The influence of the cetane number and lubricity improving additives on the quality parameters of aviation-turbine fuel
Abstract
In order to recommend jet fuel for powering diesel engines the quality parameters of the following fuels were determined: diesel fuel (NATO code F-54) according to standard LST EN 590: 2014, jet fuel (NATO code F-35 and F-34) according to standard ASTM D 1655 and U.S.MIL-DTL-83133E, and jet fuel was treated with additives at the Centre of Quality research laboratory located at “ORLEN Lietuva” Ltd. Basic quality parameters of alternative jet fuels were analysed and compared with the reference parameters of diesel fuel. It was determined that the use of additives in jet fuel improves its parameters up to a level which satisfies the corresponding characteristics of normal diesel fuel: cetane number, lubricating properties, net heating value per unit of mass, sulphur content and, therefore, can be recommended for the use in land-based transport means and power generators.
Keywords:
diesel engine, jet fuel, diesel fuel, fuel property parametersHow to Cite
Share
License
Copyright (c) 2015 The Author(s). Published by Vilnius Gediminas Technical University.
This work is licensed under a Creative Commons Attribution 4.0 International License.
View article in other formats
Published
Issue
Section
Copyright
Copyright (c) 2015 The Author(s). Published by Vilnius Gediminas Technical University.
License
This work is licensed under a Creative Commons Attribution 4.0 International License.