Share:


The rutting resistance and resilient moduli of Pre-Vulcanized Liquid Natural Rubber modified asphaltic concrete in warm-mix temperature condition

    Irfan Affiliation
    ; Bambang Sugeng Subagio Affiliation
    ; Eri Susanto Hariyadi Affiliation
    ; Indra Maha Affiliation

Abstract

Pre-Vulcanized Liquid Natural Rubber (PVLNR) modified asphalt leaves problems such as increasing the viscosity, thereby increasing the mixing and compaction temperature up to 175 °C, accelerating the ageing process. Therefore it is necessary to do developing methods using PVLNR at lower mixing temperatures requires warm-mix technology. This study aimed to evaluate the use of PVLNR modified asphalt in warm mix asphalt (WMA). Laboratory testing includes rheological modified asphalt, the workability analysis, Resilient Modulus and Deformation. The results showed that the PVLNR content decreased penetration increased the softening point and asphalt viscosity. In addition, additive Rediset LQ plays a role in reducing asphalt viscosity. The advantages of PVLNR modified asphalt are increasing elastic recovery, saving asphalt consumption and increasing the Modulus of hot mix asphalt rubber (HAR) and warm mix asphalt rubber (WAR). In addition, the Rutting resistance of WAR is better than that of HMA and WMA.

Keyword : Pre-Vulcanized Liquid Natural Rubber, warm mix, Rediset LQ

How to Cite
Irfan, Subagio, B. S., Hariyadi, E. S., & Maha, I. (2022). The rutting resistance and resilient moduli of Pre-Vulcanized Liquid Natural Rubber modified asphaltic concrete in warm-mix temperature condition. Journal of Civil Engineering and Management, 28(3), 196–207. https://doi.org/10.3846/jcem.2022.16452
Published in Issue
Feb 24, 2022
Abstract Views
298
PDF Downloads
225
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Abdul Hassan, N., Abdulhussein Abdulridha Almusawi, A., Zul Hanif Mahmud, M., Asniza Mohamed Abdullah, N., Athma Mohd Shukry, N., Mashros, N., Putra Jaya, R., & Md Yusoff, N. I. (2019). Engineering properties of crumb rubber modified dense-graded asphalt mixtures using dry process. In IOP Conference Series: Earth and Environmental Science, Volume 220, The 12th International Civil Engineering Post Graduate Conference (SEPKA), The 3rd International Symposium on Expertise of Engineering Design (ISEED), 27–28 August 2018, Johor, Malaysia. https://doi.org/10.1088/1755-1315/220/1/012009

Al-Khateeb, G., & Basheer, I. (2009). A three-stage rutting model utilizing rutting performance data from the Hamburg Wheel-Tracking Device (WTD). Road and Transport Research, 18(3), 12–25.

Al-Sabaeei, A., Nur, N. I., Napiah, M., & Sutanto, M. (2019). A review of using natural rubber in the modification of bitumen and asphalt mixtures used for road construction. Jurnal Teknologi, 81(6), 81–88. https://doi.org/10.11113/jt.v81.13487

Ameli, A., Nasr, D., Babagoli, R., Hossein Pakshir, A., Norouzi, N., & Davoudinezhad, S. (2020). Laboratory evaluation of rheological behavior of binder and performance of stone matrix asphalt (SMA) mixtures containing zycotherm nanotechnology, sasobit, and rheofalt warm mixture additives. Construction and Building Materials, 262, 120757. https://doi.org/10.1016/j.conbuildmat.2020.120757

American Association of State and Highway Transportation Officials. (1998). Standard method of test for elastic recovery test of asphalt materials by means of a ductilometer (AASHTO T 301-98).

American Association of State and Highway Transportation Officials. (2013). Standard method of test for preparing and determining the density of asphalt mixture specimens by means of the duperpave gyratory compactor (AASTHO T 312).

American Association of State and Highway Transportation Officials. (2017). Standard method of test for Hamburg Wheel-Track testing of compacted Hot-Mix Asphalt (HMA) (AASHTO T 324-17).

American Association of State and Highway Transportation Officials. (2018). Standard method of test for solubility of bituminous materials (AASHTO T 44-14).

American Society for Testing and Materials (1995). Standard test method for indirect tension test for resilient modulus of bituminous mixtures. (ASTM D4123).

American Society for Testing and Materials. (1999). Standard test method for flat particles, elongated particles, or flat and elongated particles in coarse aggregate (ASTM D4791).

American Society for Testing and Materials. (2001). Standard test method for resistance to degradation of small-size coarse aggregate by abrasion and impact in the Los Angeles machine (ASTM C131).

American Society for Testing and Materials. (2015). Standard test method for relative density (specific gravity) and absorption of coarse aggregate (ASTM C127-84).

Ansari, A. H., Jakarni, F. M., Muniandy, R., Hassim, S., & Elahi, Z. (2021). Natural rubber as a renewable and sustainable bio-modifier for pavement applications: A review. Journal of Cleaner Production, 289, 125727. https://doi.org/10.1016/j.jclepro.2020.125727

Asian Development Bank. (2012). Indonesia. Transport sector assessment, strategy, and road map. http://www.adb.org/sites/default/files/institutional-document/33652/files/ino-transport-assessment.pdf

Azahar, N. M., Hassan, N. A., Jaya, R. P., Hainin, M. R., Yusoff, N. I. M., Kamaruddin, N. H. M., Yunus, N. Z. M., Hassan, S. A., & Yaacob, H. (2021). Properties of cup lump rubber modified asphalt binder. Road Materials and Pavement Design, 22(6), 1329–1349. https://doi.org/10.1080/14680629.2019.1687007

AzokNobel. (2015a). Rediset ® LQ – 1106.

AzokNobel. (2015b). Beyond warm-mix.

Babagoli, R., Jalali, F., & Khabooshani, M. (2021). Performance properties of WMA modified binders and asphalt mixtures containing PPA/SBR polymer blends. Journal of Thermoplastic Composite Materials. https://doi.org/10.1177/08927057211006460

Banerjee, A., De Fortier Smit, A., & Prozzi, J. A. (2012). The effect of long-term aging on the rheology of warm mix asphalt binders. Fuel, 97, 603–611. https://doi.org/10.1016/j.fuel.2012.01.072

Bendahou, A., Kaddami, H., & Dufresne, A. (2010). Investigation on the effect of cellulosic nanoparticles’ morphology on the properties of natural rubber based nanocomposites. European Polymer Journal, 46, 609–620. https://doi.org/10.1016/j.eurpolymj.2009.12.025

Bennert, T., Reinke, G., Mogawer, W., & Mooney, K. (2010). Assessment of workability and compactability of warm-mix asphalt. Transportation Research Record: Journal of the Transportation Research Board, 2180(1), 36–47. https://doi.org/10.3141/2180-05

Bennert, T., Maher, A., & Sauber, R. (2011). Influence of production temperature and aggregate moisture content on the initial performance of warm-mix asphalt. Transportation Research Record: Journal of the Transportation Research Board, 2208(1), 97–107. https://doi.org/10.3141/2208-13

Bina Marga. (2018). General specification.

Blackley, D. C. (1997). Polymer latices (Science and Technology, Volume 3: Applications of latices). Springer. https://doi.org/10.1007/978-94-011-5848-0

Bressi, S., Fiorentini, N., Huang, J., & Losa, M. (2019). Crumb rubber modifier in road asphalt pavements: State of the art and statistics. Coatings, 9(6), 384. https://doi.org/10.3390/coatings9060384

Capitão, S. D., Picado-Santos, L. G., & Martinho, F. (2012). Pavement engineering materials: Review on the use of warm-mix asphalt. Construction and Building Materials, 36, 1016–1024. https://doi.org/10.1016/j.conbuildmat.2012.06.038

Ditjen Bina Konstruksi. (2018). Indonesia general highway specifications (No. 02/SE/Db/2018).

Du, Y., Chen, J., Han, Z., & Liu, W. (2018). A review on solutions for improving rutting resistance of asphalt pavement and test methods. Construction and Building Materials, 168, 893–905. https://doi.org/10.1016/j.conbuildmat.2018.02.151

Ekwulo, E. O., & Igwe, E. A. (2011). Effect of loading frequency on dynamic modulus of rubber latex-modified asphalt concrete. International Journal of Current Research, 3(9), 26–30.

Farouk, A. I. B., Hassan, N. A., Mahmud, M. Z. H., Mirza, J., Jaya, R. P., Hainin, M. R., Yaacob, H., & Yusoff, N. I. M. (2017). Effects of mixture design variables on rubber–bitumen interaction: properties of dry mixed rubberized asphalt mixture. Materials and Structures, 50, 12. https://doi.org/10.1617/s11527-016-0932-3

Hamzah, M. O., Golchin, B., Jamshidi, A., & Chailleux, E. (2015). Evaluation of Rediset for use in warm-mix asphalt: A review of the literatures. International Journal of Pavement Engineering, 16(9), 809–831. https://doi.org/10.1080/10298436.2014.961020

Ibrahim, A., Ahmad, A., Kamarudin, F., Mansor, S., Shafika, I., & Bahri, S. (2017). Performance of bituminous-modified binder using natural rubber latex as green enhancer. In Symposium on Innovation and Creativity (iMIT-SIC) (pp. 153–158).

Irfan, I., Subagio, B. S., Hariyadi, E. S., & Maha, I. (2020). Optimizing the use of Rediset ® LQ as an additive in warm mix asphalt technology. Jurnal Teknik Sipil, 27(3), 209. https://doi.org/10.5614/jts.2020.27.3.1

Irfan, Subagio, B. S., Hariyadi, E. S., & Maha, I. (2021). Performance evaluation of Pre-Vulcanized Liquid Natural Rubber (Pvlnr) in hot mix asphaltic concrete. International Journal of GEOMATE, 20(78), 107–114. https://doi.org/10.21660/2021.78.j2029

Kementerian Pekerjaan Umun Direktorat Jenderalbina Marga. (2018). Laston interim special specifications for asphalt with rubber (No. SKh-1.6.25). Indonesia.

Kheradmand, B., Muniandy, R., Hua, L. T., Yunus, R. B., & Solouki, A. (2014). An overview of the emerging warm mix asphalt technology. International Journal of Pavement Engineering, 15(1), 79–94. https://doi.org/10.1080/10298436.2013.839791

Kohjiya, S., & Ikeda, Y. (Eds). (2014). Chemistry, manufacture and applications of natural rubber. Woodhead Publishing Limited.

Kristjánsdottir, Ó., Muench, S. T., Michael, L., & Burke, G. (2007). Assessing potential for warm-mix asphalt technology adoption. Transportation Research Record: Journal of the Transportation Research Board, 2040(1), 91–99. https://doi.org/10.3141/2040-10

Leng, Z., Yu, H., Zhang, Z., & Tan, Z. (2017). Optimizing the mixing procedure of warm asphalt rubber with wax-based additives through mechanism investigation and performance characterization. Construction and Building Materials, 144, 291–299. https://doi.org/10.1016/j.conbuildmat.2017.03.208

Maha, I., Subagio, B. S., Affendi, F., & Rahman, H. (2015). Kinerja Campuran Beraspal Hangat Laston Lapis Pengikat (AC-BC) dengan Re-claimed Asphalt Pavement (RAP). Jurnal Teknik Sipil, 22(1), 57–66. https://doi.org/10.5614/jts.2015.22.1.7

Marković, G., & Visakh, P. M. (Eds). (2017). Rubber nano blends. Preparation, characterization and applications. Springer. https://doi.org/10.1007/978-3-319-48720-5

Martinho, F. C. G., Picado-Santos, L. G., & Capitão, S. D. (2017). Mechanical properties of warm-mix asphalt concrete containing different additives and recycled asphalt as constituents applied in real production conditions. Construction and Building Materials, 131, 78–89. https://doi.org/10.1016/j.conbuildmat.2016.11.051

Norouzi, N., Ameli, A., & Babagoli, R. (2021). Investigation of fatigue behaviour of warm modified binders and warm-stone matrix asphalt (WSMA) mixtures through binder and mixture tests. International Journal of Pavement Engineering, 22(8), 1042–1051. https://doi.org/10.1080/10298436.2019.1659262

National Standardization Agency. (2011a). How to test asphalt penetration (SNI 2456:2011). Indonesian National Standard for Testing.

National Standardization Agency. (2011b). How to test the softening point of asphalt with a ring and ball tool (ring and ball) (SNI 2434:2011). Indonesian National Standard for Testing.

National Standardization Agency. (2011c). How to test the specific gravity of hard asphalt (SNI 2441:2411). Indonesian National Standard for Testing.

National Standardization Agency. (2011d). How to test asphalt ductility (SNI 2432:2011). Indonesian National Standard for Testing.

National Standardization Agency. (2011e). How to test the flash point and burn point of asphalt with the Cleveland Open Cup tool (SNI 2433:2011). Indonesian National Standard for Testing.

National Standardization Agency. (n.d.). Solid asphalt density test method (SNI 06-2441-1991). Indonesian National Standard for Testing.

Petrauskas, D., & Saleem, U. (2015). Manufacture and storage of bitumens. In R. N. Hunter, A. Self, & J. Read (Eds.), The Shell bitumen hand-book (6th ed.). Thomas Telford.

Pojanavaraphan, T., & Magaraphan, R. (2008). Prevulcanized natural rubber latex / clay aerogel nanocomposites. European Polymer Journal, 44(7), 1968–1977. https://doi.org/10.1016/j.eurpolymj.2008.04.039

Poovaneshvaran, S., Mohd Hasan, M. R., & Putra Jaya, R. (2020). Impacts of recycled crumb rubber powder and natural rubber latex on the modified asphalt rheological behaviour, bonding, and resistance to shear. Construction and Building Materials, 234, 117357. https://doi.org/10.1016/j.conbuildmat.2019.117357

Prastanto, H., Firdaus, Y., Puspitasari, S., & Ramadhan, A. (2018). Sifat fisika aspal modifikasi karet al.m pada berbagai. Jurnal Penelitian Karet, 36(1), 65–76. https://doi.org/10.22302/ppk.jpk.v36i1.444

Rezvan, B., & Hassan, Z. (2017). Evaluation of rutting performance of stone matrix asphalt mixtures containing warm mix additives. Journal of Central South University, 24(2), 360–373. https://doi.org/10.1007/s11771-017-3438-4

Sasidharan, K. K., Joseph, R., Palaty, S., Gopalakrishnan, K. S., Rajammal, G., & Pillai, P. V. (2004). Effect of the vulcanization time and storage on the stability and physical properties of sulfur-prevulcanized natural rubber latex. Journal of Applied Polymer Science, 97(5), 1804–1811. https://doi.org/10.1002/app.21918

Visakh, P. M., Mathew, A. P, & Thomas, S. (2013). Natural polymers: Their blends, composites and nanocomposites: State of art, new challenges and opportunities. In S.Thomas, P. Visakh, & A. Mathew (Eds.), Advances in natural polymers: Vol. 18. Advanced structured materials (pp. 1–20). Springer. https://doi.org/10.1007/978-3-642-20940-6_1

Wang, Y. P. E., Zhao, K., Glover, C., Chen, L., Wen, Y., Chong, D., & Hu, C. (2015). Effects of aging on the properties of asphalt at the nanoscale. Construction and Building Materials, 80, 244–254. https://doi.org/10.1016/j.conbuildmat.2015.01.059

Wang, H., Liu, X., Apostolidis, P., & Scarpas, T. (2018). Review of warm mix rubberized asphalt concrete: Towards a sustainable paving technology. Journal of Cleaner Production, 177, 302–314. https://doi.org/10.1016/j.jclepro.2017.12.245

Wen, G., Zhang, Y., Zhang, Y., Sun, K., & Fan, Y. (2002). Improved properties of SBS-modified asphalt with dynamic vulcanization. Polymer Engineering and Science, 42(5), 1070–1081. https://doi.org/10.1002/pen.11013

Wen, Y., Wang, Y., Zhao, K., & Sumalee, A. (2017). The use of natural rubber latex as a renewable and sustainable modifier of asphalt binder. International Journal of Pavement Engineering, 18(6), 547–559. https://doi.org/10.1080/10298436.2015.1095913

Yang, X., Lecturer, P. D., You, Z., Ph, D., E, P., Rosli, M., Hasan, M., Lecturer, P. D., Diab, A., & Assistant, P. D. (2017). Environmental and mechanical performance of crumb rubber modified warm mix asphalt using Evotherm. Journal of Cleaner Production, 159, 346–358. https://doi.org/10.1016/j.jclepro.2017.04.168

Yin, F., Arambula, E., Lytton, R., Martin, A. E., & Cucalon, L. G. (2014). Novel method for moisture susceptibility and rutting evaluation using Hamburg wheel tracking test. Transportation Research Record: Journal of the Transportation Research Board, 2446(1), 1–7. https://doi.org/10.3141/2446-01

Yu, H., Leng, Z., Zhou, Z., Shih, K., Xiao, F., & Gao, Z. (2017). Optimization of preparation procedure of liquid warm mix additive modified asphalt rubber. Journal of Cleaner Production, 141, 336–345. https://doi.org/10.1016/j.jclepro.2016.09.043

Zhou, F., Scullion, T., & Sun, L. (2004). Verification and modeling of three-stage permanent deformation behavior of asphalt mixes. Journal of Transportation Engineering, 130(4), 486–494. https://doi.org/10.1061/(ASCE)0733-947X(2004)130:4(486)

Ziari, H., Babagoli, R., & Razi, S. E. T. (2015). The evaluation of rheofalt as a warm mix asphalt additive on the properties of asphalt binder. Petroleum Science and Technology, 33(21–22), 1781–1786. https://doi.org/10.1080/10916466.2015.1091841

Zurni, R., Subagio, B., Hariyadi, E., & Rahman, H. (2013). The resilient modulus and plastic deformation performance of hot mix recycling asphalt (HMRA) using Modified Binder Elvaloy®. Journal of the Eastern Asia Society for Transportation Studies, 10, 1523–1536. https://doi.org/10.11175/easts.10.1523