Research of the micromechanics of composite materials with polymer matrix failure under static loading using the acoustic emission method

    Aleksandrs Urbahs Info
    Muharbijs Banovs Info
    Kristine Carjova Info
    Vladislav Turko Info
    Jurijs Feshchuk Info

Abstract

Micromechanics of composite materials’ failure has been investigated under static loading by means of acoustic emission (AE) method. The results showed that for samples made of fiberglass with transverse fibers with respect to the applied load, the process of destruction both in the deformation parameters and in the parameters of total AE has two stages of damage accumulation. At the same time the parameter of total AE shows that the process of destruction begins 5–6% earlier than it is shown by the deformation parameter. Also the nature of the total AE change was analysed.

Keywords:

composite materials, polymer matrix, static loading, acoustic emission, micromechanics

How to Cite

Urbahs, A., Banovs, M., Carjova, K., Turko, V., & Feshchuk, J. (2017). Research of the micromechanics of composite materials with polymer matrix failure under static loading using the acoustic emission method. Aviation, 21(1), 9-16. https://doi.org/10.3846/16487788.2016.1264720

Share

Published in Issue
March 27, 2017
Abstract Views
725

View article in other formats

CrossMark check

CrossMark logo

Published

2017-03-27

Issue

Section

Articles

How to Cite

Urbahs, A., Banovs, M., Carjova, K., Turko, V., & Feshchuk, J. (2017). Research of the micromechanics of composite materials with polymer matrix failure under static loading using the acoustic emission method. Aviation, 21(1), 9-16. https://doi.org/10.3846/16487788.2016.1264720

Share