Share:


Behavior of pre-stressed intersecting cable steel bridge

Abstract

Cable-stayed bridges are known as one of the most effective and graceful forms of bridges. The main problem in the design of cable-stayed steel bridges is their deformability, especially under asymmetrical loads. Stabilization of the initial form of cable-stayed bridges can be achieved by selecting the appropriate cross-sectional area of the cables and their pre-stressing, as well as by increasing the cross-sectional height of the stiffness beam. However, a greater effect can be achieved by applying new forms of such bridges. Solutions for such bridges with an atypical arrangement of cables and additional pylons are already applied in practice. The article discusses an innovative pre-tensioned intersecting cable steel bridge structure system. The behavior of this bridge system under permanent and temporary loads is analyzed. Based on the performed numerical experiment, the efficiency of the innovative cable-stayed steel bridge system was determined. This newly designed bridge system is more effective in terms of stress and displacement distribution than a classic cable-stayed bridge system.


First published online 10 January 2023

Keyword : cable-stayed bridge, steel bridge, intersecting cables, non-linear analysis, stresses, displacements, pre-stressing

How to Cite
Dabrila, P. (2021). Behavior of pre-stressed intersecting cable steel bridge. Engineering Structures and Technologies, 13(1), 19–25. https://doi.org/10.3846/est.2021.18402
Published in Issue
Dec 31, 2021
Abstract Views
136
PDF Downloads
114
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Beivydas, E. (2019). A simplified calculation method for symmetrical loading of a single-span composite string steel structure. Engineering Structures and Technologies, 11(2), 70–73. https://doi.org/10.3846/est.2019.11323

Brownlie, K., Curran, P., & Thompson, S. (2008, July). Forthside Bridge, Stirling, Scotland [Conference presentation]. Footbridge 2008 – Footbridges for Urban Renewal, Third International Conference on Footbridges. Porto, Portugal.

Cid, C., Baldomir, A., & Hernández, S. (2018). Optimum crossing cable system in multi-span cable-stayed bridges. Engineering Structures, 160, 342–355. https://doi.org/10.1016/j.engstruct.2018.01.019

European Committee for Standardization. (2006). Eurocode 3: Design of steel structures – Part 1-11: Design of structures with tension component (EN 1993-1-11:2006). Brussels.

Evans, G. J. (2009). A critical analysis of Wilkinson Eyre’s sail bridge Swansea. In Proceedings of Bridge Engineering 2 Conference. Bath, UK.

Ferreira, F., & Simoes, L. (2019). Optimum design of a cable-stayed steel footbridge with three-dimensional modelling and control devices. Engineering Structures, 180, 510–523. https://doi.org/10.1016/j.engstruct.2018.11.038

Gimsing, N. J., & Georgakis, C. T. (2012). Cable support bridges: Concept and design (3rd ed.). John Wiley & Sons Ltd. https://doi.org/10.1002/9781119978237

Lee, T.-Y., Kim, Y.-H., & Kang, S.-W. (2008). Optimization of tensioning strategy for asymmetric cable-stayed bridge and its effect on construction process. Structural and Multidisciplinary Optimization, 35, 623–629. https://doi.org/10.1007/s00158-007-0172-9

Malinowski, M., Banas, A., Jeszka, M., & Sitarski, A. (2018). Imaginative footbridge in Mikolajki, Poland. Stahlbau, 87(3), 248–255. https://doi.org/10.1002/stab.201810582

Martins, A. M. B., Simões, L. M. C., & Negrão, J. H. J. O.(2020). Optimization of cable-stayed bridges: A literature survey. Advances in Engineering Software, 149, 102829. https://doi.org/10.1016/j.advengsoft.2020.102829

Pearce, M., & Jobson, R. (2002). Bridge builders (pp. 122–127). Wiley.

Reis, A. J., & Oliveira Pedro, J. J. (2019). Bridge design: Concepts and analysis. John Wiley & Sons, Ltd. https://doi.org/10.1002/9781118927595

Robin, C., Aubeeluck, G., De Kosmi, B., & Datry, J.-B. (2014, July). The “Grand Large” footbridge: New masts in Dunkirk. In Footbridge 2014 – Past, Present & Future (pp. 264–265). London.

Song, C., Xiao, R., & Sun, B. (2018). Optimization of cable pre-tension forces in long-span cable-stayed bridges considering the counterweight. Engineering Structures, 172, 919–928. https://doi.org/10.1016/j.engstruct.2018.06.061

Strasky, J. (2005). Stress ribbon and cable-supported pedestrian bridges. Thomas Telford Ltd.

Straupe, V., & Paeglitis, V. (2012). Analysis of interaction between the elements in cable-stayed bridge. The Baltic Journal of Road and Bridge Engineering, 7(2), 84–91. https://doi.org/10.3846/bjrbe.2012.12

Svensson, H. (2012). Cable-stayed bridges: 40 years of experience worldwide. Ernst & Sohn. https://doi.org/10.1002/9783433601044

Walther, R., Houriet, B., & Izler, W. (1999). Cable stayed bridges. Thomas Telford Ltd.