Share:


Empirical shear based model for predicting plate end debonding in FRP strengthened RC beams

    Ahmed K. El-Sayed   Affiliation
    ; Mohammed A. Al-Saawani   Affiliation
    ; Abdulaziz I. Al-Negheimish   Affiliation

Abstract

This paper presents the development of a simplified model for predicting plate end (PE) debonding capacity of reinforced concrete (RC) beams flexurally strengthened using fiber reinforced polymers (FRP). The proposed model is based on the concrete shear strength of the beams considering main parameters known to affect the opening of the shear cracks and consequently affect PE debonding. The model considers also the effect of the location of the cut-off point of FRP plate along the span of the beam. The proposed model was verified against experimental database of 128 FRP-strengthened beams collected from previous studies that failed in PE debonding. In addition, the predictions of the proposed model were also compared with those of the existing PE debonding models. The predictions of the model were found to be comparable to the best predictions provided by the existing models, yet the proposed model is simpler. Furthermore, the proposed model was combined with the ACI 440 IC debonding equation to provide a procedure for predicting the governing debonding failure mode in FRP strengthened RC beams. The procedure was validated against 238 beam tests available in the literature, and shown to be a reliable approach.

Keyword : beams, concrete, fiber-reinforced polymer, plate-end debonding, prediction model, strengthening

How to Cite
El-Sayed, A. K., Al-Saawani, M. A., & Al-Negheimish, A. I. (2021). Empirical shear based model for predicting plate end debonding in FRP strengthened RC beams. Journal of Civil Engineering and Management, 27(2), 117-138. https://doi.org/10.3846/jcem.2021.14304
Published in Issue
Feb 19, 2021
Abstract Views
671
PDF Downloads
503
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Achintha, M., & Burgoyne, C. J. (2011). Fracture mechanics of plate debonding: Validation against experiment. Construction and Building Materials, 25(6), 2961–2971. https://doi.org/10.1016/j.conbuildmat.2010.11.103

Achintha, P. M. M., & Burgoyne, C. J. (2008). Fracture mechanics of plate debonding. Journal of Composites for Construction, 12(4), 396–404. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:4(396)

Ahmed, O. A. F. (2000). Strengthening of R. C. beams by means of externally bonded CFRP laminates: Improved model for plateend shear [PhD Thesis]. Department of Civil Engineering, Catholicke University of Leuven, Belgium.

Ahmed, O., & Van Gemert, D. (1999). Effect of longitudinal carbon fiber reinforced plastic laminates on shear capacity of reinforced concrete beams. Proceedings of the Fourth International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures. Maryland, USA.

Alfano, G., De Cicco, F., & Prota, A. (2012). Intermediate debonding failure of RC beams retrofitted in flexure with FRP: experimental results versus predictions of codes of practice. Journal of Composites for Construction, 16(2), 185–195. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000250

Al-Negheimish, A., El-Sayed, A., Al-Zaid, R., Shuraim, A., & Alhozaimy, A. (2012). Behavior of wide shallow RC beams strengthened with CFRP reinforcement. Journal of Composites for Construction, 16(4), 418–429. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000274

Al-Saawani, M., El-Sayed, A., & Al-Negheimish, A. (2015). Effect of basic design parameters on IC debonding of CFRPstrengthened shallow RC beams. Journal of Reinforced Plastics and Composites, 34(18), 1526–1539. https://doi.org/10.1177/0731684415593816

Al-Tamimi, A., Hawileh, R. J., & Rasheed, H. (2011). Effects of ratio of CFRP plate length to shear span and end anchorage on flexural behavior of SCC RC beams. Journal of Composites and Construction, 15(6), 908–919. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000221

American Concrete Institute. (2002). Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures (ACI 440.2R). Farmington Hills, Michigan, USA.

American Concrete Institute. (2014). Building code requirements for structural concrete and commentary (ACI 318). Farmington Hills, USA.

American Concrete Institute. (2017). Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures (ACI 440.2R). Farmington Hills, Michigan, USA.

Aram, M., Czaderski, C., & Motavalli, M. (2012). Debonding failure modes of flexural FRP-strengthened RC beams. Composites Part B: Engineering, 39, 826–841. https://doi.org/10.1016/j.compositesb.2007.10.006

Arduini, M., Di Tommaso, A., & Nanni, A. (1997). Brittle failure in FRP plate and sheet bonded beams. ACI Structural Journal, 94(4), 363–370. https://doi.org/10.14359/487

Beber, A. J., Filho, A. C., & Campagnolo, J. L. (1999). Flexural strengthening of R/C beams with CFRP sheets. Proceedings of the Eighth International Conference on Advanced Composites for Concrete Repair, London, UK.

Benjeddou, O., Ouezdou, M. B., Bedday, A. (2007). Damaged RC beams repaired by bonding of CFRP laminates. Construction and Building Materials, 21, 1301–1310. https://doi.org/10.1016/j.conbuildmat.2006.01.008

Blaschko, M. (1997). Strengthening with CFRP. In Münchner Massivbau Seminar, TU München (in German).

Bonacci, J. F., & Maalej, M. (2000). Externally bonded fiberreinforced polymer for rehabilitation of corrosion damaged concrete beams. ACI Structural Journal, 97(5), 703–711. https://doi.org/10.14359/8805

Breña, S. F., & Macri, B. M. (2004). Effect of carbon-fiber-reinforced polymer laminate configuration on the behavior of strengthened reinforced concrete beams. Journal of Composites for Construction, 8(3), 229–240. https://doi.org/10.1061/(ASCE)1090-0268(2004)8:3(229)

Breña, S., Bramblett, R., Wood, S., & Kreger, M. (2003). Increasing flexural capacity of reinforced concrete beams using carbon fiber-reinforced polymer composites. ACI Structural Journal, 100(1), 36–46. https://doi.org/10.14359/12437

Ceroni, F. (2010). Experimental performances of RC beams strengthened with FRP materials. Construction and Building Materials, 24, 1547–1559. https://doi.org/10.1016/j.conbuildmat.2010.03.008

Ceroni, F., Manfredi, G., & Pecce, M. (2001). Crack widths in RC beams strengthened with carbon fabrics. Proceedings of FRPRCS-5, Cambridge.

Chan, T. K., Cheong, H. K., & Nguyen, D. M. (2001). Experimental investigation on delamination failure of CFRP strengthened beams. In Proceedings of ICCMC/IBST International Conference on Advanced Technologies in Design, Construction, and Maintenance of Concrete Structures, Hanoi, Vietnam.

Colotti, V., Spadea, G., & Swamy, R. N. (2004). Structural model to predict the failure behavior of plated reinforced concrete beams. Journal of Composites for Construction, 8(2), 104–122. https://doi.org/10.1061/(ASCE)1090-0268(2004)8:2(104)

Concrete Society. (2012). Design guidance for strengthening concrete structures using fibre composite materials (Technical Report No. 55). Crowthorne, UK.

David, E., Djelal, C., Ragneau, E., & Bodin, F. B. (1999). Use of FRP to strengthen and repair RC beams: experimental study and numerical simulations. In Proceedings of the Eighth International Conference on Advanced Composites for Concrete Repair, London, UK.

El-Sayed, A. K. (2014). Effect of longitudinal CFRP strengthening on the shear resistance of reinforced concrete beams. Journal of Composites Part B: Engineering, 58, 422–429. https://doi.org/10.1016/j.compositesb.2013.10.061

Esfahani, M. R., Kianoush, M. R., & Tajari, A. R. (2007). Flexural behavior of reinforced concrete beams strengthened by CFRP sheets. Engineering Structures, 29, 2428–2444. https://doi.org/10.1016/j.engstruct.2005.09.011

European Committee for Standardization. (2004). Eurocode 2: Design of concrete structures – Part 1-1: General rules and rules for buildings (EN 1992-1-1).

Fanning, P. J., & Kelly, O. (2001). Ultimate response of RC beams strengthened with CFRP plates. Journal of Composites for Construction, 5(2), 122–127. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:2(122)

Gao, B., Kim, J. K., & Leung, C. K. Y. (2004a). Taper ended FRP strips bonded to RC beams: Experiments and FEM analysis. In Proceedings of the Second International Conference on FRP in Civil Engineering (pp. 399–405). https://doi.org/10.1201/9780203970850.ch43

Gao, B., Kim, J. K., & Leung, C. K. Y. (2004b). Experimental study on RC beams with FRP strips bonded with rubber modified resins. Composite Science and Technology, 64, 2557–2564. https://doi.org/10.1016/j.compscitech.2004.05.016

Gao, B., Leung, W., Cheung, C., Kim, J. K., & Leung, C. K. Y. (2001). Effects of adhesive properties on strengthening of concrete beams with composite strips. In Proceedings of the International Conference on FRP composites in Civil Engineering (pp. 423–432). Elsevier.

Garden, H. N., Hollaway, L. C., & Thorne, A. M. (1997). A preliminary evaluation of carbon fibre reinforced polymer plates for strengthening reinforced concrete members. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 123, 127–142. https://doi.org/10.1680/istbu.1997.29302

Garden, H. N., Quantrill, R. J., Hollaway, L. C., Thorne, A. M., & Parke, G. A. R. (1998). An experimental study of the anchorage length of carbon fiber composite plates used to strengthen reinforced concrete beams. Construction and Building Materials, 12(4), 203–219. https://doi.org/10.1016/S0950-0618(98)00002-6

Grace, N. F., & Singh, S. B. (2005). Durability evaluation of carbon fiber-reinforced polymer strengthened concrete beams: experimental study and design. ACI Structural Journal, 102(1), 40–48. https://doi.org/10.14359/13529

Hasnat, A., Islam, M., & Amin, A. (2016). Enhancing the debonding strain limit for CFRP-strengthened RC beams using U-clamps: Identification of design parameters. Journal Composites Construction, 20(1), 04015039-1–04015039-16. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000599

Hau, K. M. (1999). Experiments on concrete beams strengthened by bonding fibre reinforced plastic sheets [MSc in Civil Engineering thesis]. The Hong Kong Polytechnic University, Hong Kong, China.

Hong, S. (2014). Effect of intermediate crack debonding on the flexural strength of CFRP-strengthened RC beams. Mechanics of Composite Materials, 50(4), 523–536. https://doi.org/10.1007/s11029-014-9439-6

International Federation for Structural Concrete. (2001). Externally bonded FRP reinforcement for RC structures (fib Bulletin 14). Lausanne, Switzerland.

Jansze, W. (1997). Strengthening of RC members in bending by externally bonded steel plates [PhD thesis]. Delft University of Technology.

Kani, G. N. J. (1999). Basic facts concerning shear failure. ACI Journal Proceedings, 63(6), 675–692.

Kishi, N., Mikami, H., & Zhang, G. (2003). Numerical analysis of debonding behavior of FRP sheet for flexural strengthening RC beams. Proceedings of Japan Society of Civil Engineers, 255–272. https://doi.org/10.2208/jscej.2003.725_255

Kishi, N., Mikami, H., Sato, M., & Matsuoka, K. (1998). Bending bond strength of RC beams strengthened with FRP sheet. Procurement of Japan Concrete Institute, 20, 515–520.

Kotynia, R. (2005). Debonding failures of RC beams strengthened with externally bonded strips. Proceedings of the International Symposium on Bond Behavior of FRP in Structures, 247–252.

Kotynia, R., Abdel Baky, H., Neale, K., Ebead, U. (2008). Flexural strengthening of RC beams with externally bonded CFRP systems: Test results and 3D nonlinear FE analysis. Journal of Composites for Construction, 12(2), 190–201. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:2(190)

Kurihashi, Y., Kishi, N., Mikami, H., Matsuoka, K. (1999). Flexurally bonding property of FRP sheet on RC beam with twopoint loading. Procurement of Japan Concrete Institute, 21, 1555–1560.

Kurihashi, Y., Kishi, N., Mikami, H., & Matsuoka, K. (2000). Sheet volume effects on flexural bonding property of RC beams strengthened with FRP sheet. Proceedings of Japan Concrete Institute, 22, 481–486.

Maalej, M., & Bian, Y. (2001). Interfacial shear stress concentration in FRP-strengthened beams. Composite Structures, 54, 417–426. https://doi.org/10.1016/S0263-8223(01)00078-2

Maalej, M., & Leong, K. S. (2005). Effect of beam size and FRP thickness on interfacial shear stress concentration and failure mode of FRP-strengthened beams. Composite Science and Technology, 65(7–8), 1148–1158. https://doi.org/10.1016/j.compscitech.2004.11.010

Maeda, T., Komaki, H., Tsubouchi, K., & Murakami, K. (2001). Strengthening behavior of carbon fiber sheet using flexible layer. Proceedings of Japan Concrete Institute, 23, 817–822.

Matthys, S. (2000). Structural behavior and design of concrete beams strengthened with externally bonded FRP reinforcement [PhD thesis]. Ghent University.

National Research Council. (2013). Guide for the design and construction of externally bonded FRP systems for strengthening existing structures (CNR-DT 200 R1). Rome, Italy.

Nguyen, D. M., Chan, T. K., & Cheong, H. K. (2001). Brittle failure and bond development length of CFRP–concrete beams. Journal of Composites for Construction, 5(1), 12–17. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:1(12)

Niu, H., Vasquez, A., Karbhari, V. M. (2006). Effect of material configuration on strengthening of concrete slabs by CFRP composites. Composites Part B: Engineering, 37(2–3), 213–226. https://doi.org/10.1016/j.compositesb.2005.05.015

Oehlers, D. J. (1992). Reinforced concrete beams with plates glued to their soffits. Journal of Structural Engineering, 118(8), 2023–2038. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:8(2023)

Oehlers, D. J., Liu, I. S. T., & Seracino, R. (2005). Shear deformation debonding of adhesively bonded plates. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 158(1), 77–84. https://doi.org/10.1680/stbu.2005.158.1.77

Oehlers, D. J., Liu, I. S. T., Seracino, R., & Mohamed Ali, M. S. (2004). Prestress model for shear deformation debonding of FRP- and steel-plated RC beams. Magazine of Concrete Research, 56(8), 475–486. https://doi.org/10.1680/macr.2004.56.8.475

Pham, H. B., & Al-Mahaidi, R. (2006). Prediction models for debonding failure loads of carbon fiber reinforced polymer retrofitted reinforced concrete beams. Journal of Composites for Construction, 10(1), 48–59. https://doi.org/10.1061/(ASCE)1090-0268(2006)10:1(48)

Quantrill, R. J., Hollaway, L. C., & Thorne, A. M. (1996). Experimental and analytical investigation of FRP strengthened beam response: Part I. Magazine of Concrete Research, 48, 331–342. https://doi.org/10.1680/macr.1996.48.177.331

Rahimi, H., & Hutchinson, A. (2001). Concrete beams strengthened with externally bonded FRP plates. Journal of Composites for Construction, 5(1), 44–56. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:1(44)

Rebeiz, K. S. (1999). Shear strength prediction for concrete members. Journal of Structural Engineering, 125(3), 301–308. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:3(301)

Ritchie, P. A., Thomas, D. A., Lu, L. W., & Conelly, G. M. (1991). External reinforcement of concrete beams using fibre reinforced plastics. ACI Structural Journal, 88(4), 490–500. https://doi.org/10.14359/2723

Saadatmanesh, H., & Ehsani, M. R. (1991). RC beams strengthened with GFRP plates I: experimental study. Journal of Structural Engineering, 117(11), 3417–3433. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:11(3417)

Sadrmomtazi, A., Rasmi Atigh, H., & Sobhan, J. (2014). Experimental and analytical investigation on bond performance of the interfacial debonding in flexural strengthened RC beams with CFRP sheets at tensile face. Asian Journal of Civil Engineering (BHRC), 15(3), 391–410.

Sakr, M. A. (2018). Finite element modeling of debonding mechanisms in carbon fiber reinforced polymer-strengthened reinforced concrete continuous beams. Structural Concrete, 19(4), 1002–1012. https://doi.org/10.1002/suco.201700011

Seim, W., Horman, M., Karbhari, V., & Seible, F. (2001). External FRP post-strengthening of scaled concrete slabs. Journal of Composites for Construction, 5(2), 67–75. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:2(67)

Shin, Y. S., & Lee, C. (2003). Flexural behavior of reinforced concrete beams strengthened with carbon fiber-reinforced polymer laminates at different levels of sustaining load. ACI Structural Journal, 100(2), 231–239. https://doi.org/10.14359/12487

Skuturna, T., & Valivonis, J. (2016). Experimental study on the effect of anchorage systems on RC beams strengthened using FRP. Composites Part B: Engineering, 91, 283–290. https://doi.org/10.1016/j.compositesb.2016.02.001

Smith, S. T., & Teng, J. G. (2002a). FRP-strengthened RC beams. I: Assessment of debonding strength models. Engineering Structures, 24(4), 385–395. https://doi.org/10.1016/S0141-0296(01)00105-5

Smith, S. T., & Teng, J. G. (2002b). FRP-strengthened RC beams. II: Assessment of debonding strength models. Engineering Structures, 24(4), 397–417. https://doi.org/10.1016/S0141-0296(01)00106-7

Smith, S. T., & Teng, J. G. (2003). Shear-bending interaction in debonding failures of FRP-plated RC beams. Advances in Structural Engineering, 6(3), 183–199. https://doi.org/10.1260/136943303322419214

Spadea, G., Swamy, R. N., Bencardino, F. (2001). Strength and ductility of RC beams repaired with bonded CFRP laminates. Journal of Bridge Engineering, 6(5), 349–355. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:5(349)

Standards Australia. (1988). Concrete structures (AS 3600). Sydney, Australia.

Standards Australia. (2017a). Bridge design, Part 5: Concrete (AS 5100.5). SA1 Global Limited, Australia.

Standards Australia. (2017b). Bridge design, Part 8: Rehabilitation and strengthening of existing bridges (AS 5100.8). SA1 Global Limited, Australia.

Takahashi, Y., & Sato, Y. (2003). Flexural behavior of RC beams externally reinforced with carbon fiber sheets. In Proceedings of FRPRCS-6 – Fibre-reinforced Polymer Reinforcement for Concrete Structures (pp. 237–246). https://doi.org/10.1142/9789812704863_0020

Takeo, K., Matsushita, H., Sagawa, Y., & Ushigome, T. (1999). Experiment of RC beam reinforced with CFRP adhesive method having variety of shear-span ratio. Procurement of Japan Concrete Institute, 21, 205–210.

Teng, J. G., & Yao, J. (2007). Plate end debonding in FRP-plated RC beams – II: Strength model. Engineering Structures, 29(10), 2472–2486. https://doi.org/10.1016/j.engstruct.2006.11.023

Tumialan, G., Serra, P., Nanni, A., & Belarbi, A. (1999). Concrete cover delamination in reinforced concrete beams strengthened with carbon fiber reinforced polymer sheets. In Proceedings of the Fourth International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures (pp. 725–735). Maryland, USA.

Valcuende, M., Benlloch, J., & Parra, C. J. (2003). Ductility of reinforced concrete beams strengthened with CFRP strips and fabric. In Proceedings of the Sixth International Symposium on FRP Reinforcement for Concrete Structures (pp. 337–346). https://doi.org/10.1142/9789812704863_0030

Yao, J., & Teng, J. G. (2007). Plate end debonding in FRP-plated RC beams – I: Experiments. Engineering Structures, 29(10), 2457–2471. https://doi.org/10.1016/j.engstruct.2006.11.022

Zarnic, R., Gostic, S., Bosiljkov, V., & Bokan-Bosiljkov, V. (1999). Improvement of bending load-bearing capacity by externally bonded plates. In Proceedings of Creating with Concrete (pp. 433–442). https://doi.org/10.1680/stamfcc.28258.0041

Zhang, G. F., Kishi, N., Mikami, H., & Komuro, M. (2005). A numerical prediction method for flexural behavior of RC beams reinforced with FRP sheet. In Proceedings of the International Symposium on Bond Behaviour of FRP in Structures (pp. 215–220).

Zhang, S. S., & Teng, J. G. (2016). End cover separation in RC beams strengthened in flexure with bonded FRP reinforcement: simplified finite element approach. Materials and Structures, 49, 2223–2236. https://doi.org/10.1617/s11527-015-0645-z

Zhang, S. S., & Teng, J. G. (2014). Finite element analysis of end cover separation in RC beams strengthened in flexure with FRP. Engineering Structures, 75, 550–560. https://doi.org/10.1016/j.engstruct.2014.06.031

Zsutty, T. (1971). Shear strength prediction for separate categories of simple beam tests. ACI Structural Journal, 68(2), 138–143. https://doi.org/10.14359/11300