Structural method for determining deformations by geodetic measurements
DOI: https://doi.org/10.3846/gac.2019.6692Abstract
Industrial equipment is a dynamic system that deforms during installation (assembly) and during operation. Under the influence of variable load and mixing of the center of gravity of the equipment and foundations on which it is installed, uneven horizontal and vertical displacements occur, therefore individual equipment elements are unevenly deformed, which can lead to poor performance or stoppage of this equipment. Timely measurement of the displacement of certain points of equipment (deformations) of precision equipment with the help of geodetic and other methods and their correct use for correcting the geometry of the equipment will contribute to improving the operational properties and increasing the period of uninterrupted operation of equipment’s, for example, precision conveyor lines for assembling cars.
Keywords:
displacement of point’s equipment, deformations, relative deformationsHow to Cite
Share
License
Copyright (c) 2019 The Author(s). Published by Vilnius Gediminas Technical University.
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Burachek, V., Malik, T., Kryachok, S., Bryk, Y., & Belenok, V. (2018). Device for automated leveling. News of the National Academy of Sciences of the Republic of Kazakhstan, 5(431), 95-99. https://doi.org/10.32014/2018.2518-170X.13
Gladilin, V. (2016). Model of determining deformations. Astronomical Schools Report, 12(2), 185-189 (in Ukrainian). https://doi.org/10.18372/2411-6602.12.2185
Gladilin, V., & Chulanov, P. (2002). Research of model of deformation process of technological equipment. Engineering Geodesy, 48, 70-77 (in Ukrainian).
Gladilin, V., Chulanov, P., & Shudra, N. (2015). Determination of displacement of points is the result of the deformation of process equipment. Engineering Geodesy, 62, 44-55 (in Ukrainian).
Kasatkin, B. S., Kudrin, A. B., & Lobanov, L. M. (1981). Experimental methods of research of deformations and tensions. Kiev: Naukova dumka (in Ukrainian).
View article in other formats
CrossMark check
Published
Issue
Section
Copyright
Copyright (c) 2019 The Author(s). Published by Vilnius Gediminas Technical University.
License
This work is licensed under a Creative Commons Attribution 4.0 International License.