structures has numerous practical and financial benefits. Palm oil clinker (POC) is a waste product resulting from solid waste combustion during palm oil extraction. This research focused on the properties of foamed concrete with POC at 0%, 25%, 50%, 75%, and 100% as the fine aggregate replacement to develop lightweight foamed concrete (LFC) with a density of 1300 kg/m3. Besides, the potential of POC powder (POCP) and thermally activated POCP (TPOCP) at 0%, 10%, 20%, and 30% as cement replacements was examined. The development of compressive strength during a 90-day curing period was investigated. In addition, tensile and flexural strengths were assessed and reported, and the elastic modulus of the LFC was discussed. The transport properties of water absorption, porosity, and sorptivity were also investigated. The durability of concrete derivatives can exhibit the product’s resistance to chemical attacks and environmental conditions. After 75 days of immersion in hydrochloric acid and magnesium sulfate, the chemical resistivity of the produced LFC was determined by measuring the loss in weight and compressive strength. In addition, the effects of elevated temperatures on the LFC were determined by analyzing the mass loss and compressive strength degradation of specimens exposed to temperatures ranging from 200 to 800 °C. The test results demonstrated that the complete replacement of sand with POC enhanced the compressive strength of LFC by more than 50%. Similarly, POC-based LFC had higher flexural and tensile strengths than normal LFC. Besides, substituting 20% of cement with TPOCP could improve the strength of LFC by 23% during the initial curing days. Utilizing the optimal proportions of POC and POCP could enhance the residual strengths of LFC. Therefore, POC has the potential to be utilized as a fine aggregate and cementitious material to produce sustainable concrete.

Keyword : palm oil clinker, sand replacement material, foamed concrete, durability performance

How to Cite
Salari, F., Johnson Alengaram, U., Alnahhal, A. M., Ibrahim, Z., Srinivas M, K., Ibrahim, M. S. I., & N, A. (2023). Performance evaluation of palm oil clinker as cement and sand replacement materials in foamed concrete. Journal of Civil Engineering and Management, 29(8), 691–713. https://doi.org/10.3846/jcem.2023.19785
Published in Issue
Oct 24, 2023
Abstract Views
335
PDF Downloads
336
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Abdullahi, M., Al-Mattarneh, H., Hassan, A., Hassan, M. H., & Mohammed, B. (2008). Trial mix design methodology for Palm Oil Clinker (POC) concrete. In The International Conference on Construction and Building Technology, Kuala Lumpur, Malaysia.

Abraham, H. B., Alengaram, U. J., Alnahhal, A. M., Haddadian, A., Karthick, S., & Deboucha, W. (2021). Performance evaluation of cellular lightweight concrete using palm oil industrial waste as cement and fine aggregate replacement materials. Materials Today: Proceedings, 52(3), 902–910. https://doi.org/10.1016/j.matpr.2021.10.301

Abutaha, F., Abdul Razak, H., & Kanadasan, J. (2016). Effect of palm oil clinker (POC) aggregates on fresh and hardened properties of concrete. Construction and Building Materials, 112, 416–423. https://doi.org/10.1016/j.conbuildmat.2016.02.172

Adhikary, S. K., Ashish, D. K., & Rudžionis, Ž. (2021a). Aerogel based thermal insulating cementitious composites: A review. Energy and Buildings, 245, 111058. https://doi.org/10.1016/j.enbuild.2021.111058

Adhikary, S. K., Ashish, D. K., & Rudžionis, Ž. (2021b). Expanded glass as light-weight aggregate in concrete – A review. Journal of Cleaner Production, 313, 127848. https://doi.org/10.1016/j.jclepro.2021.127848

Adhikary, S. K., Rudžionis, Ž., Tučkutė, S., & Ashish, D. K. (2021c). Effects of carbon nanotubes on expanded glass and silica aerogel based lightweight concrete. Scientific Reports, 11(1), 2104. https://doi.org/10.1038/s41598-021-81665-y

Adhikary, S. K., & Ashish, D. K. (2022). Turning waste expanded polystyrene into lightweight aggregate: Towards sustainable construction industry. Science of The Total Environment, 837, 155852. https://doi.org/10.1016/j.scitotenv.2022.155852

Adhikary, S. K., Ashish, D. K., & Rudžionis, Ž. (2022a). A review on sustainable use of agricultural straw and husk biomass ashes: Transitioning towards low carbon economy. Science of The Total Environment, 838, 156407. https://doi.org/10.1016/j.scitotenv.2022.156407

Adhikary, S. K., Ashish, D. K., Sharma, H., Patel, J., Rudžionis, Ž., Al-Ajamee, M., Thomas, B. S., & Khatib, J. M. (2022b). Lightweight self-compacting concrete: A review. Resources, Conservation & Recycling Advances, 15, 200107. https://doi.org/10.1016/j.rcradv.2022.200107

Ahmmad, R., Jumaat, M. Z., Bahri, S., & Islam, A. B. M. S. (2014). Ductility performance of lightweight concrete element containing massive palm shell clinker. Construction and Building Materials, 63, 234–241. https://doi.org/10.1016/j.conbuildmat.2014.04.022

Ahmmad, R., Jumaat, M. Z., Alengaram, U. J., Bahri, S., Rehman, M. A., & Hashim, H. b. (2016). Performance evaluation of palm oil clinker as coarse aggregate in high strength lightweight concrete. Journal of Cleaner Production, 112, 566–574. https://doi.org/10.1016/j.jclepro.2015.08.043

Ahmmad, R., Alengaram, U. J., Jumaat, M. Z., Sulong, N. H. R., Yusuf, M. O., & Rehman, M. A. (2017). Feasibility study on the use of high volume palm oil clinker waste in environmental friendly lightweight concrete. Construction and Building Materials, 135, 94–103. https://doi.org/10.1016/j.conbuildmat.2016.12.098

Alengaram, U. J., Muhit, B. A. A., & Jumaat, M. Z. b. (2013). Utilization of oil palm kernel shell as lightweight aggregate in concrete – A review. Construction and Building Materials, 38, 161–172. https://doi.org/10.1016/j.conbuildmat.2012.08.026

Ali, M. B., Saidur, R., & Hossain, M. S. (2011). A review on emission analysis in cement industries. Renewable and Sustainable Energy Reviews, 15(5), 2252–2261. https://doi.org/10.1016/j.rser.2011.02.014

Alnahhal, M. F., Alengaram, U. J., Jumaat, M. Z., Alsubari, B., Alqedra, M. A., & Mo, K. H. (2018). Effect of aggressive chemicals on durability and microstructure properties of concrete containing crushed new concrete aggregate and non-traditional supplementary cementitious materials. Construction and Building Materials, 163, 482–495. https://doi.org/10.1016/j.conbuildmat.2017.12.106

American Society for Testing and Materials. (2012a). Standard test method for foaming agents for use in producing cellular concrete using preformed foam (C796/C796M). West Conshohocken, PA, USA.

American Society for Testing and Materials. (2012b). Standard test methods for chemical resistance of mortars, grouts, and monolithic surfacings and polymer concretes (ASTM C267-01). West Conshohocken, PA, USA.

American Society for Testing and Materials. (2013). Standard test method for density, absorption, and voids in hardened concrete (ASTM C642-13). West Conshohocken, PA, USA.

American Society for Testing and Materials. (2014a). Standard specification for portland cement (ASTM C150-14). West Conshohocken, PA, USA.

American Society for Testing and Materials. (2014b). Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete (ASTM C618-14). West Conshohocken, PA, USA.

American Society for Testing and Materials. (2014c). Standard test method for density, relative density (specific gravity), and absorption of fine aggregate (ASTM C128-14). West Conshohocken, PA, USA.

American Society for Testing and Materials. (2014d). Standard test method for sieve analysis of fine and coarse aggregates (ASTM C136-14). West Conshohocken, PA, USA.

American Society for Testing and Materials. (2015). Standard test method for length change of hydraulic-cement mortars exposed to a sulfate solution (ASTM C1012/C1012M-15). West Conshohocken, PA, USA.

American Society for Testing and Materials. (2020). Standard test method for measurement of rate of absorption of water by hydraulic-cement concretes (ASTM C1585-20). West Conshohocken, PA, USA.

American Society for Testing and Materials. (2022). Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression (ASTM C469/C469M-22). West Conshohocken, PA, USA.

American Society for Testing and Materials. (2016). Standard test method for flexural strength of concrete (using simple beam with center-point loading) (ASTM C293-16). West Conshohocken, PA, USA.

Amin, M. S., El-Gamal, S. M. A., & Hashem, F. S. (2015). Fire resistance and mechanical properties of carbon nanotubes – clay bricks wastes (Homra) composites cement. Construction and Building Materials, 98, 237–249. https://doi.org/10.1016/j.conbuildmat.2015.08.074

Amran, Y. H. M., Farzadnia, N., & Abang Ali, A. A. (2015). Properties and applications of foamed concrete; a review. Construction and Building Materials, 101, 990–1005. https://doi.org/10.1016/j.conbuildmat.2015.10.112

Andiç-Çakır, Ö., & Hızal, S. (2012). Influence of elevated temperatures on the mechanical properties and microstructure of self consolidating lightweight aggregate concrete. Construction and Building Materials, 34, 575–583. https://doi.org/10.1016/j.conbuildmat.2012.02.088

Ashish, D. K. (2019). Concrete made with waste marble powder and supplementary cementitious material for sustainable development. Journal of Cleaner Production, 211, 716–729. https://doi.org/10.1016/j.jclepro.2018.11.245

Ashish, D. K., & Verma, S. K. (2021). Robustness of self-compacting concrete containing waste foundry sand and metakaolin: A sustainable approach. Journal of Hazardous Materials, 401, 123329. https://doi.org/10.1016/j.jhazmat.2020.123329

Ayough, P., Ramli Sulong, N. H., & Ibrahim, Z. (2020). Analysis and review of concrete-filled double skin steel tubes under compression. Thin-Walled Structures, 148, 106495. https://doi.org/10.1016/j.tws.2019.106495

Ayough, P., Ibrahim, Z., Sulong, N. H. R., Hsiao, P.-C., & Elchalakani, M. (2021). Numerical analysis of square concrete-filled double skin steel tubular columns with rubberized concrete. Structures, 32, 1026–1047. https://doi.org/10.1016/j.istruc.2021.03.054

Ayough, P., Ibrahim, Z., Ramli Sulong, N. H., Ganasan, R., Hamad Ghayeb, H., & Elchalakani, M. (2022). Experimental and numerical investigations into the compressive behaviour of circular concrete-filled double-skin steel tubular columns with bolted shear studs. Structures, 46, 880–898. https://doi.org/10.1016/j.istruc.2022.10.102

Ayough, P., Ibrahim, Z., Jameel, M., & Alnahhal, A. M. (2023a). Axial compression behaviour of circular concrete-filled double-skin steel tubular columns with bolted shear studs: Numerical investigation and design. Journal of Constructional Steel Research, 205, 107911. https://doi.org/10.1016/j.jcsr.2023.107911

Ayough, P., Wang, Y.-H., & Ibrahim, Z. (2023b). Analytical study of concrete-filled steel tubular stub columns with double inner steel tubes. Steel and Composite Structures, 47, 645–661. https://doi.org/10.12989/scs.2023.47.5.645

Bashar, I. I., Alengaram, U. J., Jumaat, M. Z., Islam, A., Santhi, H., & Sharmin, A. (2016). Engineering properties and fracture behaviour of high volume palm oil fuel ash based fibre reinforced geopolymer concrete. Construction and Building Materials, 111, 286–297. https://doi.org/10.1016/j.conbuildmat.2016.02.022

Basri, H. B., Mannan, M. A., & Zain, M. F. M. (1999). Concrete using waste oil palm shells as aggregate. Cement and Concrete Research, 29(4), 619–622. https://doi.org/10.1016/S0008-8846(98)00233-6

Bassuoni, M. T., & Nehdi, M. L. (2007). Resistance of self-consolidating concrete to sulfuric acid attack with consecutive pH reduction. Cement and Concrete Research, 37(7), 1070–1084. https://doi.org/10.1016/j.cemconres.2007.04.014

Bentz, D. P., & Snyder, K. A. (1999). Protected paste volume in concrete: Extension to internal curing using saturated lightweight fine aggregate. Cement and Concrete Research, 29(11), 1863–1867. https://doi.org/10.1016/S0008-8846(99)00178-7

British Standards Institution. (1986). Testing concrete. Part 125. Methods for mixing and sampling fresh concrete in the laboratory (BS 1881: Part 125).

British Standards Institution. (1992). BSI Document 92/17688. European Draft Standard Specification for lightweight aggregates (CEN/TC154/SC5). Sub Committee Lightweight Aggregates.

British Standards Institution. (2019). Testing hardened concrete - Compressive strength of test specimens (BS EN 12390-3:2019).

Chan, N., Young-Rojanschi, C., & Li, S. (2018). Effect of water-to-cement ratio and curing method on the strength, shrinkage and slump of the biosand filter concrete body. Water Science and Technology, 77(6), 1744–1750. https://doi.org/10.2166/wst.2018.063

Chandara, C., Mohd Azizli, K. A., Ahmad, Z. A., Saiyid Hashim, S. F., & Sakai, E. (2012). Heat of hydration of blended cement containing treated ground palm oil fuel ash. Construction and Building Materials, 27(1), 78–81. https://doi.org/10.1016/j.conbuildmat.2011.08.011

Chandran, S. (2010). Performance of foamed concrete by using by product material: palm oil clinker crushed (POCC) as sand replacement. Universiti Malaysia Pahang.

Chatveera, B., & Lertwattanaruk, P. (2011). Durability of conventional concretes containing black rice husk ash. Journal of Environmental Management, 92(1), 59–66. https://doi.org/10.1016/j.jenvman.2010.08.007

Chinnu, S. N., Minnu, S. N., Bahurudeen, A., & Senthilkumar, R. (2021). Reuse of industrial and agricultural by-products as pozzolan and aggregates in lightweight concrete. Construction and Building Materials, 302, 124172. https://doi.org/10.1016/j.conbuildmat.2021.124172

Darvish, P., Alengaram, U. J., Alnahhal, A. M., Poh, Y. S., & Ibrahim, S. (2021). Enunciation of size effect of sustainable palm oil clinker sand on the characteristics of cement and geopolymer mortars. Journal of Building Engineering, 44, 103335. https://doi.org/10.1016/j.jobe.2021.103335

Elchalakani, M., Ayough, P., & Yang, B. (2022). Single skin and double skin concrete filled tubular structures: Analysis and design. Elsevier Science.

García-Gusano, D., Cabal, H., & Lechón, Y. (2015). Long-term behaviour of CO2 emissions from cement production in Spain: Scenario analysis using an energy optimisation model. Journal of Cleaner Production, 99, 101–111. https://doi.org/10.1016/j.jclepro.2015.03.027

Gavriletea, M. D. (2017). Environmental impacts of sand exploitation. Analysis of sand market. Sustainability, 9(7), 1118. https://doi.org/10.3390/su9071118

Gutberlet, T., Hilbig, H., & Beddoe, R. E. (2015). Acid attack on hydrated cement – Effect of mineral acids on the degradation process. Cement and Concrete Research, 74, 35–43. https://doi.org/10.1016/j.cemconres.2015.03.011

Haddadian, A., Johnson Alengaram, U., Ayough, P., Mo, K. H., & Mahmoud Alnahhal, A. (2023). Inherent characteristics of agro and industrial By-Products based lightweight concrete – A comprehensive review. Construction and Building Materials, 397, 132298. https://doi.org/10.1016/j.conbuildmat.2023.132298

Hamada, H. M., Alattar, A. A., Yahaya, F. M., Muthusamy, K., & Tayeh, B. A. (2021). Mechanical properties of semi-lightweight concrete containing nano-palm oil clinker powder. Physics and Chemistry of the Earth, Parts A/B/C, 121, 102977. https://doi.org/10.1016/j.pce.2021.102977

Heikal, M., El-Didamony, H., Sokkary, T. M., & Ahmed, I. A. (2013). Behavior of composite cement pastes containing microsilica and fly ash at elevated temperature. Construction and Building Materials, 38, 1180–1190. https://doi.org/10.1016/j.conbuildmat.2012.09.069

Jo, B. W., Sikandar, M. A., Chakraborty, S., & Baloch, Z. (2017). Investigation of the acid and sulfate resistance performances of hydrogen-rich water based mortars. Construction and Building Materials, 137, 1–11. https://doi.org/10.1016/j.conbuildmat.2017.01.074

Jumaat, M. Z., Alengaram, U. J., Ahmmad, R., Bahri, S., & Islam, A. B. M. S. (2015). Characteristics of palm oil clinker as replacement for oil palm shell in lightweight concrete subjected to elevated temperature. Construction and Building Materials, 101, 942–951. https://doi.org/10.1016/j.conbuildmat.2015.10.104

Just, A., & Middendorf, B. (2009). Microstructure of high-strength foam concrete. Materials Characterization, 60(7), 741–748. https://doi.org/10.1016/j.matchar.2008.12.011

Kabir, S. M. A., Alengaram, U. J., Jumaat, M. Z., Yusoff, S., Sharmin, A., & Bashar, I. I. (2017). Performance evaluation and some durability characteristics of environmental friendly palm oil clinker based geopolymer concrete. Journal of Cleaner Production, 161, 477–492. https://doi.org/10.1016/j.jclepro.2017.05.002

Kanadasan, J., & Abdul Razak, H. (2014). Mix design for self-compacting palm oil clinker concrete based on particle packing. Materials & Design, 56, 9–19. https://doi.org/10.1016/j.matdes.2013.10.086

Kanadasan, J., & Abdul Razak, H. (2015a). Engineering and sustainability performance of self-compacting palm oil mill incinerated waste concrete. Journal of Cleaner Production, 89, 78–86. https://doi.org/10.1016/j.jclepro.2014.11.002

Kanadasan, J., & Abdul Razak, H. (2015b). Utilization of palm oil clinker as cement replacement material. Materials, 8(12), 8817–8838. https://doi.org/10.3390/ma8125494

Kanadasan, J., Fauzi, A. F. A., Razak, H. A., Selliah, P., Subramaniam, V., & Yusoff, S. (2015). Feasibility studies of palm oil mill waste aggregates for the construction industry. Materials, 8(9), 6508–6530. https://doi.org/10.3390/ma8095319

Kanadasan, J., Abdul Razak, H., & Subramaniam, V. (2018). Properties of high flowable mortar containing high volume palm oil clinker (POC) fine for eco-friendly construction. Journal of Cleaner Production, 170, 1244–1259. https://doi.org/10.1016/j.jclepro.2017.09.068

Karim, M. R., Hashim, H., & Abdul Razak, H. (2016a). Assessment of pozzolanic activity of palm oil clinker powder. Construction and Building Materials, 127, 335–343. https://doi.org/10.1016/j.conbuildmat.2016.10.002

Karim, M. R., Hashim, H., & Abdul Razak, H. (2016b). Thermal activation effect on palm oil clinker properties and their influence on strength development in cement mortar. Construction and Building Materials, 125, 670–678. https://doi.org/10.1016/j.conbuildmat.2016.08.092

Karim, M. R., Chowdhury, F. I., Zabed, H., & Saidur, M. R. (2018). Effect of elevated temperatures on compressive strength and microstructure of cement paste containing palm oil clinker powder. Construction and Building Materials, 183, 376–383. https://doi.org/10.1016/j.conbuildmat.2018.06.147

Kearsley, E. P., & Wainwright, P. J. (2002). The effect of porosity on the strength of foamed concrete. Cement and Concrete Research, 32(2), 233–239. https://doi.org/10.1016/S0008-8846(01)00665-2

Khalil, N. M., Hassan, E. M., Shakdofa, M. M. E., & Farahat, M. (2014). Beneficiation of the huge waste quantities of barley and rice husks as well as coal fly ashes as additives for Portland cement. Journal of Industrial and Engineering Chemistry, 20(5), 2998–3008. https://doi.org/10.1016/j.jiec.2013.11.034

Kumar, B. N. N., Kumar, P. K., Babu, E. R., Gopal, M., Reddy, D. S., Sreekanth, K., & Yellppa, U. (2016). An experimental study on sea sand by partial replacement of sea sand in concrete. International Journal of Scientific Research in Science and Technology, 2(2), 181–184.

Kupaei, R. H., Alengaram, U. J., Jumaat, M. Z. B., & Nikraz, H. (2013). Mix design for fly ash based oil palm shell geopolymer lightweight concrete. Construction and Building Materials, 43, 490–496. https://doi.org/10.1016/j.conbuildmat.2013.02.071

Li, Q., Li, Z., & Yuan, G. (2012). Effects of elevated temperatures on properties of concrete containing ground granulated blast furnace slag as cementitious material. Construction and Building Materials, 35, 687–692. https://doi.org/10.1016/j.conbuildmat.2012.04.103

Li, L., Zhang, H., Guo, X., Zhou, X., Lu, L., Chen, M., & Cheng, X. (2019). Pore structure evolution and strength development of hardened cement paste with super low water-to-cement ratios. Construction and Building Materials, 227, 117108. https://doi.org/10.1016/j.conbuildmat.2019.117108

Lim, S. K., Tan, C. S., Chen, K. P., Lee, M. L., & Lee, W. P. (2013). Effect of different sand grading on strength properties of cement grout. Construction and Building Materials, 38, 348–355. https://doi.org/10.1016/j.conbuildmat.2012.08.030

Lo, T. Y., Tang, W. C., & Cui, H. Z. (2007). The effects of aggregate properties on lightweight concrete. Building and Environment, 42(8), 3025–3029. https://doi.org/10.1016/j.buildenv.2005.06.031

Lo, T. Y., Cui, H. Z., Tang, W. C., & Leung, W. M. (2008). The effect of aggregate absorption on pore area at interfacial zone of lightweight concrete. Construction and Building Materials, 22(4), 623–628. https://doi.org/10.1016/j.conbuildmat.2006.10.011

Marland, G., Boden, T. A., & Andres, R. J. (2003). Global, regional, and national CO2 emissions in trends: A compendium of data on global change. Carbon Dioxide Information Analysis Center, Oak Ridge National Laboratory, US Department of Energy, Oak Ridge, TN.

Matos, A. M., & Sousa-Coutinho, J. (2012). Durability of mortar using waste glass powder as cement replacement. Construction and Building Materials, 36, 205–215. https://doi.org/10.1016/j.conbuildmat.2012.04.027

Mefteh, H., Kebaïli, O., Oucief, H., Berredjem, L., & Arabi, N. (2013). Influence of moisture conditioning of recycled aggregates on the properties of fresh and hardened concrete. Journal of Cleaner Production, 54, 282–288. https://doi.org/10.1016/j.jclepro.2013.05.009

Mehta, A., & Ashish, D. K. (2020). Silica fume and waste glass in cement concrete production: A review. Journal of Building Engineering, 29, 100888. https://doi.org/10.1016/j.jobe.2019.100888

Mindess, S. (2019). Developments in the formulation and reinforcement of concrete. Woodhead Publishing.

Mindess, S., Young, J. F., & Darwin, D. (2003). Concrete (2nd ed.). Prentice Hall.

Monteiro, P. (2006). Concrete: microstructure, properties, and materials. McGraw-Hill Publishing.

Mugahed Amran, Y. H., Abang Ali, A. A., Rashid, R. S. M., Hejazi, F., & Safiee, N. A. (2016). Structural behavior of axially loaded precast foamed concrete sandwich panels. Construction and Building Materials, 107, 307–320. https://doi.org/10.1016/j.conbuildmat.2016.01.020

Mun, K. J. (2007). Development and tests of lightweight aggregate using sewage sludge for nonstructural concrete. Construction and Building Materials, 21(7), 1583–1588. https://doi.org/10.1016/j.conbuildmat.2005.09.009

Mundra, S., Agrawal, V., & Nagar, R. (2020). Sandstone cutting waste as partial replacement of fine aggregates in concrete: A mechanical strength perspective. Journal of Building Engineering, 32, 101534. https://doi.org/10.1016/j.jobe.2020.101534

Muthusamy, K., Budiea, A. M. A., Syed Mohsin, S. M., Muhammad Zam, N. S., & Ahmad Nadzri, N. E. (2021). Properties of fly ash cement brick containing palm oil clinker as fine aggregate replacement. Materials Today: Proceedings, 46, 1652–1656. doi: https://doi.org/10.1016/j.matpr.2020.07.260

Nambiar, E. K. K., & Ramamurthy, K. (2006a). Influence of filler type on the properties of foam concrete. Cement and Concrete Composites, 28(5), 475–480. https://doi.org/10.1016/j.cemconcomp.2005.12.001

Nambiar, E. K. K., & Ramamurthy, K. (2006b). Models relating mixture composition to the density and strength of foam concrete using response surface methodology. Cement and Concrete Composites, 28(9), 752–760. https://doi.org/10.1016/j.cemconcomp.2006.06.001

Narayan, N., & Ramamurthy, K. (2000). Structure and properties of autoclaved aerated concrete: A review, microstructural investigations on aerated concrete. Cement and Concrete Research, 22, 321–329. https://doi.org/10.1016/S0958-9465(00)00016-0

Nayaka, R. R., Alengaram, U. J., Jumaat, M. Z., Yusoff, S. B., & Alnahhal, M. F. (2018). High volume cement replacement by environmental friendly industrial by-product palm oil clinker powder in cement – lime masonry mortar. Journal of Cleaner Production, 190, 272–284. https://doi.org/10.1016/j.jclepro.2018.03.291

Nayaka, R. R., Alengaram, U. J., Jumaat, M. Z., Yusoff, S. B., & Ganasan, R. (2019). Performance evaluation of masonry grout containing high volume of palm oil industry by-products. Journal of Cleaner Production, 220, 1202–1214. https://doi.org/10.1016/j.jclepro.2019.02.134

Neville, A. M. (2009). Properties of concrete (4th ed., Vol. 4). Longman.

Neville, A. M., & Brooks, J. J. (2010). Concrete Technology. Prentice Hall.

Omar, W., & Mohamed, R. N. (2002). The performance of pretensioned prestressed concrete beams made with lightweight concrete. Malaysian Journal of Civil Engineering, 14(1).

Pandey, S. P., & Sharma, R. L. (2000). The influence of mineral additives on the strength and porosity of OPC mortar. Cement and Concrete Research, 30(1), 19–23. https://doi.org/10.1016/S0008-8846(99)00180-5

Röler, M., & Odler, I. (1985). Investigations on the relationship between porosity, structure and strength of hydrated portland cement pastes I. Effect of porosity. Cement and Concrete Research, 15(2), 320–330. https://doi.org/10.1016/0008-8846(85)90044-4

Rudžionis, Ž., Adhikary, S. K., Manhanga, F. C., Ashish, D. K., Ivanauskas, R., Stelmokaitis, G., & Navickas, A. A. (2021). Natural zeolite powder in cementitious composites and its application as heavy metal absorbents. Journal of Building Engineering, 43, 103085. https://doi.org/10.1016/j.jobe.2021.103085

Saad, M., Abo-El-Enein, S. A., Hanna, G. B., & Kotkata, M. F. (1996a). Effect of silica fume on the phase composition and microstructure of thermally treated concrete. Cement and Concrete Research, 26(10), 1479–1484. https://doi.org/10.1016/0008-8846(96)00142-1

Saad, M., Abo-El-Enein, S. A., Hanna, G. B., & Kotkata, M. F. (1996b). Effect of temperature on physical and mechanical properties of concrete containing silica fume. Cement and Concrete Research, 26(5), 669–675. https://doi.org/10.1016/S0008-8846(96)85002-2

Sancak, E., Dursun Sari, Y., & Simsek, O. (2008). Effects of elevated temperature on compressive strength and weight loss of the light-weight concrete with silica fume and superplasticizer. Cement and Concrete Composites, 30(8), 715–721. https://doi.org/10.1016/j.cemconcomp.2008.01.004

Sata, V., Jaturapitakkul, C., & Kiattikomol, K. (2007). Influence of pozzolan from various by-product materials on mechanical properties of high-strength concrete. Construction and Building Materials, 21(7), 1589–1598. https://doi.org/10.1016/j.conbuildmat.2005.09.011

Schneider, M., Romer, M., Tschudin, M., & Bolio, H. (2011). Sustainable cement production – present and future. Cement and Concrete Research, 41(7), 642–650. https://doi.org/10.1016/j.cemconres.2011.03.019

Shafigh, P., Johnson Alengaram, U., Mahmud, H. B., & Jumaat, M. Z. (2013). Engineering properties of oil palm shell lightweight concrete containing fly ash. Materials & Design, 49, 613–621. https://doi.org/10.1016/j.matdes.2013.02.004

Shah, S. N., Mo, K. H., Yap, S. P., Yang, J., & Ling, T.-C. (2021). Lightweight foamed concrete as a promising avenue for incorporating waste materials: A review. Resources, Conservation and Recycling, 164, 105103. https://doi.org/10.1016/j.resconrec.2020.105103

Shi, C., Jiménez, A. F., & Palomo, A. (2011). New cements for the 21st century: The pursuit of an alternative to Portland cement. Cement and Concrete Research, 41(7), 750–763. https://doi.org/10.1016/j.cemconres.2011.03.016

Singh, M., Choudhary, K., Srivastava, A., Singh Sangwan, K., & Bhunia, D. (2017). A study on environmental and economic impacts of using waste marble powder in concrete. Journal of Building Engineering, 13, 87–95. https://doi.org/10.1016/j.jobe.2017.07.009

Singh, M., & Siddique, R. (2014). Compressive strength, drying shrinkage and chemical resistance of concrete incorporating coal bottom ash as partial or total replacement of sand. Construction and Building Materials, 68, 39–48. https://doi.org/10.1016/j.conbuildmat.2014.06.034

Tu, T.-Y., Chen, Y.-Y., & Hwang, C.-L. (2006). Properties of HPC with recycled aggregates. Cement and Concrete Research, 36(5), 943–950. https://doi.org/10.1016/j.cemconres.2005.11.022

World Business Council for Sustainable Development, & International Energy Agency. (2009). Cement technology road-map 2009. Carbon emissions reductions up to 2050. Paris, France.

Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2014). Geopolymer foam concrete: An emerging material for sustainable construction. Construction and Building Materials, 56, 113–127. https://doi.org/10.1016/j.conbuildmat.2014.01.081