The interplay between geometry and numbers of blade in ducted propeller systems

DOI: https://doi.org/10.3846/aviation.2025.24889

Abstract

This study designs and optimizes a ducted propeller (DP) via graphical and numerical methods. Ducted propellers with a thrust-to-omega ratio ranging between 0.12 and 0.20 and blade optimizations at the design point were obtained. The geometric selection of the blade path has a significant effect on the airflow in the duct system. Reasonable optimization of the dimensions of the sheath, tube, and curvature can effectively improve the axial flow. For different aerodynamic loads, the corresponding graphs are produced. Therefore, the number of blades increases, and the overall stall margin is expanded for a particular blade. The large discrepancy between the mechatronic properties of experimental and computational studies of DPs implies that the blade geometry can largely affect the mechatronic properties of DP models, thus offering a new direction for designing the development of propulsion systems. In this article, important studies on the impact of the blade geometry and number on DP thrust generation are discussed.

Keywords:

aerodynamic, thrust, optimal design, simulation, SolidWorks

How to Cite

Dzulfikar, M., Purwanto, H., Wahid, M. A., & Yudhistira, P. A. (2025). The interplay between geometry and numbers of blade in ducted propeller systems. Aviation, 29(3), 183–190. https://doi.org/10.3846/aviation.2025.24889

Share

Published in Issue
October 7, 2025
Abstract Views
10

References

Abbott, I. H., & Doenhoff, A. E. Von. (1959). Theory of wing sections: Including a summary of airfoil data. Dover Publications, Inc.

Akturk, A., & Camci, C. (2012). Experimental and computational assessment of a ducted-fan rotor flow model. Journal of Aircraft, 49(3), 885–897. https://doi.org/10.2514/1.C031562

Anderson, J. D., & Bowden, M. L. (2022). Introduction to flight (9th ed.). McGraw-Hill Education.

Brusell, A., Andrikopoulos, G., & Nikolakopoulos, G. (2017). Novel considerations on the negative pressure adhesion of electric ducted fans: An experimental study. In 25th Mediterranean Conference on Control and Automation (MED) (pp. 1404–1409). ResearchGate. https://doi.org/10.1109/MED.2017.7984315

Drela, M., & Youngren, H. (2005). Axisymmetric analysis and design of ducted rotors. In Theory Document of DFDC (pp. 1–20). https://web.mit.edu/drela/Public/web/dfdc/DFDCtheory12-31.pdf

Dzulfikar, M., Priangkoso, T., Setiawan, J. D., & Sportyawan, C. W. (2022). Analisis Propulsi Statik dari Electric Ducted Fan dengan Metode Eksperimental [Static propulsion analysis of electric ducted fan using experimental method]. Jurnal Ilmiah Momentum, 18(2), 124–127. https://doi.org/10.36499/jim.v18i2.7281

Fan, C., Adjei, R. A., & Wang, A. (2020). Parametric study on the aerodynamic performance of a ducted-fan rotor using free-form method. Aerospace Science and Technology, 101, Article 105842. https://doi.org/10.1016/j.ast.2020.105842

Ganesan, S., Esakki, B., Mathiyazhagan, S., & Pandimuthu, V. (2022). Design conception and evaluation of an unmanned amphibious aerial vehicle using systematic approach. Aviation, 26(1), 41–53. https://doi.org/10.3846/aviation.2022.16519

Geldenhuys, H. J. (2015). Aerodynamic development of a contra-rotating shrouded rotor system for a UAV. Stellenbosch University. http://hdl.handle.net/10019.1/97056

Giguère, P., & Selig, M. S. (1997). Low Reynolds number airfoils for small horizontal axis wind turbines. Wind Engineering, 21(6), 367–380.

Goudswaard, R. (2021). Aerodynamic performance of a small-scale ducted rotor in hover [Master Thesis, Delft University of Technology]. TU Delft.

Harada, M. (2018). Design of maximum thrust ducted fan. Journal of the Japan Society for Aeronautical and Space Sciences, 66(3), 75–83. https://doi.org/10.2322/jjsass.66.75

Hassen, A. E. (2021). Flow characterization in mine ventilation fan blade design using CFD. Journal of Sustainable Mining, 20(3), 144–156. https://doi.org/10.46873/2300-3960.1063

Iljaszewicz, P., Łusiak, T., Pastuszak, A., & Novak, A. (2020). Aerodynamic analysis of the aircraft model made with the 3D printing method. Transportation Research Procedia, 51, 118–133. https://doi.org/10.1016/j.trpro.2020.11.014

Jiang, H., Zhou, Y., & Ho, H. W. (2022). Aerodynamic design and evaluation of a ducted fan lift system for vertical takeoff and landing flying cars. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 237(1), 115–125. https://doi.org/10.1177/09576509221106395

Karpuk, S., Radespiel, R., & Elham, A. (2022). Assessment of future airframe and propulsion technologies on sustainability of next-generation mid-range aircraft. Aerospace, 9(5), Article 279. https://doi.org/10.3390/aerospace9050279

Kriebel, A. R., & Mendenhall, M. R. (1964). Predicted and measured performance of two full-scale ducted propellers. National Aeronautics and Space Administration.

Liu, T. (2021). Evolutionary understanding of airfoil lift. Advances in Aerodynamics, 3(1), Article 37. https://doi.org/10.1186/s42774-021-00089-4

Masashi, H. (2022). Theoretical background and user’s manual of ducted fan optimal design program, OptDuct. JAXA Research and Development Memorandum, 1, Article 49. https://doi.org/10.20637/00048250

Moeckel, W. E. (1963). Electric propulsion. Science, 142(3589), 172–178. https://doi.org/10.1126/science.142.3589.172

Muehlebach, M., & D’Andrea, R. (2017). The flying platform – a testbed for ducted fan actuation and control design. Mechatronics, 42, 52–68. https://doi.org/10.1016/j.mechatronics.2017.01.001

Nugroho, G., Bramantya, M. A., Ghani, M. A., Wang, S. S., & Kurniawan, Y. A. (2018). Design, manufacture and flight test of an Electric Ducted Fan (EDF) powered cruise missile. Journal of Physics: Conference Series, 1130(1), Article 012030. https://doi.org/10.1088/1742-6596/1130/1/012030

Panigrahi, D. C., & Mishra, D. P. (2014). CFD simulations for the selection of an appropriate blade profile for improving energy efficiency in axial flow mine ventilation fans. Journal of Sustainable Mining, 13(1), 15–21. https://doi.org/10.7424/jsm140104

Pope, A. (1951). Basic wing and airfoil theory (1st ed.). the McGraw-Hill Book Company, Inc.

Ryu, M., Cho, L., & Cho, J. (2017). The effect of tip clearance on performance of a counterrotating ducted fan in a VTOL UAV. Transactions of the Japan Society for Aeronautical and Space Sciences, 60(1), 1–9. https://doi.org/10.2322/tjsass.60.1

Schäfer, M. (2006). Computational engineering – introduction to numerical methods. Springer International Publishing. https://doi.org/10.1007/978-3-030-76027-4

Seitz, A. (2012). Advanced methods for propulsion system integration in aircraft conceptual design [Dissertation, Universitat Munchen]. http://mediatum.ub.tum.de/node?id=1079430

Selig, M. S. (2003). Low Reynolds number airfoil design. In VKI Lecture Series (Low Reynolds Number Aerodynamics on Aircraft Including Applications in Emerging UAV Technology, November). https://m-selig.ae.illinois.edu/pubs/Selig-2003-VKI-LRN-Airfoil-Design-Lecture-Series.pdf

Sharman, R. A. (2011). Electric ducted fan – theory and practice. RCME & Home of Model Flying.

SolidWorks. (n.d.). The solution for 3D CAD, design and product development. https://www.solidworks.com/

Stosiak, M., Zawislak, M., & Nishta, B. (2018). Studies of resistances of natural liquid flow in helical and curved pipes. Polish Maritime Research, 25(3), 123–130. https://doi.org/10.2478/pomr-2018-0103

Toguchi, T., Tanigawa, R., & Mizobata, K. (2016). Design and manufacture of a scaled-down small supersonic flight experimental aircraft and preliminary flight tests. Muroran Institute of Technology Aerospace Plane Research Center. http://hdl.handle.net/10258/00009117

Urban, D., Kusmirek, S., Socha, V., Hanakova, L., & Hylmar, K. (2023). Effect of electric ducted fans structural arrangement on their performance characteristics. Applied Sciences, 13(5), Article 2787. https://doi.org/10.3390/app13052787

van Rooij, N. E. (2019). Analysis of a 3D printed electric ducted fan for high-speed flight. Eindhoven University of Technology.

Versteeg, H. K., & Malalasekera, W. (2007). An introduction to computational fluid dynamics (2nd ed.). Pearson Education Limited.

Voogd, A. E. (2020). Experimental investigation of boundary layer ingestion in integrated propulsion systems. Delft University of Technology.

Weintraub, D., Koppelberg, J., Köhler, J., & Jeschke, P. (2022). Ducted fans for hybrid electric propulsion of small aircraft. CEAS Aeronautical Journal, 13(2), 471–485. https://doi.org/10.1007/s13272-022-00573-7

Weintraub, D. P. (2024). Mantelpropellerantriebe für Kleinflugzeuge [Ducted propeller drives for small aircraft]. Rheinisch-Westfälischen Technischen Hochschule Aachen.

Zhang, B., Song, Z., Zhao, F., & Liu, C. (2022). Overview of propulsion systems for unmanned aerial vehicles. Energies, 15(2), Article 455. https://doi.org/10.3390/en15020455

Zhang, T. (2022). Numerical investigation of ducted propellers for novel rotorcraft configurations [PhD thesis, University of Glasgow].

Zhang, T., & Barakos, G. N. (2020). Review on ducted fans for compound rotorcraft. The Aeronautical Journal, 124(1277), 941–974. https://doi.org/10.1017/aer.2019.164

View article in other formats

CrossMark check

CrossMark logo

Published

2025-10-07

Issue

Section

Articles

How to Cite

Dzulfikar, M., Purwanto, H., Wahid, M. A., & Yudhistira, P. A. (2025). The interplay between geometry and numbers of blade in ducted propeller systems. Aviation, 29(3), 183–190. https://doi.org/10.3846/aviation.2025.24889

Share